• Journal of Welding and Joining
• /
• 제16권6호
• /
• pp.104-112
• /
• 1998

In the previous study, the countermeasure for welding deformation of bracket tilt is through up through experimental inspection for total process including welding process. For completeness of systematic examination of parts having sensitivity on welding deformation, the comparison and feedback between the result through simulation of welding process and experimental data is needed. In other words, it is necessary to control welding deformation that construct the prediction system for welding deformation through comparison and tuning with experimental data. In the present study, the application of FEA on welding process of bracket tilt with susceptibility to deformation is made and deformation behavior through change of welding sequence is focused on. It is used to improve the exactness of deformation analysis that three dimensional analysis for moving heat source, activated and deactivated bead element, and volume heat flux etc.

• 한국자동차공학회논문집
• /
• 제8권6호
• /
• pp.130-141
• /
• 2000

The virbration characteristics of a passenger car steering column are studied by using a modal test and a finite element (FE) analysis. To verify the FE model and the results, an experiment using the impact exciting method is performed. Two types of the steering column in this study are considered as follows; (ⅰ) the non-tilt type steering column and (ⅱ) the upper-tilt type steering column. The experimental results are compared with those o the FE analysis, and it ti shown that the results agree with each other. The effects of various design parameters such as the bracket thickness, the column diameter on the natural frequencies are also investigated by FE analysis.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2001년도 제6차 학술대회 초록집
• /
• pp.169-169
• /
• 2001

Purpose： To assess the clinical usefulness of Transfer Insensitive Labeling Technique (TILT) in t evaluation of ischemic cerebrovascular disease. Method： Arterial spin labeling (ASL) is a method of perfusion weighted imaging usin endogenous water as a tracer. To avoid MT-related artifacts, which is common in usual A technique, a transfer insensitive labeling technique (TILT) was used, which globall manipulate macromolecular spins in the same way by both labeling and reference preparatio while free water is labeled in one case and left unchanged in the other. Philips Interal 1.5 T system was used. 40cm FOV and 32 repeated measurements were done because of the wea perfusion signal. 5 slices of supratentorial brain were obtained in 5 patients ｛MCA infar (n=3), moyamoya disease (n=2)｝. We simultaneously obtained contrast enhanced T2＊-weighted perfusion MRI and correlate to TILT images.

• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.43-51
• /
• 2010

Speed, accuracy and smoothness are the important properties of pan-tilt camera. In the case of a high ratio zoom lens system, low vibration characteristic is a crucial point in driving pan-tilt mechanism. In this paper, a novel micro-stepping controller with a function of reducing vibration was designed using field programmable gate arrays (FPGA) technology for high zoom ratio pan-tilt camera. The proposed variable reference current (VRC) control scheme reduces vibration decently and optimizing coil current in order to prevent the step motor from occurring missing steps. By employing VRC control scheme, the vibration in low speed could be significantly minimized. The proposed controller can also make very high speed of 378kpps micro-step driving, and increase maximum acceleration in motion profiles.

• 국제물리치료학회지
• /
• 제10권4호
• /
• pp.1868-1872
• /
• 2019

Background: Lower trapezius muscle function is important for the prevention and treatment of shoulder injuries. However, scapular posterior tilt movement has been overlooked in lower trapezius strengthening exercise programs. Objective: To examine the effects of prone arm lifting with scapular posterior tilt (PALSPT) on trapezius muscles. Design: Crossover study Methods: 17 healthy males were recruited for participation in this study. Participants performed backward rocking diagonal arm lifting (BRDAL) and PALSPT. To train participants in scapular posterior tilt movements for PALSPT, visual biofeedback of scapular movements was provided using a motion sensor. Electromyography (EMG) activities of the middle and lower trapezius were recorded using a surface EMG system. Differences in middle and lower trapezius muscle activity between BRDAL and PALSPT exercises were analyzed. Results: Lower trapezius muscle activity was significantly greater during PALSPT than during BRDAL (p=.006). Although greater EMG activity was observed in the middle trapezius during PALSPT than during BRDAL, this difference was not significant (p=.055). Conclusions: The results of the present study indicate that scapular posterior tilt movements must be considered in lower trapezius muscle strengthening programs.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2010년도 추계학술발표대회
• /
• pp.633-636
• /
• 2010

본 논문에서 Pan, Tilt 카메라를 이용한 객체 추적을 위하여 초기 지역정보를 이용하여 객체를 검출하고 검출된 객체의 색 정보를 이용하여 능동 객체를 추적하는 기술을 제안한다. 외부 환경의 잡음을 제거하기 위해 적응적인 가우시안 혼합 모델링을 이용하여 배경과 객체를 분리한다. 객체가 정해지면 카메라가 이동하는 동안에도 추적이 가능한 CAMShift 추적 알고리즘을 이용하여 객체를 실시간으로 추적한다. CAMShift 추적 알고리즘은 객체의 크기를 계산하므로 객체의 크기가 변하더라도 유동적인 객체 판별이 가능하다. Pan, Tilt의 위치는 구좌표계(Spherical coordinates system)를 이용하여 계산하였다. 이렇게 구해진 Pan, Tilt 위치는 Pan, Tilt 프로토콜을 이용하여 객체의 위치를 화면의 중심에 놓이게 함으로써 적합한 추적을 가능하게 한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권1호
• /
• pp.120-131
• /
• 2016

The full results of troubleshooting process related to the flight control system of a tilt-rotor type UAV in the flight tests are described. Flight tests were conducted in helicopter, conversion, and airplane modes. The vehicle was flown using automatic functions, which include speed-hold, altitude-hold, heading-hold, guidance modes, as well as automatic take-off and landing. Many unexpected problems occurred during the envelope expansion tests which were mostly under those automatic functions. The anomalies in helicopter mode include vortex ring state (VRS), long delay in the automatic take-off, and the initial overshoot in the automatic landing. In contrast, the anomalies in conversion mode are untrimmed AOS oscillation and the calibration errors of the air data sensors. The problems of low damping in rotor speed and roll rate responses are found in airplane mode. Once all of the known problems had been solved, the vehicle in airplane mode gradually reached the maximum design speed of 440km/h at the operation altitude of 3km. This paper also presents a comprehensive detailing of the control systems of the tilt-rotor unmanned air vehicle (UAV).

• 대한물리의학회지
• /
• 제5권3호
• /
• pp.445-453
• /
• 2010

Purpose : The purpose of this study was to investigate the effect of pelvic tilt exercise with changing the body position on foot contact pattern in the hemiplegic patients. Methods : Thirty seven hemiplegic patients were randomly divided 3 groups; control group (CG), sitting exercise group (SIEG) and standing exercise group (STEG). F-mat system and F-scan system were used for the measurement of foot contact pattern of hemiplegic side in walking. Data were analyzed statistically using paired t-test and one-way ANOVA. Results : The results were as follows : 1) Contact area of CG and SIEG were not significant difference in walking. Contact area of STEG was significant increased in walking. 2) Anteroposterior distance of COP of SIEG and STEG were significant increased in walking. Conclusion : These results suggest that pelvic tilt exercise in sitting and standing position are effective in the improvement of Anteroposterior distance of COP and gait stability are increased in only standing position.

• 로봇학회논문지
• /
• 제5권4호
• /
• pp.294-301
• /
• 2010

In order to produce a convenient robot for the aged and the lower limb disabled, it is needed for the research detecting implicit walking intention and controlling robot by a user's intention. In this study, we developed sensor module system to control the walking- assist robot using FSR sensor and tilt sensor, and analyzed the signals being acquired from two sensors. The sensor module system consisted of the assist device control unit, communication unit by wire/wireless, information collection unit, information operation unit, and information processing PC which handles integrated processing of assist device control. The FSR sensors attached user's the palm and the soles of foot are sensing force/pressure signals from these areas and are used for detecting the walking intention and states. The tilt sensor acquires roll and pitch signal from area of vertebrae lumbales and reflects the pose of the upper limb. We could recognize the more detailed user's walking intention such as 'start walking', 'start of right or left foot forward', and 'stop walking' by the combination of FSR and tilt signals can recognize.

• 한국인터넷방송통신학회논문지
• /
• 제17권1호
• /
• pp.199-206
• /
• 2017

환경 잡음은 음성인식 시스템의 성능을 떨어뜨릴 수 있다. 이 논문은 인식 시스템이 잡음에 강인하도록 만들기 위하여, 켑스트럼에 기초한 특징 보상을 수행하는 과정을 제시한다. 이 방법은 부가적인 잡음의 영향을 제거하기 위한 직접적인 스펙트럼 기울기 보상에 기초를 둔다. 잡음 보상 방법은 로그 전력 스펙트럼의 스펙트럼 기울기 계산에 의하여 캡스트럼 영역에서 동작한다. 스펙트럼 보상은 SNR에 의존하는 켑스트럼 평균 보상 방법과 함께 사용된다. 백색 가우스 잡음, 지하철 잡음 및 자동차 잡음에 있는 조건에서, 실험 결과는 제안한 보상 방법이 여러 SNR에서 인식률을 상당히 개선한다는 것을 보여준다.