• 제어로봇시스템학회논문지
• /
• 제18권10호
• /
• pp.921-927
• /
• 2012

In this paper we deal with a hydraulic tilting actuator to make a diagnosis of load characteristic acting on the tilting actuator of the tilting train. Tilting actuator in the tilting train plays a role of making tilt of the train when the train runs a curve section to make the train run without deceleration. However in the process of tilt the tilting actuator is affected by the load acting on the actuator, which has a possibility to make bogie vibration. In order to figure out the effect of the load on the tilting actuator a hydraulic tilting devices that are capable of tilting the train is proposed. The proposed devices are installed in the front bogie and in the rear bogie to make tilting of the train. The devices are consist of sensors that measure the load capacity of the actuator and displacement of the hydraulic cylinder stroke, control blocks to make synchronization of the two actuators, user interface block to monitor the status of the actuators. The effectiveness of the proposed hydraulic tilting actuators is presented by the experimental evaluation using actual tilting train.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.353-355
• /
• 2002

This paper describes the pantograph design result for tilting train at conventional railway. EMU(Electrical Multiple Unit) Tilting Train is important tilting pantograph. Tilting train pantograh should be operated to commercial service speed 180Km/h of 200Km/h at KNR upgrade railroad. This paper is write tilting train pantograph control system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.232-234
• /
• 2004

Tilting train has been developed to increase the operational speed of the trains on conventional lines which have many curves. This train are tilted at curves to compensate for unbalanced carbody centrifugal acceleration to a greater extent than compensation produced by the track cant, so that passengers do not feel centrifugal acceleration and thus trains can run at higher speed at curves. This paper developed tilting control simulator to evaluate tilting control performance of TTX(tilting train express) with maximum operation speed 180 km/h.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1754-1756
• /
• 2003

This paper describes the pantograph design result for tilting train at conventional railway. EMU(Electrical Multiple Unit) Tilting Train is important tilting pantograph. Tilting train pantograh should be operated to commercial service speed 180Km/h of 200Km/h at KNR upgrade railroad. This paper is written about train pantograph control system

• 제어로봇시스템학회논문지
• /
• 제5권4호
• /
• pp.496-503
• /
• 1999

In this paper, the improvement of cap tilting system in heavy truck and the development of program for automatic design are discussed. Cab tilting system takes some important roles in heavy truck, absorbing discomfort vibration from load, increasing repair efficiency and making sure of safety. Common manual cab tilting system cannot be easily tilt up in sloped road, giving difficulty to driver as cal tilting up/down. So recently hydraulic cab tilting system is in wide use. But some problem such as tilting up/down speed is not constant and sudden swing of cab has brought discredit from user. Therefore, this paper presents advanced cab tilting system which prevents sudden swing of cab and development of program for selecting design parameters automatically.

• 한국소음진동공학회논문집
• /
• 제21권12호
• /
• pp.1152-1158
• /
• 2011

In this paper a configuration of the load evaluation device for the tilting actuator using hydraulic power is presented, which makes it possible to measure the force action on the tilting actuator. It is possible to measure only current using the conventional electro-mechanical actuator when the bogie is in the process of the tilting. This makes impossible to measure the force acting on the tilting actuator. In order to overcome this problem a kinetic mechanism test system using hydraulic cylinder is proposed. The system are consisted of hydraulic cylinder for the tilting actuation, control system to control hydraulic power, sensors to measure for force and displacement and monitoring system for the user interface.

• 한국정밀공학회지
• /
• 제18권3호
• /
• pp.90-98
• /
• 2001

In this paper, the development of exclusive control valve for improving the performance of truck cab tilting system is discussed. Cab tilting system is implemented to the heavy truck for the convenience of driver. However when tilting up or down, sudden swing of cab has brought discredit on user. To improve this phenomena it is inevitable to use counter balance valve. But because of high pressure and low flow characteristic, general counter balance valve is unsuitable to cab tilting system. Therefore, this paper presents the developments of exclusive return pressure control valve which prevents sudden swing of cab and verify the validity of design through the computer simulation.

• 제어로봇시스템학회논문지
• /
• 제20권1호
• /
• pp.87-93
• /
• 2014

Conventional two-wheeled balancing robots are limited in terms of turning speed because they lack the lateral motion to compensate for the centrifugal force needed to stop rollover. In order to improve lateral stability, this paper suggests a two-wheeled balancing mobile platform equipped with a tilting mechanism to generate roll motions. In terms of static force analysis, it is shown that the two-body sliding type tilting method is more suitable for small-size mobile robots than the single-body type. For the mathematical modeling, the tilting-balancing platform is assumed as a 3D inverted pendulum and the four-degrees-of-freedom equation of motion is derived. In the velocity/posture control loop, the desired tilting angle is naturally determined according to the changes of forward velocity and steering yaw rate. The efficiency of the developed tilting type balancing mobile platform is validated through experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1158-1161
• /
• 2004

This paper describes the construction of a half sphere screen driving tilting simulator that can perform six degree-of-freedom (DOF) motions simulator to a tilting train. The mathematical equations of Tilting Train dynamics are first derived from the 6-DOF bicycle model and incorporated with the bogie, carbody, and suspension subsystems. The equations of motion are then programmed by visual C++ code. To achieve the simulator functions, a motion platform that is constructed by six electric-driven actuators is designed, and its kinetics/inverse kinetics analysis is also conducted. Driver operation signals such as carbady angle, accelerator, and tilting positions are measured to trigger the Tilting dynamics calculation and further actuate the cylinders by the motion platform control program. In addition, a digital PID controller is added to achieve the stable and accurate displacements of the motion platform. The experiments prove that the designed simulator is adequate in performing some special rail road driving situations discussed in this paper.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.401-405
• /
• 2003

This paper presents a design strategy of the dynamic simulator for the Korean tilting train. The tilting train simulator will generate the tilting motion to the lateral acceleration date obtained from the train dynamic analysis. The simulator will be composed of five components: (1) GUI control panel, (2) train dynamic analysis part, (3) tilting control part, (4) motion base with 6 electrical-motor-driven actuators and (5) visualization system. Using the simulator, we will verify the dynamic behaviors of the tilting train, interfaces among subparts and ride comfort before manufacturing of the tilting train.