• Journal of Life Science
• /
• v.14 no.1
• /
• pp.131-140
• /
• 2004

T7 bacteriophage gp4 is the replicative DNA helicase that unwinds double-stranded DNA by utilizing dTTP hydrolysis energy. The quaternary structure of the active form of T7 helicase is a hexameric ring with a central channel. Single-stranded DNA passes through the central channel of the hexameric ring as the helicase translocates $5'\rightarrow3'$ along the single-stranded DNA. The DNA unwinding was measured by rapid kinetic methods and showed a lag before the single-stranded DNA started to accumulate exponentially. This behavior was analyzed by a kinetic stepping model for the unwinding process. The observed lag phase increased as predicted by the model with increasing double-stranded DNA length. Trap DNA added in the reaction had no effect on the amplitudes of double-stranded DNA unwound, indicating that the $\tau7$ helicase is a highly processive helicase. Global fitting of the kinetic data to the stepping model provided a kinetic step size of 10-11 bp/step with a rate of $3.7 s^{-1}$ per step. Both the mechanism of DNA unwinding and dTTP hydrolysis and the coupling between the two are unaffected by temperature from $4∼37^{\circ}C$. Thus, the kinetic stepping for dsDNA unwinding is an inherent property of tile replicative DNA helicase.

• Journal of Chest Surgery
• /
• v.36 no.6
• /
• pp.451-455
• /
• 2003

In August 2000, the American Heart Association and the European Resuscitation Council published the conclusions of tile International Guidelines 2000 Conference on Cardiopulmonary Resuscitation and Emergency Cardiovascular Care which contains both the new recommendations and an in-depth review. The most important changes in the recommendations according to the authors are discontinuation of the pulse-check for lay people, 500 ml instead of 800∼1,200 ml tidal volume during bag-valve-mask ventilation (FiO2 > 0.4) of a patient with an unprotected airway, unifying correct endotracheal intubation size as 8.0 mm, vasopressin (40 units) and epinephrine (1 mg) as comparable drugs to treat patients with ventricular fibrillation, early prehospital survey and intravenous lysis for patients who have suffered coronary artery syndrome and stroke.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.12
• /
• pp.513-519
• /
• 2002

This paper proposes a high-speed FFT processor for orthogonal frequency-division multiplexing(OFDM) systems. The Proposed architecture uses a single-memory architecture and uses a radix-4 algorithm for high speed. The proposed memory is partitioned into four banks for high-speed computation. It uses an in-place memory strategy that stores butterfly outputs in the same memory location used by butterfly inputs. Therefore, the memory size can be reduced. The SQNR of about 80dB is achieved with 20-bit input and 20-bit twiddle factors. The architecture has been modeled by VHDL and logic synthesis has been performed using the SamsungTM 0.5㎛ SOG cell library (KG80). The implemented FFT processor consists of 98,326 gates excluding memory. It has smaller hardware than existing pipeline FFT processors for more than 1024-point FFTs. The processor can operate at 42MHz and calculate a 256-point complex FFT in 6us. It satisfies tile required processing speed of 8.4㎲ in the HomePlug standard.

• Korean Journal of Agricultural Science
• /
• v.5 no.1
• /
• pp.29-34
• /
• 1978

In order to improve atomization of droplet of sprayers, gun-type nozzle equipped with swirl screw which could increase tangential velocity had been used in this study. The results obtained were as follow: The larger diameter of atomized droplet was, the longer it reached. Tile atomizing phenomenon while using swirl screw in the nozzle was more efficient. There was little difference of travelling distance in the both nozzles when the small diameter of disk hole was used, but thetravlling distance of the nozzle with swirl screw was evidently getting shorter with the increase of the hole diameter compared to that of the nozzle without swirl sorew. The size of sprayed particles was getting smaller owing to the phenomenon of air movement the one to two meters travelling distance of droplet from maximum travelling point.

• Composites Research
• /
• v.14 no.1
• /
• pp.1-7
• /
• 2001

In this study, damage evaluation of glass fiber reinforced thermoplastic composites was investigated with acoustic emission method. Specimens of 1.7mm thickness laminate were made from PET and 7 layers o171ass fabrics. Notch and impact loading were added to the specimen and normal tensile test and tensile test with the dead load were carried out. AE signal was measured as the functions of notch ratio to the width0 and impact energy in order to find out the correlation between fracture mode and AE parameters. The result has shown that low amplitude of AE signal was due to the microcrack of matrix and its growth, whereas the amplitude in the mid range was the response to the delamination and interfacial separation. In the range of high amplitude above 90dB. the fracture of glass fabric was found. Tensile strength decreased with increasing notch ratio to the width and impact energy because of tile effect or delamination, the cracking of matrix and stress concentration. In proportion to the size of damaged area. AE signal showed its wider range of frequency and energy as well as increased number of hits.

• Journal of the Korean Society of Costume
• /
• v.66 no.8
• /
• pp.78-97
• /
• 2016

The purpose of this study is to develop textile pattern designs by utilizing the prototype of traditional culture extracted from cultural resources in order to establish a specialty strategy for local cultural contents. To achieve this, the study selected the Hyojaemunjado as source of Jeju traditional culture. Jeju's Hyojaemunjado is characterized mainly by the creative and unique formativeness of Jeju's character paintings. Character paintings often contained images related to the characters featured inside characters, or composed stroke with symbolic iconography. The main subjects of Hyojaemunjado were stories that alluded to the Confucian virtues. Therefore, the purpose of this study was to remind people of the real meaning of Shin(truth) by developing textile pattern designs, which borrows the tessellation technique for design, and the dominant characteristic of geometric abstraction. This study used theoretical research and empirical analysis. First, the study did the theatrical research on Hyojaemunjado based on literature and precedent studies, and then analyzed the style of expression and formativeness on the Shin character paintings through real analysis of Jeju's Hyojaemunjado kept in Jeju National University Museum. Second, based on the analysis of the style(three-tier composition) and formativeness of Hyojaemunjado, it analyzed the formativeness of the iconography about Shin, i.e. character types(semi cursive style, square style) drawn according to the symbolic meaning, palace, unknown flower, pheasant, tile fish and constellation. Based on analysis of the iconography, it stylized the motives that became available on the Archimedean tiling of tessellation, and then developed the textile pattern designs by arranging the iconographic motives with Platonic tiling and Semi-tiling. The reason why this study borrowed tessellation was to create various visual effects using the size of angle, symmetry and change and joint with simple figure.

• Journal of the Korean Institute of Rural Architecture
• /
• v.15 no.4
• /
• pp.35-42
• /
• 2013

The study aims to investigate general characteristics of Jae-sil from an architectural perspective by grasping location, deployment, structure, and plan composition based on existing inhabited conditions in Jeollabukdo. Results derived from the study are as follows. First, the location of Jae-sil is classified into mountainous and village types, and the two types showed a similar distribution. The village type showed the most distribution in the foot of a mountain in the rear of village, while the mountainous type is close to graveyard. The Jae-sil were mostly exposed to south, southeast, and southeast, which was not significantly different from residence. For deployment of the Jae-sil, a "二" shaped house, where main quarter and gated building are parallel located, can be common, indicating that additional attached building is less required. Second, for the platform out of structural components, coursed masonry was conducted by using natural rocks, and placed were a prop on the platform, first line on processed foot stone, and others on natural foot stone. For pillar, front line round columns, while others square columns. The binding type of the upper part of pillar is dominated by jangyeosujang and sorosujang. For wooden frame structure, 5ryangs were the most distributed, and out of these, 1goju 5ryang was the most generally used. For a roof part, it was composed with gambrel roof with single eave, and the roof was constructed by placing traditional Korean tile roof on the top. Third, for a size of Jae-sil out of plan composition, although the facade and the side of it were presented in a diverse manner, 4 facade rooms and 1.5 side rooms were the most frequently presented, and all Jae-sil were equipped with front ceremonial space. For spatial composition of Jae-sil, main floored hall is placed at the center, and each room is placed on the left and right side to secure space for ancestral rite for participants of it, and for a house with 5 rooms or more, it shows that main floored hall and rooms are weighted from side to side.

• Hwankyungkyoyuk
• /
• v.14 no.2
• /
• pp.1-14
• /
• 2001

This study analyzed and compared the number of students activities, contents scope, and organizing system of the three textbooks(A, B, and C) which had been developed and published for the 'Environment'subject in the 7th National Curriculum. The results of this study can be summarized as follows; There were differences in the size, the total number of pages and the quality of print between two groups of 'Environment'textbooks of the 6th and the 7th national curriculum. New textbooks were found bigger than the previous ones by 125%. The total number of pages increased by the average of 16.4%. A and C textbooks were composed of three parts, seven chapters, and 17 sections, whereas B textbook consisted of ten chapters and 23 sections. All of the three textbooks appeared to put an emphasis on the chapters of 'environment protection'and 'environmental problems of the Earth ' A comparative analysis on the number of data included in the three textbooks showed that almost half of data took a form of picture, averaging 48% of the total. A had 297 pictures, and 234 pictures for B, 194 pictures for C, respectively. In terms of the number of students'activities, C was found to include the largest number of activities that is 91, comparing to text A of 85, text B of 78. The number of students'activities in every content is found'environment awaiting protection', tile 'environmental problems of the earth'and'things to be done for the protection of environment'much more than any other parts. It should be noted that this study focused ell only a set of quantitative measures so that teachers are recommended to consider detailed contents that each textbook contains as well as environmental conditions of the school region.

• Journal of Environmental Science International
• /
• v.16 no.5
• /
• pp.603-610
• /
• 2007

Recent urban sprawl has destroyed various kinds of green space in tile city. It has affected duality of people's life in the city, as well as urban ecosystem. Recent study shows the possibilities of roofs as green spaces in urban central site where the land costs are generally high. This research focuses on Jung-Gu district in Daegu Metropolitan city as a study area and calculates possible area of green roof using 2002 Autocad program based on aerial photographs and land registration maps. And the purpose of this research is to analyze environmental and economic effects of green roof. The environmental effects are as follows. It is expected that $91,106m^2$ green spaces, 12.13 % of study site, will be added if green roof is performed in the study site. It is assumed that the expanded areas could reduce the highest temperature to $0.5-1.0^{\circ}C$ during the summer in terms of environmental effect. And the following shows the economic effects. If green roof and greening urban central site are created as a same size of $91,106m^2$, it will be expected that the costs of green roof will be much more in-expensive than about 98 billions won. It will be also found that the expense of cooling energy can be saved out about 8 millions won per day in summer, if grass planting is accomplished on the possible areas of green roof in the study site. Therefore, it is desirable to take legal supports such as enacting regulations to activate green roof for more environmental and economic effects. For instance, green roof for public institutions, school and model area selection are desirable method to publicize the effect of greening program for citizen's participation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.1
• /
• pp.95-122
• /
• 1990

This study was done to analyze the occlusal curve as one of the factors to be considered for maintenance of occlusal stability in the orthodontic and prosthodontic treatments. Sixty gnathological casts we.e obtained from 43 subjects with normal occlusion and 17 subjects with some of temporomandibular disorders. The occlusal surfaces of gnathologic casts were duplicated by using a Color kit SK-700 and tile reference points of X, Y coordinates were digitized by using the Summagraphic digitizer and 18AT computer system. The Z coordinates of cusp height were measured by 0.01mm measurable caliper. The mathematical computer program of least square method was used to analyze the occlusal curve arranged by three dimensional coordinates of X, Y, Z. The following results were obtained : 1. The occlusal curve of buccal and lingual cusp tips was fitted to the ellipse, and the occlusal curve of anterior teeth was fitted to a part of the circle in the analysis of conic sections. 2. The radius of Spee's curve showed individual differences, but was average 98.7mm in male subjects and 93.7mm in female subjects. 3. The radius fo Spee's curve according to the half of canine width showed the least coefficient of variation. 4. The radius of Spee's curve was not significantly relative to the lateral occlusal contacts on laterotrusion and the absence or presence of temporomandibular disorders. 5. The radius of Wilson's curve showed individual difference and the size of radius was followed by the order of 1st premolar, 2nd premolar, 2nd molar and 1st molar.