• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.988-995
• /
• 2019

In this paper, we propose the Tile Based Frequency Hopping - Chirp Spread Spectrum(TBFH-CSS) technique, which has excellent Low Probability of Intercept(LPI)/Anti-Jamming(AJ) performance. Conventional Frequency Hopping - Chirp Spread Spectrum(FH-CSS) technique uses only single chirp signal, that makes the follower jammer easy to find and jam. However, proposed TBFH-CSS uses various kind of chirp signals which are generated according to the structure of basis tile, it is composed the basis time unit and the basis bandwidth unit. The TBFH-CSS signal has variety signal period and signal bandwidth. Therefore, the follower jammer hard to find and difficult to jam the TBFH-CSS signal. We analysis the LPI/AJ performance of the TBFH-CSS technique when the follow jamming attack exist and compared with the performance of the conventional FH-CSS technique. From the analysis, we can see the proposed TBFH-CSS technique has better LPI/AJ performance than conventional technique.

• Journal of the Korean Society of Tobacco Science
• /
• v.4 no.2
• /
• pp.57-61
• /
• 1982

For evaluating kinetic parameters of various reactions and materials a straight- forward method has been studied by the variable heating rate method in DSC analysis. Based on the linear relationship between the logarithm of the heating rate and reciprocal Peak temperature, this method allows calculation of activation energy and the Arrhenius frequency factor by only one observation of the peak temperature versus the heating rate. According to tile D function, D=-In P(x)/dx, to x(=$\frac{E}{RT}$) we can calculate reasonably accurate activation energy, tile Arrhenius factor and the rate constant, and predict half-life times of various materials from the kinetic calculation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1663-1667
• /
• 2003

This thesis is on tile development of LD(Laser Diode) chip tester and the control system based on graphical programming language(LabVIEW) to control the equipment. The LD chip tester is used to test the optic power and the optic spectrum of the LD Chip. The emitter size of LD chip and the diameter of the receiver(optic fiber) are very small. Therefore, in order to test each chip precisely, this tester needs high accuracy. However each motion part of the tester could not accomplish hish accuracy due to the limit of the mechanical performance. Hence. an image processing with machine vision was carried out in order to compensate for the error. and also a load test was carried out so as to reduce tile impact of load on chip while the probing motion device is working. The obtained results were within ${\pm}$5$\mu\textrm{m}$ error.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.18-20
• /
• 2000

공간 데이터베이스를 권한이 없는 사용자의 접근, 고의적인 파괴 혹은 우발적인 사고로부터 보호하기 위하여 공간 데이터베이스에 대한 보안정책의 수용이 필요하다. 보안등급의 적용 단위는 필드, 객체, 레이어 단위의 방법이 있으며, 객체 단위의 보안등급 적용은 인접한 객체의 위상관계에 의한 정보 유출의 문제점이 있고, 레이어 단위 보안등급의 적용은 공간 객체에 대한 사용자의 접근성을 저하시키는 문제를 발생시킨다. 본 논문에서는 공간 객체에 대한 사용자의 접근성을 향상시키기 위하여 타일 단위의 접근제어 기법을 제안한다. 타일 단위 접근제어 기법은 보안등급 적용 단위를 타일(Tile)로 하며 레이어, 지도의 보안등급은 하위 수준인 타일과 레이어에 부여된 보안등급의 최하위 등급으로 각각 설정한다. 제안한 기법의 구현을 위해 타일의 구조와 스키마를 정의하고, 보안 유지를 위한 연산 제약사항을 기술한다. 연산 제약 사항은 기본적으로 BLP의 속성을 따르고, 상위 등급 객체에 대한 수정 방지와 하위 등급 객체에 대한 수정 허용을 위해서 BLP 속성을 확정한다. 제안된 기법은 레이어 단위의 접근제어 기법에서 발생하는 문제점을 해결하여 객체에 대한 사용자의 접근성을 향상시키며 인접한 객체 사이의 위상관계에 의한 정보의 유출을 방지한다.

• Proceedings of the KWS Conference
• /
• 1996.05a
• /
• pp.13-14
• /
• 1996

High Frequency Electric Resistance Welding process has been widely used in manufacturing welded steel pipes because of its high welding speed and quality. This process utilizes the skin effect as well as the proximity effect of the high frequency current in heating the skelp edge. In this study, an analytical solution of the edge temperature was obtained based on several assumptions. The assumptions includes the expontial decay of weldingcurrent from the surface and neglect of the heat loss in the welding direction. This calculation shows a good agreement with the observations made from the high speed camera. Using tile analytical model, tile heat required as a function of the welding speed and the skelp thickness was determined. These results were compared with the experimental results obtained.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06b
• /
• pp.4-6
• /
• 2012

본 논문에서는 신속하고 정확하게 건물의 외곽선을 추출하기 위해서 항공 라이다 데이터를 타일 단위지형 분류 기법을 이용하여 분류하고, 건물 관련 타일의 항공영상으로부터 에지 정보를 추출하여 정확하게 건물 외곽선을 추출하는 기법을 제안한다. 제안된 건물 외곽선 추출 기법에서는 대부분의 연산을 타일 단위로 수행하고 항공영상의 특징 추출 범위를 건물 영역에 집중시킴으로써 건물의 외곽선을 정확하게 추출하는 과정의 처리속도를 개선하였다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.261-266
• /
• 2003

The present paper theoretically investigates characteristics of moment balance of a tilting-pad thrust bearing. Pressure of lubricant film of the bearing was computed using tile finite element method, and average film temperature was estimated from the heat balance over a pad. From the investigation, it has been found that different two sets of tilt angles satisfy moment equilibrium of the pad about tile pivot for a given pivot location. The tilt angles converged depend upon initial tilt angles assumed. Quite different bearing performance, including load capacity, film thickness, and temperature, is shown to be obtained based on choice of the initial tilt angles.

• Nuclear Engineering and Technology
• /
• v.3 no.2
• /
• pp.59-64
• /
• 1971

This paper presents an approach to control that if a result of modern control theory, and is based on tile control philosophy of feeding back all tile state variable through constant gain frequency independent elements. The values of these elements or feedback coefficients are determined by equating like coefficients of the desired system transfer function to the transfer function of the system containing the unspecified coefficient s. This application of modern control law is a simple design method depending on feedingback all the system variables for reactor control and it is particuraly amenable to the control of Pressurized Water Reactor.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.53-56
• /
• 2002

In this paper, we study the network structure that can guarantee the end-to-end quality of service in the Explicit multicast network. In order to guarantee the end-to-end quality of service, we adopt the end-to-end measurement based admission control (EMBAC) scheme. For the effective measurement of the network state and minimum influence on the current data traffic, the queue structure, which the drop precedence in assured forwarding (AF) Per hop behavior (PHB) of the differentiated service (Diffserv) is applied to, is proposed. Through a simulation, we show that EMBAC can make tile controlled load service in tile AF PHB applied Xcast network, and the qualify of the admitted traffic is guaranteed. In addition, the performance of the EMBAC is changing according to the selling parameter of AF PHB.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.171-174
• /
• 2002

In this study, we proposed a specification which is able to estimate tile uncertainty more easily and quickly and also able to maintain a confidence level when measuring tile magnitude and phase of 1-port and 2-port transmission.reflection coefficient using a VNA and attached coaxial cable probes. This proposed specification is available when it needs extra special condition of uncertainty estimation and when there is no additional standard equipment like as beadless airline or mismatch standard at the measurement institute. We compared and examined this proposed uncertainty estimation method with recommended EA specification and Agilent specification. As a result, we think that this proposed specification can be used as a reference for uncertainty estimation and calculation of VNA system, that is, a reference based on the IS0/1EC 17025 requirements.