• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.233-236
• /
• 2002

This paper has been designed and fabricated C-type micro, high-performance solenoid RF chip inductors with the size of 1.58$\times$0.82r0.94m0. The high frequency characteristics of simulated results obtained by HFSS were compared to those of measured results obtained by RF Impedance/Material Analyzer (HP16193A). Although the simulated inductance values were two times larger than the measured values and there are discrepancies in SRFs between simulated and measured values, it was observed that tile Q-factor values for fabricated inductors could be predicted from the simulated values.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.88-92
• /
• 2004

Mufflers have been important elements in engineering practice, which reduce various kinds of noises because of its general capability of application. Many kinds of methods :Ire applied to analyze their characteristics and to expect their performances. Some of the methods, conventionally, are based on the plane wave assumption for its simplicity. The shortcoming of this approach is its limitation of analysis ranges and parameters related with analysis and response. This research employs the boundary element method f3r the analysis of mufflers, which considers 3 dimensional scattering effects. This method can be used more appropriately fur tile analysis of mufflers because its analysis ability for higher frequency range which can be decided by the element size of the model. And, experimental analysis using a reciprocity theorem is conducted to verify the analysis results.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.218-220
• /
• 2003

In this paper, tile SMD isolator for IMT-2000 handset is designed, fabricated and analyzed. We have designed the SMD isolator using EM Simulation tool. Electrical results have improved in comparison with a conventional model. It provides an insertion loss of 0.3 dB at 1.95GHz and an isolation of 21.5 dB or more over a frequency range of 1.92 through 1.99 GHz. The size of the isolator is $4\times4\times1.8mm^3$.

• Journal of the Korean housing association
• /
• v.9 no.3
• /
• pp.133-144
• /
• 1998

The purpose of this study is to analyze housing expectations and housing preferences of college students' first purchased house for the future. Data was collected through self-administered questionnaires for this study and the samples consisted of 797 college students. This study found that college students preferred a high-rise apartments, a 20-24 pyung (66.0㎡-79.2㎡) house in housing size and relatively new house. The housing features and interior features that college students like to have and expected to have in the first residence were different. Their housing expectations were fairly realistic considering their affordability. College students preferred to furnish video and audio equipments, exercise equipments and ceiling fans. They generally preferred hardwood floorings and decorative moldings and expected to have built-in closet in their master bedrooms. They expected to have linen closets and large mirrors in their bathrooms. They preferred ceramic tile counter tops, wood cabinets, vinyl floorings in their kitchens and they also preferred to use kitchen as a utility.

• Journal of the Korean Society of Safety
• /
• v.6 no.4
• /
• pp.53-57
• /
• 1991

Engineers of building construction have made efforts to produce more convinient building of good quality through the development of technology and raw materials nowadaye. This study is conducted to recognize problems of exterior tiles through experiments on quality of tiles according to sizes, and to find out and Iecommend most suitaff sizes of tiles. The sizes which are used widely in Construction field are selected as,45$\times$45mm, 57$\times$87mm, 60$\times$108mm, 60$\times$187mm, 96$\times$200mm. Ready mixed compound are used as mortar and Compressed attachment method are used.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.287-290
• /
• 2002

This paper rotates to tile FPGA that is reffered to as the UTOSPI. The design goal of the FPGA is to convert the UTOPIA-3 bus interface to the SPI-3 bus interface, so that the SAR chips on the ATM interface board can be interfaced to the packet processor through this FPGA. We Propose a new architecture that has two Dual Port RAMs and flow control signals. To buffer data, the UTOSPI has a Dual port RAM in the receive direction and the same size of that in the transmit direction. This design has been implemented, compiled, and tested using a Xilinx Virtex-I XCV-300E FPGA.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10b
• /
• pp.167-171
• /
• 2007

본 논문에서는 타일의 크기를 적응적으로 결정하는 모자이크 방법을 제안한다. 우리는 이미지에서 에지(Edge)를 추출한 뒤, 결과 영상이 이 에지 정보를 보존하고, 각 타일들이 이 에지를 따르도록 한다. 에지 정보를 보존 하기 위하여 무게중심 보로노이 다이어그램(CVD: Centroidal Voronoi Diagram)을 계산할때 에지 회피기법을 적용하며, 에지를 따르는 타일을 생성하기 위하여 에지를 따르는 방향과 맨해튼 거리(manhattan distance)가 적용된 무게중심 보로노이 다이어그램을 사용한다. 이때, 우리는 그래픽 처리 장치(GPU: Graphics Processing Unit)를 이용하여 방향맵이나 보로노이 다이어그램을 더욱 빠르게 구할 수 있다. 우리는 타일의 크기를 각 보로노이 영역의 넓이에 비례하게 정함으로써, 기존의 모자이크 방법들이 해결하고자 했던 타일의 겹침 문제와 타일간의 빈 공간 문제를 개선하였다.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.17-26
• /
• 1999

This paper studies on the benefit evaluation of urban railway construction project. We compares Korean Method with Japanese in calculating the generalized cost(GC) of a trip. In Japan, the disadvantage of transferring to another mode or line is included to calculate GC of trip. And environmental effects are contained directly as rail construction benefit. But in Korea, inconvenience of transferring facilities like stairways and passageway for riding a subway is not accounted to analyse benefit. As a result, there is a little investigate to improve and overcoming the inconvenience facilities of transfer, access, and egress. So, we suggest the containing the disadvantage measure of transferring facilities when subway riderships are forecasted. That will be reduced tile capital size of subway.

• Conservation Science in Museum
• /
• v.20
• /
• pp.31-48
• /
• 2018

The Geumganasa Temple site two Ridege-end tiles at the Buyeo National Museum(The Buyeo2150-1 and 2150-2, hereinafter referred to as 2150-1 and 2150-2) were excavated the Geumgangsa Temple site. They provide important materials for investigating the shapes and production techniques of the ridge-end tiles of the time since their lower portions remain relatively intact. This study is intended to examine whether the two ridge-end tiles were identical. Conservation treatment, including removal of foreign substances, was conducted in preparation for observation with the naked eye to compare the formal features and production techniques of the two examples. The study revealed that these ridge-end tiles shared formal features such as surface color, clay composition, shape, size, and decoration; however, they differed in terms of production technique. The 2150-1 tile was made by assembling a separately-made body and wing and has no hole through the back, while the 2150-2 tile had its body and wing made as a single unit using long clay plates and features circular holes in the back. It was revealed that one portion of the body of both tiles was intentionally tilted during the production process.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2396-2401
• /
• 2009

This study is on development of UV-cured hard coating compounds which have more improved abrasion resistance than existing UV-cured urethane-acrylic resin, to prevent a surface of a widely used PVC tile as a constructive material from being scratched. To make a high abrasion resistant hard coating solution compared to UV-cured urethane-acrylic resin which has no abrasion resistance and been used for PVC tiles, we added powder substances of different abrasion resistant level, $Al_2O_3$(Al-160SG-3), $Al(OH)_3$(SH-8W), $SiO_2$(KS-5000), etc., to the resin, changing their contents from 10% to 30% against quantities of resin, and compounded it using Ring-Mill. After coating PVC tiles with the hard coating solution using bar-coating method that can adjust a thickness, we estimated some surface properties-abrasion resistance, pencil hardness, adhesive power, thickness of coating, and so on. As a result, a hard coating solution added 30% $Al_2O_3$ powder to the resin had the finest surface properties-the first grade in abrasion resistance, H in pencil hardness, 100% in adhesive power, and a hard coating solution which showed excellent solidity and abrasion resistance has smaller particle size, higher powder content, and thicker coating thickness.