• Korean Journal of Environmental Agriculture
• /
• v.28 no.1
• /
• pp.53-58
• /
• 2009

The propose of this study was to find out optimum conditions for no-tillage rice-winter cover crops cropping system. A field research was conducted to evaluate productivity and quality of rice cultivars (Dongjinbyeo and Junambybyeo) in rice-winter cover cropping systems at Doo-ryangmyeon., Sacheon, Gyeongsangnam-do, Korea from January 2005 to October 2006. The experimental soil was Juggog series (fine silty, mesic family of Fluvaquentic Eutrndepts). The rice cultivars were experimented under some different high residue farming systems, i.e. no-tillage no treatment (NTNT), no-tillage amended with rice straw (NTRS), no-tillage amended with rye (NTR), no-tillage amended with Chinese milkvetch (NTCMV), tillage no treatment (TNT), and conventional cropping system (Control). The miss-planted rate was 8.8% in 2005 and range of 10.8% to 13.3% in 2006 at NTR, and the other treatments were carried out at miss-planted rate ranging from 1.2% to 5.0%. Tiller numbers of Junambyeo, and Dongjinbyeo in both of years were the highest in Control, and decreased nearly in NTCMV, NTR, NTRS, NTNT, and TNT in that order. The lowest grain yield was observed in TNT both cultivars due to the lower tiller numbers per area, and spikelet numbers per panicle. Also, no-tillage treatments were lower grain yield than control. On the other hand, 1,000-grain weight was lowest in control due to higher tiller numbers per area, and spikelet numbers per panicle. Ripened grain ratio was a similar aspect in all treatments. The palatability score of milled rice was lowest in control while protein content of milled rice was highest in control. The NTCMV was considered an effective sustainable farming practice for rice yield and quality.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.6
• /
• pp.510-518
• /
• 2013

Corn was mainly cultivated in slope land during summer season when heavy rain falls so that soil loss occurs severely. Especially, soil disturbance and exposure of topsoil by conventional tillage intensifies soil loss by heavy rain. The aim of this study was to develop surface covering and tillage methods for reducing soil loss in corn cultivation. The experiment was conducted in 17% sloped lysimeter with 8 treatments including strip tillage after surface covering with rye residue, strip tillage after residue covering of several crops and sod culture, black polyethylene film covering after conventional tillage and control. Amount of runoff water and eroded soil, and corn growth were investigated. Amounts of runoff water in all plots except black polyethylene plot ranged from 152 to 375 $m^3\;ha^{-1}$, accounting for 13~32% of 1,158 $m^3\;ha^{-1}$ in control. Amount of eroded soil decreased by 94 to 99% (3 to 89 kg $ha^{-1}$) in plots of strip tillage after covering with crop residues compared to control with 1,739 kg $ha^{-1}$. Corn yields in plots of strip tillage after covering with crop residues ranged from 6.0 to 6.9 Mg $ha^{-1}$, while that of control was 6.5 Mg $ha^{-1}$. The results suggest that strip tillage methods after surface covering with crop residues are very effective on soil conservation of slope land in corn cultivation.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.178-187
• /
• 2000

The tillage operation by rotary implements is widely done in Korea. In the case of rotary implements, the tillage depth control system is one of important implement control systems. A contact type-sensor for measurement of the ground height was designed and fabricated to evaluate the possibility of application of the sensor on the tillage depth control system. Indoor experiments were conducted to obtain static and dynamic detection characteristics of the sensor under various conditions; 1) several moisture contents for four soil samples, 2) two soil surfaces with a designed configuration, 3) four heights of the sensor from the soil surface, 4) five traveling speeds of the carrier on which the sensor was attached, and so on. The experimental results showed the detection characteristics of the sensor sufficient as the ground height sensor of the tillage depth control system.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.304-312
• /
• 2016

Purpose: Soil strength has been measured using a cone penetrometer, which is making it difficult to obtain the spatial data required for precision agriculture. Our objectives were to evaluate real-time horizontal soil strength (RHSS) to measure soil strength in real time while moving across the field. Using the RHSS data, the tillage depth was determined, and the power consumption of a tractor and rotavators were compared. Methods: The horizontal soil-strength index (HSSI) obtained by the RHSS was compared with the cone index (CI), which was measured using a cone penetrometer. Comparison analysis in accordance with the measurement depth that increased at 5-cm interval was conducted using kriged maps at six sensing depths. For tillage control and evaluation of the power consumption, the system was installed with a potentiometer for tillage depth, a torque sensor from the rear axle, and a power take-off (PTO) shaft. Results: The HSSI was lower than the CI, but they were the same at 54.81% of the total grids for the 5-cm depth and at 3.85% for the 10-cm depth. In accordance with the recommended tillage map, tillage operations between 0 and 15 cm left 2.3% and 7% residue cover on the soil, and that between 20 and 10 cm covered a wider utilization of 3% and 18.4%, respectively. When the tillage depth was 15 cm, the comparison result of the power requirements between the PTO and rear axle in terms of control performance revealed that the maximum power requirements of the axle and PTO were 44.63 and 23.24 kW, respectively. Conclusions: An HSSI measurement system was evaluated by comparison with the conventional soil strength measurement system (CI) and applied to a tractor to compare the tillage power consumption. Further study is needed on its application to various farm works using a tractor for precision agriculture.

• Korean Journal of Agricultural Science
• /
• v.37 no.1
• /
• pp.113-121
• /
• 2010

Land consolidation ratio for rice paddy fields reached to 64.7% as of 2008 in Korea, and this also accelerated automation of field machinery. Especially, research on autonomous tractors has been continuously conducted. Tillage is one of the labor-, energy-, and time-consuming field operations. Most important requirements for autonomous tractors would be travelling path planning and electronic system to control the tractor to follow the path. The instruction of computer was required to conduct the tillage operation in field with unmanned traveling tractor. This instruction was coincidently used in the control of the traveling path and the motion of tractor. The objectives of the study were 1) to characterize and model tillage operating sequence, turning pattern, and 2) to develop tillage path formation programs for autonomous tractor and evaluate the performance.

• Journal of Biosystems Engineering
• /
• v.33 no.1
• /
• pp.7-13
• /
• 2008

The tillage depth control system is one of the most salient control system of tractor implements. A contact-type height sensor was developed to measure ground clearance for the tillage depth control. The height sensor was fabricated in this study, and its efficacy in a tillage depth control system was evaluated. Experiments were conducted in order to determine both static and dynamic detection characteristics of the height sensor using soil bin system on the sampled soil (sandy loam, sand, clay loam). The results of the static detection characteristics showed that in the case, sandy loam soil despite and clay loam soil at a wet basis moisture content of 30%, large measurement errors were observed a due to penetration of a plastic puck into the sampled soil. The results of the dynamic detection characteristics showed that the height sensor detected the distance from the ground of sandy loam soil despite the uneven nature of the ground surface and the changes in traveling speed $1km/h{\sim}5km/h$ at a wet basis moisture content of 10%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.6
• /
• pp.425-431
• /
• 2014

Most fields in highland areas are covered with rye or hairy vetch for conservation during a fallow. However, using cover crops needs an effort to sow, and this makes top soil more vulnerable to loss due to surface disturbances. The aims of this study were to develop an automatic seeding-regulator device using a low-price, extensive-use GPS sensors and a DC motors and to evaluate a working efficiency of it after adaptation to partial tillage machine for reducing seeding effort. The amount of runoff water and soil loss was evaluated with partial tillage and simultaneous-seeding after harvesting soybean, in 17% slope lysimeters. In results, the seeding amount with the machine speed was stable between $0.5{\sim}0.8m\;s^{-1}$ of working sections. The automatic control device of seeding-rate could be enough to solve the slip problems of power selecting supply system or five four-wheel drive device. In partial tillage and simultaneous seeding, runoff water was 11.6% ($1.8m^3ha^{-1}$) of the scatter-seeding control ($15.5m^3ha^{-1}$) and soil loss was 13.2% ($7kg\;ha^{-1}$) of the scatter-seeding control ($53kg\;ha^{-1}$). These results suggest that partial tillage and simultaneous-seeding methods are very effective in decreasing work effort and soil loss of sloped land.

• Korean Journal of Weed Science
• /
• v.16 no.3
• /
• pp.176-180
• /
• 1996

In order to estabilish a labour-saved and environmental protected paddy rice system in Southern Korea, new system, called no-tillage paddy system, was proposed and investigated from 1988 to 1996. Under the no-tillage paddy system, occurrence pattern, control value and regrowth of water foxtail each treatment(herbicides and application dates), and occurrence of volunteer rice plant in application dates of herbicide were investigated. The growth of water-foxtil was markedly increased from middle of May and no. of tillers and dry weight of water-foxtail increased up to 3rd crop year in no-tillage. Glyphosate application for control of water-foxtail was 20 days before transplanting. And when the soil under the no-tillage paddy system in May 1 and May 10 application of herbicide machine-transplanted with 8-day-old seedlings missing hills were increased compared to April 20 and early growth stages of machine transplanted of rice in April 20 applications of herbicide showed increased plant height, no. of tillers of rice, occurrence of volunteer rice plants from the shattered seeds were 1,600plants/10a and decreased in May 10 compared to April 20 and May 1.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.11
• /
• pp.1688-1696
• /
• 2020

Soil physical and chemical characteristics, soil potential denitrification rates (PDR), community composition and nirK-, nirS- and nosZ-encoding denitrifiers were studied by using MiSeq sequencing, quantitative polymerase chain reaction (qPCR), and terminal restriction fragment polymorphism (T-RFLP) technologies base on short-term (5-year) tillage field experiment. The experiment included four tillage treatments: conventional tillage with crop residue incorporation (CT), rotary tillage with crop residue incorporation (RT), no-tillage with crop residue retention (NT), and rotary tillage with crop residue removed as control (RTO). The results indicated that soil organic carbon, total nitrogen and NH₄⁺-N contents were increased with CT, RT and NT treatments. Compared with RTO treatment, the copies number of nirK, nirS and nosZ in paddy soil with CT, RT and NT treatments were significantly increased. The principal coordinate analysis indicated that tillage management and crop residue returning management were the most and the second important factors for the change of denitrifying bacteria community, respectively. Meanwhile, this study indicated that activity and community composition of denitrifiers with CT, RT and NT treatments were increased, compared with RTO treatment. This result showed that nirK, nirS and nosZ-type denitrifiers communities in crop residue applied soil had higher species diversity compared with crop residue removed soil, and denitrifying bacteria community composition were dominated by Gammaproteobacteria, Deltaproteobacteria, and Betaproteobacteria. Therefore, it is a beneficial practice to increase soil PDR level, abundance and community composition of nitrogen-functional soil microorganism by combined application of tillage with crop residue management.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.7
• /
• pp.593-598
• /
• 2006

This study was conducted to investigate the effect of tillage methods such as plowing and rotary tillage (PRT), rotary tillage (RTG), no-tillage after barley straw application (NTB), and barley straw mulching after plowing and rotary tillage (BPR) on the growth and the yield of soybean when cultivated after the cultivation of barley. The methods were compared with the control method in which plowing and rotary tillage after barley straw incineration was applied. Barley straw application resulted in increase in organic matter, total nitrogen, phosphate, and exchangeable cation regardless of tillage methods. Porosity and moisture level in paddy soil was ranked as follows : PRT > RTG > BPR > control > NTB. Decomposition rate of barley straw dramatically increased to 41.7% toward 30 days after soybean sowing, higher in NTB, DRB, and RTG than in BPR. Weed occurrence was decreased 36% in NTB and 40% in BPR. Root activity, nodulation and the dry weight per plant of soybean at flowering stage were highest in NTB and lowest in PRT. Soybean yield in NTB was 3,070 kg/ha increasing 19%, whereas that in PRT was not increased. Therefore in case of a frequent rain during the cultivation of soybean in paddy field PRT could result in excess moisture level in soil, the cultivation without tillage is desirable.