• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.53-54
• /
• 2008

We have studied electro-optic characteristics as a function of passivation thickness$(t_p)$ in the fringe-field swiching (FFS) mode using the LC with positive dielectric anisotropy. When $t_p$ is increased from $0.29{\mu}m$ to $3.0{\mu}m$, a maximum transmittance is slightly increased to $2{\mu}m$. However, operating voltage is continuously increased up to above 11v. We found that the tilt angle is decreased between the edge of pixel electrode and the center of each pixel electrode. In the FFS mode using the liquid crystal with positive dielectric anisotropy, transmittance is affected by the tilt angle. When tilt angle is increased, transmittance become decrease. Therefore, in the FFS device, a low tilt angle is favored for high transmittance. It is demonstrated that the suitable passivation thickness make a tilt angle decreased.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.1
• /
• pp.81-88
• /
• 2019

Purpose : The purpose of this study was to examine if there is any correlation between pelvic tilt angle and trunk motion and trunk extensor during trunk forward flexion and to measure trunk motion, onset time of trunk motion, and onset time of trunk extensor activation. Methods : The subjects of this study were 42 healthy adults. The subjects had no back pain due to neurological disease and no experience of back surgery. After pelvic tilt angle was measured, each trunk forward flexion was performed three times. Trunk motion and onset time of trunk motion were measured using Myomotion. Four sensors were used, with one located at the upper thoracic (below $C_7$), the lower thoracic ($T_{12}-L_1$), the sacrum ($S_1$), and at the center of the anterior femur. Onset time of trunk extensors (spinalis, longissimus, gluteus medius, gluteus maximus, biceps femoris, and gastrocnemius) activation was measured using a wireless surface EMG. The EMG amplitude was normalized by using the reference voluntary contraction (RVC). The statistical significance of the results were evaluated using Pearson's correlation test. Results : The correlation between pelvic tilt angle and lumbar motion, onset time of pelvis motion, and onset time of gluteus medius activation was statistically significant in a positive direction (p<.05). The correlation between pelvic tilt angle with pelvis motion, onset time of lumbar motion, and onset time of longissimus activation showed a statistically significant negative correlation (p<.05). Conclusion : The study results provide a significant contribution to our understanding of the lumbar load at the initial stage of trunk flexion. Therefore, it may be possible to provide basic data for evaluation and treatment, such as orthodontic treatment for alignment of the spine and back pain. In addition, it is necessary to focus on normal exercise pattern reeducation as well as pelvic correction during exercise in daily life or in industrial fields.

• Korean Journal of Remote Sensing
• /
• v.18 no.2
• /
• pp.91-96
• /
• 2002

The performance characteristics of a satellite imager using a Time Delay and Integration(TDI) Charge Coupled Device (CCD) with fixed integration time is investigated for the variation of satellite altitude and tilt angle. In consequence of the investigation TDI synchronization using tilt imaging is proposed as a solution to compensate geometric performance degradation due to altitude decrease. The tilt angle optimized for the TDI synchronization at decreased altitude is presented. This result can be used for a TDI CCD imager with variable integration time in a certain range as well.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.414-414
• /
• 2007

In this study, Liquid Crystal (LC) alignment and tilt angle generation in Nematic Liquid Crystal (NLC) with negative dielectric anisotropy on the homeotropic PI surface with new ion beam exposure are reported. Also. high density of ion beam energy (DuoPIGatron type Ar ion gun) is used in this study. The tilt angle of NLC on the homeotropic Polyimide (PI) surface for all incident angles is measured about 38 degree and this has a stabilization trend. And the good LC alignment of NLC on the PI surface with ion beam exposure of $45^{\circ}$ incident angle was observed. Also the tilt angle of NLC on the homeotropic PI surface with ion beam exposure of $45^{\circ}$ had a tendency to decrease as ion beam energy density increase. The tilt angle could be controlled from verticality to horizontality. Also, the LC aligning capabilities of NLC on the homeotropic PI surface according to ion beam energy has the goodness in case of more than 1500 eV. Finally. the superior LC alignment thermal stability on the homeotropic PI surface with ion beam exposure can be achieved. For OCB(Optically Compensated Bend) mode driving, we can need pretilt angles control for fast response time. In this study, We success pretilt angles control. Consequently, this result can be applied for OCB mode.

• PNF and Movement
• /
• v.18 no.3
• /
• pp.351-363
• /
• 2020

Purpose: The purpose of this study was to investigate the effects of Pilates exercise on the back pain index, pelvic tilt angle, and physical fitness of pregnant women with low back pain. Methods: All study participants, all of whom had pregnancy-induced back pain, were randomly assigned to either a Pilates exercise group (PG, n = 8) or control group (CG, n = 7). The PG performed a Pilates exercise for 50 minutes three times a week for eight weeks. The back pain scale and pelvic tilt angle were measured using a visual analogue scale and angulometer, respectively. Cardiopulmonary endurance, flexibility, and grip strength were measured to examine the physical fitness. The variables were analyzed using two-way repeated-measures ANOVA with the Holm-Sidak post hoc procedure. Results: Back pain in the PG significantly decreased from 4.69 ± 1.28 to 1.06 ± 0.94, whereas the CG showed significantly increased back pain from 2.63 ± 2.20 to 4.71 ± 2.56. The left pelvic angle in the PG showed a significant decrease from 13.94 ± 3.70° to 12.29 ± 2.95°, while the CG showed a non-significant difference from 13.07 ± 4.42° to 17.37 ± 3.13°. The right pelvic angle in the PG showed a significant decrease from 13.50 ± 4.47° to 10.34 ± 3.66°, while a non-significant difference in the CG from 44 ± 4.98° to 15.30 ± 3.61° was found. These results showed that the regular participation in Pilates exercise was effective in reducing the pelvic tilt angle. In terms of physical fitness, the PG showed a significant increase in cardiopulmonary endurance, flexibility, and grip strength. However, the CG showed any significance increase in those variables. Conclusion: Eight weeks of Pilates exercise was associated with a decrease in lower back pain, a maintained or reduced pelvic tilt angle, and increased cardiopulmonary endurance, grip strength, and flexibility in pregnant woman with lumbar pain.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.5
• /
• pp.187-192
• /
• 2011

Tilt angle of r-plane wafer is a one of the important factors related with the quality of the GaN epi, so the fine control of the tilt angle is important for the growing of high quality non-polar a-GaN epi. We prepared the R-plane sapphire wafers with slight tilt angles for nonpolar a-plane GaN. The target tilt angles of ${\alpha}$ and ${\beta}$ were 0, -0.1, -0.15, -0.2, -0.4, $-0.6^{\circ}$ and -0.1, 0, $0.1^{\circ}$, respectively. The tilt angles of sliced R-plane sapphire wafers were measured by x-ray and the statistical evaluation of reliability of tilt angles of wafers were performed. The tolerance of the tilt angle was ${\pm}0.03^{\circ}$. R-plane sapphire wafers have relatively large distributions of BOW and TTV data than c-plane sapphire wafers due to the large anisotropy of R-plane. As the tilt angle ${\alpha}$ was increased from -0.1 to $-0.6^{\circ}$, the step widths and heights were decreased from 156 nm to 26 nm and 0.4 nm to 0.2 nm, respectively. The growth and qualities of GaN epi seems to be largely affected by the change of step structure of R-plane sapphire wafers with tilt angle.

• Fire Science and Engineering
• /
• v.27 no.5
• /
• pp.75-79
• /
• 2013

Application of the left lateral tilt position has been recommended during cardiopulmonary resuscitation (CPR) of pregnant patients. However, the left lateral tilt could displace the left ventricle (LV) besides the gravid uterus and may compromise the cardiac pump mechanism of CPR. Thus, we investigated the effect of left lateral tilt on the spatial relationship between the anterior-posterior axis (AP axis), which represents the direction of sternal displacement during CPR, and the LV. We retrospectively reviewed the medical records and multidetector computed tomography (MDCT) scans of 90 patients who underwent virtual gastroscopy using MDCT. Virtual gastroscopy was performed with the patient both in the left lateral tilt position and in the supine position. On an axial image showing the maximal area of the LV, the angle between the AP axis and the LV axis ($Angle_{AP-LV}$), the shortest distance between the AP axis and the mid-point of LV cavity ($D_{AP-MidLV}$) and the shortest distance between the AP axis and the LV apex ($D_{AP-Apex}$) were measured. In the supine scans, the LV was situated on the left side of the AP axis in 87 patients (96.7%). On the left lateral tilt scans, the mean tilt angle was $43.4{\pm}11.0^{\circ}$. $D_{AP-MidLV}$ and $D_{AP-Apex}$ were significantly longer in the left lateral tilt position (p<0.001), but $Angle_{AP-LV}$ was comparable between the positions. This study indicates that the left lateral tilt position may compromise the cardiac pump mechanism of chest compression in pregnant cardiac arrest patients.

• Physical Therapy Korea
• /
• v.26 no.4
• /
• pp.29-34
• /
• 2019

Background: The serratus anterior is one of the most important muscle for maintaining good scapular alignment in the shoulder joint. The pectoralis major and upper trapezius may also compensate for weak serratus anterior muscles. The push-up plus exercise has been identified as the optimal exercise for maximum activation of the serratus anterior. Objects: The purpose of this study was to examine differences in surface electromyography (EMG) activity of upper trapezius, pectoralis major, and serratus anterior muscles during push-up plus exercises on variously angled surfaces in subjects with winged scapula. Methods: Sixteen subjects with winged scapula (male=5, female=11) volunteered for this study. The subjects performed push-up plus exercise on four different tilt angles, namely $0^{\circ}$, $30^{\circ}$, $60^{\circ}$, and $90^{\circ}$. EMG activities in the serratus anterior, upper trapezius, and pectoralis major muscles during performance of push-up plus exercise were measured in all subjects. Data were processed from repeated measures one-way analysis of variance. Results: There was significant difference in the muscle activity of the serratus anterior on the different surface angles (p<.05). The results of the post-hoc analysis showed significantly greater serratus anterior muscle activity on a surface at a $0^{\circ}$ angle than at others tilt angles (p<.05). There was also significant difference in the ratio of serratus anterior to upper trapezius and serratus anterior to pectoralis major across the four surfaces (p<.05), and post-hoc analysis showed significantly greater values on the $0^{\circ}$ surface than on other tilts (p<.05). Conclusion: This study found that performing push-up plus exercises on a flat surface with $0^{\circ}$ and $30^{\circ}$ tilt angle achieves high activation of the serratus anterior muscle for selective strengthening. It can also take into account the sequential application, which is first performed at a $30^{\circ}$ and at a $0^{\circ}$ tilt angle for and effective but not excessive muscle activation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.134-138
• /
• 2021

Various types of precision plastic thin films are used widely in high-performance displays, such as smartphones. For plastic thin-films manufactured by the Roll-to-Roll process, the film thickness must be measured and managed while moving. In the Roll-to-Roll process, wrinkles are generated when tension is applied to the film, which causes an inclination on the optical axis of the thickness gauge, resulting in a loss of accuracy. Therefore, this study attempted to develop an optical interference tomography measurement system. In this study, the tilt angle of the film was measured to correct the measurement value error in the thickness gauge caused by the tilt of the film. The system was constructed so that the laser was irradiated on the tilted film, and the laser reflected from the film was formed on the PSD. The relationship between the tilt angle of the film and the output value of the PSD was obtained experimentally. Using this, a device to measure the tilt angle of the film was constructed, and angle measurements were taken at a speed of 250,000Hz.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.642-647
• /
• 2001

This study represents numerical analysis on the thermal and fluid flow of the air layer in a solar collector. The boundary conditions was assumed that the top and bottom wall of the air layer have a heating and cooling surface. respectively. and this calculation model have a solid body with a cooling temperature of $20^{\circ}C$. As the results of simulations. the magnitudes of the velocity vectors and isotherms are increased proportionally to the tilt angles. As the tilt angle is increased. the mean Nusselt numbers are increased and the maximum value of the mean Nusselt number was appeared at tilt angle ${\theta}=75^{\circ}$.