• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.516-521
• /
• 2012

This study developed a simple model to investigate effects of important operating parameters on performance of a bubbling-bed adsorber and regenerator system collecting $CO_2$ from flue gas. The chemical reaction rate was used with mean particles residence time of a reactor to determine the extent of conversion in both adsorber and regenerator reactors. Effects of process parameters - temperature, gas velocity, solid circulation rate, moisture content of feed gas - on $CO_2$ capture efficiency were investigated in a laboratory scale process. The $CO_2$ capture efficiency decreased with increasing temperature or gas velocity of the adsorber. However, it increased with increasing the moisture content of the flue gas or the regenerator temperature. The calculated $CO_2$ capture efficiency agreed to the measured value reasonably well. However the present model did not agree well to the effect of the solid circulation rate on $CO_2$ capture efficiency. Better understanding on contact efficiency between gas and particles was needed to interpret the effect properly.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.1
• /
• pp.19-30
• /
• 2014

For the expansion of the Semantic Web, studies in converting the data stored in the relational database into the ontology are actively in process. Such studies mainly use an RDB to RDF mapping model, the model to map relational database components to RDF components. However, pre-proposed mapping models have got different expression modes and these damage the accessibility and reusability of the users. As a consequence, the necessity of the standardized mapping language was raised and the W3C suggested the R2RML as the standard mapping language for the RDB to RDF model. The R2RML has a characteristic that converts only the relational database schema data to RDF. For the same reasons above, the ontology about the relation data between table name and column name of the relational database cannot be added. In this paper, we propose an RDB to RDF mapping system considering semantic relations of RDB components in order to solve the above issue. The proposed system generates the mapping data by adding the RDFS attribute data into the schema data defined by the R2RML in the relational database. This mapping data converts the data stored in the relational database into RDF which includes the RDFS attribute data. In this paper, we implement the proposed system as a Java-based prototype, perform the experiment which converts the data stored in the relational database into RDF for the comparison evaluation purpose and compare the results against D2RQ, RDBToOnto and Morph. The proposed system expresses semantic relations which has richer converted ontology than any other studies and shows the best performance in data conversion time.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.547-553
• /
• 2007

The catalytic cracking of n-octane over FER, MFI, MOR and BEA zeolites was studied by the protolytic cracking mechanism in order to understand the effect of pore structure of zeolites on their product composition and deactivation. The selectivities for $C_3$ and $C_3{^=}$ were high over the zeolites with medium pores due to additional cracking, while those for $C_4$ and $C_4{^=}$, the initial products, were high over the zeolites with large pores. MFI zeolite showed slow deactivation due to small carbon deposit, while FER zeolite with small pores deactivated rapidly with severe carbon deposit. The deactivation of BEA zeolite was slow even with a large amount of carbon deposit, but MOR zeolite showed a rapid deactivation even with a small amount of carbon deposit. The conversion measured along with the time on stream on these zeolite catalysts was simulated by a mechanism based on the simplified reaction path of n-octane cracking and the deactivation related to the pore blockage by carbon deposit.

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.109-115
• /
• 2008

It is very important to estimate the physical properties of survey area and delineate the geological basement in marine site survey for the design of offshore structures. For the purpose of providing high quality data by means of engineering site survey, it is necessary to apply several survey techniques and carry out the integrated interpretation to each other. In this study, we applied single channel seismic reflection method and OBC (Ocean Bottom Cable) type seismic refraction method at shallow marine. We used a dual boomer-single channel streamer as a source-receiver in seismic reflection survey and airgun source-the developed OBC type streamer in seismic refraction survey. We made 24 channels OBC type streamer which has 4m channel interval and each channel is composed of single hydrophone and preamplifier. We tested the field applicability of the proposed method and applied the typical seismic data processing methods to the obtained reflection data in order to enhance the data quality and image resolution. In order to estimate the geological velocity distribution from refraction data, seismic refraction tomography technique was applied. Therefore, we could successfully perform time-depth conversion using the velocity information as an integrated interpretation. The proposed method could provide reliable geologic information such as sediment layer thickness and 3D basement depth map.

• Elastomers and Composites
• /
• v.44 no.1
• /
• pp.55-62
• /
• 2009

In this study, investigation on the polymerization characteristics of isoprene through nitroxide mediated controlled/"living" radical polymerization techniques was attempted. In the presence of acetol, linear increase of isoprene conversion with time and low polydispersities of the resulting polymers ($M_w/M_n$ < 1.5) were observed, which suggest successful controlled/"living" radical polymerization of isoprene. The microstructure of the resulting polyisoprene was composed of $\sim$ 22% of 3, 4, $\sim$30% of 1, 4-cis and $\sim$ 48% of 1, 4-trans. The optimum polymerization temperature was 145 $^{circ}C$, below which no significant polymerization behavior was observed. Non-cyclic nitroxide, such as di-tert-butyl nitroxide (DTBN) could not mediate the polymerization, whereas cyclic nitroxides (2, 2, 6, 6-tetramethyl-1-peperidine 1-oxyl (TEMPO) and 4-oxo-2, 2, 6, 6-tetramethyl-1-peperidine 1-oxyl (oxoTEMPO)) were successfully employed for the polymerization. However, isoprene dimerization reaction through Diels-Alder process was also observed at the given polymerization condition, which afforded a significant amount of limonene. Isoprene thermal autoinitiation was also possible, which was, however, considered to be not significant under the given polymerization condition.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.7-16
• /
• 2007

In this paper, we introduce a new design environment for efficient multiprocessor system-on-chip design space exploration. The design environment takes a process network model as input system specification. The process network model has been widely used for modeling signal processing applications because of its excellent modeling power. However, it has limitation in predictability, which could cause severe problem for real time systems. This paper proposes a new approach that enables static analysis of a process network model by converting it to a hierarchical synchronous dataflow model. For efficient design space exploration in the early design step, mapping application to target architectures has been a crucial part for finding better solution. In this paper, we propose an efficient mapping algorithm. Our mapping algorithm supports both single bus architecture and multiple bus architecture. In the experiments, we show that the automatic conversion approach of the process network model for static analysis is performed successfully for several signal processing applications, and show the effectiveness of our mapping algorithm by comparing it with previous approaches.

• Clean Technology
• /
• v.20 no.2
• /
• pp.108-115
• /
• 2014

Various metal chlorides and acid catalysts in ionic liquid solvent were investigated to directly convert cellulose into 5-hydroxymethylfurfural (5-HMF). Metal chlorides containing Sn(II), Zn(II), Al(III), Fe(III), Cu(II), and Cr(III) were used and acidic ionic liquid immobilized on silica gel as an acid catalyst and commercial acid catalysts (sulfuric acid, chloric acid, Amberlyst-15,DOWEX50x8) were used for comparison studies. The acid strength and amount of acid catalysts were probed with Hammett indicator. The selectivity and yield of 5-HMF were determined with reaction temperature, reaction time and catalyst ratio. A catalyst containing $CrCl_3-6H_2O$ and $SiO_2-[ASBI]HSO_4$ showed the highest selectivity and it was found that this catalyst had higher activity than commercial solid acid catalysts such as Amberlyst-15 and DOWEX50x8. The selectivity of 5-HMF appeared to be mainly dependent on the acid strength and catalyst ratio, it was found that levulinic acid was produced from 5-HMF by rehydration.

• Journal of Radiation Protection and Research
• /
• v.28 no.1
• /
• pp.9-18
• /
• 2003

Rice plants at different seed-developing stages were exposed to HTO vapor in an exposure box for 1 h during daytime and nighttime to investigate the levels of tissue free water $^3H$ (TFWT) and organically bound $^3H$ (OBT) in different plant parts. In the daytime experiment, TFWT concentrations in leaves at the end of exposure $(h_0)$ were around 100% of the 1 hour mean HTO concentrations in air moisture whereas in the nighttime experiment, they were as low as $30{\sim}40%$ of the air concentration. TFWT concentrations in both experiments decreased very rapidly in the beginning but much mote slowly later and those at harvest were hundreds to hundred thousands times lower than those at $h_0$. OBT concentrations varied with time in different manners depending on plant parts and exposure times and differed between at $h_0$ and at harvest by factors of less than 10 on the whole. Even during nighttime exposures, OBT was produced at about a third the rate for daytime exposures. The degree of the conversion of airborne HTO into OBT in mature rice seeds, being several times higher in the daytime experiment than in the nighttime experiment, was highest after the exposure peformed at the most actively seed-developing stage for both experiments. It is estimated that OBT would contribute much more to the ingestion radiation dose than TFWT if rice plants are exposed to HTO vapor for the seed-developing period.

• Journal of Aquaculture
• /
• v.17 no.4
• /
• pp.235-239
• /
• 2004

Experiments were carried out to examine the effects of the different levels of oxygen, ammonia and hydrogen sulfide on survival, specific growth rate (SGR) and feed conversion ratio (FCR) of juvenile shrimp, Fenneropenaeus chinensis. Survival of the shrimp exposed to the hypoxia with $\leq$2.5 mg/L dissolved oxygen for 24 days were significantly affected. SGR and FCR of the shrimp exposed to$\leq$3.0 mg/L dissolved oxygen were significantly reduced than those of shrimp reared at 6.8 mg/L dissolved oxygen concentration. Survival of the shrimp exposed to $\geq$2.0 mg/L of ammonia levels for 24 days was significantly affected. Moreover, compared to the control group significant decrease of SGR and FCR of the shrimp has been observed with $\geq$1.0 mg/L and $\geq$0.5 mg/L of ammonia concentrations. In case of hydrogen sulfide, $\geq$0.5 mg/L was the critical level showed its significant negative effect on survival rate of shrimp exposed for 24 days. While, the group exposed with $\geq$0.07 mg/L and $\geq$0.05 mg/L hydrogen sulfide levels had a lower SGR and FCR values than did the control group in the same stipulated time of exposure.

• Polymer(Korea)
• /
• v.32 no.3
• /
• pp.276-283
• /
• 2008

Kind of monomer(MMA, EA, BA, St)and the monomer ratio(80/20 to 20/80) where changed in the preparation of the core shell binder, and property was improved the plasma processing. Each material changed by plasma treatment time($1{\sim}10\;s$) to change to measure the tensile strength, contact angle and adhesion peel strength for the core shell binder optimal conditions for handling the output of the surface treatment. The type of polymerization and composition of the binder is a regardless initiator of APS, the reaction temperature of $85^{\circ}C$ to 0.3 wt% of the surfactant used to indicate when the conversion rate was the highest, core shell composite particle binder got two glass temperature curves. Core shell binder after the plasma processing contact angle change is the PEA/PSt 38 percent of cases within five seconds to indicate slight decrease was a decline rapidly if not handled $0^{\circ}$ to reach. Tensile strength PSt/PMMA varies $46.71{\sim}46.27\;kg_f$/2.5 cm and adhesion strength PEA/PMMA varies $7.89{\sim}14.44\;kg_f$/2.5 cm increases. Overall, adhesion strength of core shell composite particle is in the order of order PEA>PBA>PSt for shell monomer MMA.