• Korean Journal of Materials Research
• /
• v.21 no.12
• /
• pp.666-672
• /
• 2011

The a-Si:H/c-Si hetero-junction (HJ) solar cells have a variety of advantages in efficiency and fabrication processes. It has already demonstrated about 23% in R&D scale and more than 20% in commercial production. In order to further reduce the fabrication cost of HJ solar cells, fabrication processes should be simplified more than conventional methods which accompany separate processes of front and rear sides of the cells. In this study, we propose a simultaneous deposition of intrinsic thin a-Si:H layers on both sides of a wafer by dual hot wire CVD (HWVCD). In this system, wafers are located between tantalum wires, and a-Si:H layers are simultaneously deposited on both sides of the wafer. By using this scheme, we can reduce the process steps and time and improve the efficiency of HJ solar cells by removing surface contamination of the wafers. We achieved about 16% efficiency in HJ solar cells incorporating intrinsic a-Si:H buffers by dual HWCVD and p/n layers by PECVD.

• Food Science of Animal Resources
• /
• v.39 no.1
• /
• pp.1-12
• /
• 2019

The objective of this study was to establish an optimized 1D $^1H$ quantitative nuclear magnetic resonance (qNMR) analytical method for analyzing polar metabolites in meat. Three extraction solutions [0.6 M perchloric acid, 10 mM phosphate buffer, water/methanol (1:1)], three reconstitution buffers [20 mM 3-morpholinopropane-1-sulfonic acid, 2-[4-(2-hydroxyethyl)piperazin-1-yl]ethanesulfonic acid, phosphate buffer], and two pulse programs (zg30, noesypr1d) were evaluated. Extraction with 0.6 M perchloric acid and 20 mM phosphate resulted in a stable baseline and no additional overlap for quantifying polar metabolites in chicken breast. In qNMR analysis, zg30 pulse program (without water-suppression) showed smaller relative standard deviation (RSD) and faster running time than noesypr1d (water-suppression). High-performance liquid chromatography was compared with qNMR analyses to validate accuracy. The zg30 pulse program showed good accuracy and lower RSD. The optimized qNMR method was able to apply for beef and pork samples. Thus, an optimized 1D $^1H$ qNMR method for meat metabolomics was established.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.571-573
• /
• 2014

In today's technology streaming service's QoS technologiey is an issue. On quality video streaming service there are some technical issues exist, such as buffering. This submission is "Adaptive dual-streaming system design" which is for the integrity of the data streaming that is sent to TCP and UDP for faster transmission of data to the stream. This system provides real-time incoming video encoding in bitrate of h.264-based H through a process based on the video footage of several server and client-to-TCP and UDP via Adaptive providing streaming services in a network environment. This is an unspecified number of buffers in a network environment and continued through the minimization of various streaming for playback of videos and multimedia will be utilized in the field.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.3
• /
• pp.83-95
• /
• 2022

This study aims to present primary data for habitat restoration and artificial breeding conditions of L. unmunsana by identifying the habitat conditions and the larvae's food sources. In order to investigate the habitat characteristics of the adult L. unmunsana and land snails, which are the primary food sources for the larvae, field surveys were conducted on a total of 10 habitats in south-central parts of Korea including Sanseongcheon, Jeonju. The results revealed that the L. unmunsana habitat in the Sanseongcheon area had a broadleaf forest with a multi-layered vegetation structure, adjacent water features, and the north/northeast/northwest slopes with little effect of artificial lighting. The adult L. unmunsana in the Sanseongcheon area appeared from the end of May to the end of June, and was especially intensively observed around the middle of June. The most active time was from 23:30 to 00:30 with a temperature range of 19~22℃ and higher than 80% humidity. The peak count of the observed adults L. unmunsana was a total of 774 on June 11, 2021. In the case of land snails, 11 families and 23 species were observed in 10 habitats of L. unmunsana, and Euphaedusa fusaniana was the most extensive and the most observed in the five survey areas. The land snails of L. unmunsana habitats are mostly found under the organic layers of leaves and a fallen tree branch in broadleaf forests, where a thick organic material layer buffers temperature changes and provides high humidity for various snails. These habitat conditions are suitable for the larva of L. unmunsana and land snails to inhabit, feed, hide and hibernate.

• International Journal of Computer Science & Network Security
• /
• v.23 no.1
• /
• pp.153-163
• /
• 2023

This study is situated in the context of intelligent transport systems, where in-vehicle devices assist drivers to avoid accidents and therefore improve road safety. The vehicles present in a given area form an ad' hoc network of vehicles called vehicular ad' hoc network. In this type of network, the nodes are mobile vehicles and the messages exchanged are messages to warn about obstacles that may hinder the correct driving. Node mobilities make it impossible for inter-node communication to be end-to-end. Recognizing this characteristic has led to delay-tolerant vehicular networks. Embedded devices have small buffers (memory) to hold messages that a node needs to transmit when no other node is within its visibility range for transmission. The performance of a vehicular delay-tolerant network is closely tied to the successful management of the nodes' transit buffer. In this paper, we propose a message transit buffer management model for nodes in vehicular delay tolerant networks. This model consists in setting up, on the one hand, a policy of dropping messages from the buffer when the buffer is full and must receive a new message. This drop policy is based on the concept of intermediate node to destination, queues and priority class of service. It is also based on the properties of the message (size, weight, number of hops, number of replications, remaining time-to-live, etc.). On the other hand, the model defines the policy for selecting the message to be transmitted. The proposed model was evaluated with the ONE opportunistic network simulator based on a 4000m x 4000m area of downtown Bouaké in Côte d'Ivoire. The map data were imported using the Open Street Map tool. The results obtained show that our model improves the delivery ratio of security alert messages, reduces their delivery delay and network overload compared to the existing model. This improvement in communication within a network of vehicles can contribute to the improvement of road safety.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.23 no.3
• /
• pp.135-141
• /
• 2023

Background: The limited studies on the effect of buffering on the clinical efficacy of articaine have reported controversial results. The purpose of this study was to clinically compare the pain of injection, anesthetic success, onset, and duration of pulpal anesthesia of buffered 4% articaine with epinephrine 1:100000 versus a non-buffered 4% articaine with epinephrine 1:100000 formulation for buccal infiltration of the mandibular first molar. Methods: Sixty-three volunteers were enrolled in the study. All volunteers received two injections consisting of a single mandibular first molar buccal infiltration with 1.8 ml of 4% articaine with epinephrine 1:100000 and 1.8 ml of 4% articaine with epinephrine 1:100000 buffered with 8.4% sodium bicarbonate. The infiltrations were applied in two separate appointments spaced at least one week apart. After injection of the anesthetic solution at the examined site, the first molar was pulp-tested every 2 min for the next 60 min. Results: Successful pulpal anesthesia was recorded in 69.8% of cases using non-buffered articaine solution and 76.2% of cases using buffered articaine solution, with no significant difference between the formulations (P = 0.219). The mean time of anesthesia onset for the volunteers with successful anesthetic outcome in both formulations (n = 43) was 6.6 ± 1.6 min for the non-buffered articaine solution and 4.5 ± 1.6 min for the buffered solution, which differed significantly (P = 0.001). In the same volunteers, the mean duration of pulpal anesthesia was 28.4 ± 7.1 min for non-buffered articaine solution and 30.2 ± 8.5 min for buffered articaine solution, with no significant difference between the formulations (P = 0.231). Considering the pain of injection, regardless of the anesthetic success, the mean values of VAS were 11.3 ± 8.2 mm for the non-buffered articaine solution and 7.8 ±6.5 mm for the buffered articaine solution, which differed significantly (P = 0.001 < 0.05). Conclusion: According to the present study, 4% articaine with epinephrine can benefit from buffering and provide better anesthetic behavior, with improved onset and less pain during injection.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.6
• /
• pp.1-12
• /
• 2024

Deep learning with faster and more accurate results requires large amounts of storage space and large computations. Accordingly, many studies are using hardware accelerators for quick and accurate calculations. However, the performance bottleneck is due to data movement between the hardware accelerators and the CPU. In this paper, we propose a data prefetch strategy that can efficiently reduce such operational bottlenecks. The core idea of the data prefetch strategy is to predict the data needed for the next task and upload it to local memory while the hardware accelerator (Matrix Multiplication Unit, MMU) performs a task. This strategy can be enhanced by using a dual buffer to perform read and write operations simultaneously. This reduces latency and execution time of data transfer. Through simulations, we demonstrate a 24% improvement in the performance of hardware accelerators by maximizing parallel processing with dual buffers and bottlenecks between memories with data prefetch.

• FOCUS: LIFE SCIENCE
• /
• no.1
• /
• pp.1.1-1.4
• /
• 2024

This article provides comprehensive guidance on the maintenance, cleaning, regeneration, and storage of silica-based HPLC (High-Performance Liquid Chromatography) columns. The general considerations emphasize the importance of using in-line filters and guard cartridges to protect columns from blockage and irreversible sample adsorption. While these measures help, contamination by strongly adsorbed sample components can still occur over time, leading to an increase in back pressure, loss of efficiency, and other issues. To maximize column lifetime, especially with UHPLC (Ultra-High Performance Liquid Chromatography) columns, it is advisable to use ultra-pure solvents, freshly prepared aqueous mobile phases, and to filter all samples, standards, and mobile phases. Additionally, an in-line filter system and sample clean-up on dirty samples are recommended. However, in cases of irreversible compound adsorption or column voiding, regeneration may not be possible. The document also provides specific recommendations for column cleaning procedures, including the flushing procedures for various types of columns such as reversed phase, unbonded silica, bonded normal phase, anion exchange, cation exchange, and size exclusion columns for proteins. The flushing procedures involve using specific solvents in a series to clean and regenerate the columns. It is emphasized that the flow rate during flushing should not exceed the specified limit for the particular column, and the last solvent used should be compatible with the mobile phase. Furthermore, the article outlines the storage conditions for silica based HPLC columns, highlighting the impact of storage conditions on the column's lifetime. It is recommended to flush all buffers, salts, and ion-pairing reagents from the column before storage. The storage solvent should ideally match the one used in the initial column test chromatogram provided by the manufacturer, and column end plugs should be fitted to prevent solvent evaporation and drying out of the packing bed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.148-156
• /
• 2013

This paper suggests a multi-level and multi-output SMPS based on a shared digital logic controller through independently operating in each dedicated time periods. Although the shared architecture can be devised with small area and high efficiency, it has critical drawbacks that real-time control of each DPWM generators are impossible and its output voltage can be unstable. To solve these problems, a real-time current compensation scheme is proposed as a solution. A current consumption of the core block and entire block with four driver buffers was simulated about 4.9mA and 30mA at 10MHz switching frequency and 100MHz core operating frequency. Output voltage ripple was 11 mV at 3.3V output voltage. Over/undershoot voltage was 10mV/19.6mV at 3.3V output voltage. The noise performance was simulated at 800mA and 100KHz load regulation. Core circuit can be implemented small size in $700{\mu}m{\times}800{\mu}m$ area. For the verification of proposed circuit, the simulations were carried out with Dong-bu Hitek BCD $0.35{\mu}m$ technology.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.205-216
• /
• 2010

In this paper, a method of MPEG-2 Transport Stream (TS) multiplexing for Ultra HDTV (UHDTV) and its design and implementation as a SW tool is described. In practice, UHD video may be divided into several HD videos and each video is encoded in parallel. Therefore, it is necessary to synchronize and multiplex multiple bitstreams encoding each HD video for transmitting and storing UHD video. In this paper, it is assumed that 4 HD videos partitioning a UHD spatially are encoded as H.264/AVC and two 5.0 channel audios are encoded by AC-3. Therefore, 4 H.264/AVC elementary streams (ESs) and 2 AC-3 ESs is mainly considered in the TS multiplexing of UHD. For the carriage of H.264/AVC and AC-3 over MPEG-2 TS, PES packetization and TS multiplexing are designed and implemented based on the extended specification of the MPEG-2 Systems and ATSC (Digital audio compressed standard), respectively. The implemented UHD TS multiplexing tool emulates real time HW operation in the time unit corresponding to the duration of one TS packet transmission in a given TS rate. In particular, in order to satisfy the timing model, the buffers defined in the TS System Target Decoder (T-STD) are monitored and their statuses are considered in the scheduling of TS multiplexing. For UHD multiplexing, two kinds of multiplexing structures, which are UHD re-multiplexing and UHD program multiplexing, are implemented and their strength and weakness are investigated. The developed UHD TS multiplexing tool is tested and verified in terms of the syntax and semantics conformance and functionalities by using a commercial analyzer and real-time presentation tools.