• Archives of Orthopedic and Sports Physical Therapy
• /
• v.14 no.2
• /
• pp.127-133
• /
• 2018

Purpose: This study investigated the effects of changing the tilt angle of the exercise bed on physiological characteristics of trapezius, multifidus, and hamstring muscle function. Methods: Twenty elderly who complains of back and lumbar pain or discomfort participated in this study (average age: $64.70{\pm}4.55$ years). The physiological characteristics, including muscle tone (F), dynamic stiffness (S), and elasticity (D) of trapezius, multifidus, and hamstring muscles were measured by a Myoton device at three tilt angles (0, 15, and 30 degrees) during exercise. Results: The muscle tone, dynamic stiffness, and elasticity of the right trapezius and left hamstring muscle showed significant differences (p<0.05) according to exercise bed tilt angle, while the other muscles showed no significant differences. Conclusions: Our results demonstrate that physiological characteristics of the upper and lower extremity muscles are affected ipsilaterally, according to the tilt angles of the exercise bed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1137-1141
• /
• 2004

In this paper, we have improved a novel ECB mode using bend structure with high tilt angle in the unique condition by Hot plate equipment. The new control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by Hot plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. We suggest that the development of the novel ECB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of fast response time and high contrast ratio.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.672-675
• /
• 2007

Experimental data are presented which describe heat losses of cavity type receiver in wind tunnel. Experiments are conducted at various conditions such as the heater temperature in cavity changes from 300, 400, and 500 oC, wind speed in tunnel from 2 to 8 m/s, and four different tilt angle of 30, 50, 70, 90o. The power consumption including temperature, voltage and current for each experimental conditions are measured and stored in data logger at everyone second interval. The experimental results show that heat losses increase with increasing wind speed and with tilt angle. However, heat losses for the tilt angle of 70 and 90o is almost same at each heater temperature. In addition, the effects of natural convection in combined convection heat losses vary in according to the tilt angle.

• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.2
• /
• pp.190-198
• /
• 2014

The pyramidal reaction wheel arrangement is one of the configurations that can be used in attitude control simulators for evaluation of attitude control performance in satellites. In this arrangement, the wheels are oriented in a pyramidal configuration with a tilt angle. In this paper, a study of pyramidal reaction wheel arrangement is carried out in order to find the optimum tilt angle that minimizes total power consumption of the system. The attitude control system is analyzed and the pyramidal configuration is implemented in numerical simulation. Optimization is carried out by using an iterative process and the optimum tilt angle that provides minimum system power consumption is obtained. Simulation results show that the system requires the least power by using optimum tilt angle in reaction wheels arrangement.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1485-1490
• /
• 2003

This paper is the analysis of thermal and fluid in solar concentration absorber with various tilt angle and opening ratio of absorber entrance. The purpose of this study is to develop optimum solar concentration absorber, and the parameters for the study are the opening ratio of absorber entrance and the tilt angle. The aspect ratio of absorber was fixed at 0.64, and opening ratio was changed from 0.1 to 1.0. The finite volume method with SIMPLE computational algorithm are used and analyzed the heat transfer in absorber inside walls.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.11
• /
• pp.966-972
• /
• 2013

Measurement or estimation of tilt angle is necessary for balancing robot such as Segway which is considered as a next generation transportation vehicle. However, it requires high-cost accurate sensors to hold balancing during stationary and moving situations. In this paper, a tilt angle estimation of a plane rotating in a vertical plane using low-cost sensors. Estimation using a set of 2-axis orthogonal accelerometers along with an inaccurate rate gyro has been considered. Feasibility and performance of the proposed technique has been verified through some experimental results.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.5
• /
• pp.522-529
• /
• 2022

In this paper, an experimental study on the control of the plume deflection panel(PDP) with a support jack of the ground launching platform using a tilt angle sensor is described. To overcome the disadvantages of the existing PDP control without a support jack using a limit sensor, the control algorithm using a tilt angle sensor and the ferroelectric RAM in the Launcher Control Unit for recognizing the contact with the ground in an abnormal operation is proposed to control the PDP in various operation environments. Finally, the proposed algorithm can be well applied for not only heavy-load launching platforms but also any other similar systems.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05d
• /
• pp.53-56
• /
• 2003

Blending effects for generating a pretilt angle in nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) of homeotropic and homogeneous alignment surface were studied. Also, we investigated the EO performances for the advanced VA-$\pi$ cell using this homeotropic blended PI surface. A many decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with side chain type was measured, and the tilt angle decreased as blended ratio and rubbing strength increase. The blended effects for generating a pretilt angle were clearly observed, and the many decrease of tilt angle can be achieved by using the blended PI surface. The electro-optical (EO) characteristics using the advanced VA-$\pi$ cell using the homeotropic blended PI surface than that of conventional VA cell can be improved. We suggest that the developed advanced VA-$\pi$ cell on a homeotropic blended PI surface is a promising technique for the achievement of a fast response time, and a high contrast ratio.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.9
• /
• pp.826-832
• /
• 2003

Blending effects for generating a pretilt angle in nematic liquid crystal (NLC) with negative dielectric anisotropy on the blended polyimide (PI) of homeotropic and homogeneous alignment surface were studied. Also, we investigated the EO performances for the advanced VA- $\pi$ cell using this homeotropic blended PI surface. A many decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with side chain type was measured, and the tilt angle decreased as blended ratio and rubbing strength increase. However, a small decrease of tilt angle on the polymer surface to blend homeotropic PI and homogeneous PI with main chain type was measured. The blended effects for generating a pretilt angle were clearly observed, and the many decrease of tilt angle can be achieved by using the blended PI surface. The electro-optical (EO) characteristics using the advanced VA- $\pi$ cell using the homeotropic blended PI surface than that of conventional VA cell can be improved. We suggest that the developed advanced VA-$\pi$ cell on a homeotropic blended PI surface is a promising technique for the achievement of a fast response time, and a high contrast ratio.

• Physical Therapy Korea
• /
• v.24 no.3
• /
• pp.30-39
• /
• 2017

Background: Scapular posterior tilt (SPT) is important in the prevention of abnormal scapular movement and pain during elevation of the arm. However, previous studies have overlooked increased upper trapezius (UT) muscle activity interrupting the normal force couple of scapular motion and compensation of levator scapulae (LS) muscle activated simultaneously with UT during SPT exercise. Objects: The purpose of this study was to compare the effects of modified SPT with depression exercise versus SPT exercise on serratus anterior (SA), lower trapezius (LT), UT, and LS muscle activities and the clavicular tilt angle, in subjects with rounded shoulder posture (RSP) and myofascial pain in the UT muscle region. Methods: Eighteen subjects with RSP were recruited and randomly allocated to 2 groups; 9 in the SPT group and 9 in the SPT with depression group. All subjects met the specific RSP criteria and had myofascial pain of UT region. Depending on the allocated group, subjects performed the assigned SPT exercise and EMG data were recorded during the each exercise. Clavicular tilt angle was defined as the angle between the line joining the medial and lateral end of the clavicle and a horizontal line. Results: The SA muscle activity was significantly greater in SPT with depression than with SPT exercise (p<.05). The UT, LS muscle activity and the clavicular tilt angle was significantly lower in SPT with depression than with SPT exercise (p<.05). Conclusion: These findings were insightful because the potential risk of pain from overactivation of the UT and LS was considered, in contrast with SPT exercise. SPT with depression exercise can be implemented as an effective method to facilitate scapular muscle activity for stability and to prevent myofascial pain in the neck and shoulder.