• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.837-846
• /
• 1989

Belt tension distribution for an abrasive blet grinding was investigated analytically and experimentally for (1) slack side and (2) tight side blet grinding. Classical Eytelwein equation was used to predict the belt tension distribution with dividing contact angles into (1) inactive and (2) active angles. General friction theory was modified based on the friction force between the belt and the support in the grinding contact area that was obtained by experiments. It was found that analytical results were in good agreement with the experimental results. Also, the tight side belt grinding was recommended since it could carry out more grinding load than that of slack side belt grinding.

• Journal of the Korean Home Economics Association
• /
• v.39 no.8
• /
• pp.137-154
• /
• 2001

This study was made to draft the tight fitting bodice pattern which horizontal and perpendicular stands are to be lightly set, with the consideration of characteristics of body shape in design of clothes. Measurement of body was conducted on 53 women in twenties, and observation was made on surface development pattern by adhesive tape addition method and gypsum method on three standard objects. In the study, bodice pattern was completed by using already made Somato- measurer, compared with existing bodice pattern, and the results are as follows. The result of the correlation analysis by body measurement shows that chest circumference has a relation to B$.$P-front neck point, side neck point, shoulder point, front interscye breadth point, and the item in spine scapulae point has relation to the item of back neck line, and front & back horizontal values. The degree of shoulder slant, width of armhole and of its depth, the amount of breast, back space, back length were shown to be directly measured from the body. In surface development pattern, tight-fit bodice pattern necessary to the breast volume and back space were shown to be investigated and these volume have to be given in setting up basic line for clothes design together with body measurement value. The result of sensory evaluation for appearance test on fitness shows higher value of research bodice including line of shoulder line, front and back interscye breadth, chest circumference, waist circumference, armhole circumference and of its depth, compared with the research bodice in most items. The result of this study is seen showing high effectiveness for the basic data to design the ready-made dress of high sensitivity of high value added tat.

• Korean Journal of Food Science and Technology
• /
• v.42 no.3
• /
• pp.335-342
• /
• 2010

Bioactive components involved in the tight junction stabilization of intestinal epithelial cells from Korean red ginseng were studied by analyzing transepithelial electrical resistance (TEER) values of the Caco-2 cell monolayer between the apical and basolateral sides for 96 hr. The treatment with less than $20\;{\mu}g/mL$ of the Korean red ginseng extract to the apical side of Caco-2 cell monolayer gave higher TEER values than the control. However, the treatment with more than $130\;{\mu}g/mL$ of the Korean red ginseng extract drastically decreased the TEER values, and these effects were not due to its cytotoxicity. When fractions of low molecular weight compounds, polysaccharides, proteins, saponins, and polyphenols derived from Korean ginseng were applied to the apical side of the Caco-2 cell monolayer, polyphenols showed high tight junction stabilizing activity and saponins showed low activity, but the others showed no significant activity. These results suggest that Korean red ginseng might be useful for the prevention of food allergy by stabilizing the tight junction of intestinal epithelial cells leading to hindering absorption of food allergens.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.18-21
• /
• 2002

As the mask design rules get smaller, the probability of the process failure becomes higher due to the narrow overlay margin between the contact and metal interconnect layers. To obtain the minimum process margin, a tabbing and cutting method is applied with the rule based optical proximity correction to the metal layer, so that the protection to bridge problems caused by the insufficient space margin between the metal layers can be accomplished. The side-lobe phenomenon from the attenuated phase shift mask with the tight design nile is analyzed through the aerial image simulation for test patterns with variation of the process parameters such as numerical aperture, transmission rate, and partial coherence. The corrected patterns are finally generated by the rules extracted from the side-lobe simulation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.900-905
• /
• 2004

Development of color printer, postal classification machine, ATM and so on requires higher moving performance of the flat belt. Skew of the flat belt running over misaligned roller has a bad effect on performances of media transport. The vibration of loose side of belt causes the escape of the belt from roller and the drop of velocity of driven roller after the start of driving roller revolution. The skew of flat belt is investigated by FEM and dynamic simulation. FEM results show parameters which affect the skew of belt and match with dynamic results qualitatively. The shape of loose side of belt can be found by dynamic simulation. Increase of the acceleration time and initial tension have diminished the unstable movement of the loose side of belt.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.5
• /
• pp.786-798
• /
• 2018

This study is based on anthropometric data from the 7th Size Korea, we selected five subjects with measurements similar to average women in their twenties. The subjects participated in adaptability assessments and appearance assessments of skinny jeans produced by 8 selected brands, to identify the pattern and measurements characteristics of jeans assessed to be superior in appearance and movement adaptability. The results of this study were as follows. First, according to the results of appearance assessment made by the specialist group, B brand earned the highest assessment in response to questions regarding if 'there is an appropriate amount of ease in the crotch area' on the front side and 'an appropriate amount of ease in the hip circumference area' on the back side. Based on the above results, Synthesizing the survey results and the appearance assessment and movement adaptability assessment results, we suggest that when drafting the pattern for the standard size of waist measurement 27 inches (67cm), the hip circumference should be given an appropriate amount of ease, of around -6.6cm (-7.2%). The thigh circumference should be set with an appropriate amount of ease, which is -5.3cm (-9.4%).

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.209-212
• /
• 2002

As the mask design rules get smaller, the probability of the process failure becomes higher doc to the narrow overlay margin between the contact and metal interconnect layers. To obtain the minimum process margin, a tabbing and cutting method Is applied with the rule based optical\ulcorner proximity correction to the metal layer, so that the protection to bridge problems caused by the insufficient space margin between the metal layers can be accomplished. The side-lobe phenomenon from the attenuated phase shift mask with the tight design rule is analyzed through the aerial image simulation for test patterns with variation of the process parameters such as numerical aperture, transmission rate, and partial coherence. The corrected patterns are finally generated by the rules extracted from the side-lobe simulation.

• Biomedical Science Letters
• /
• v.27 no.2
• /
• pp.77-87
• /
• 2021

Reflux esophagitis (RE) is a disease that stomach contents, stomach acid, and pepsin continually refluxing and is curently increasing worldwide. This study was conducted to find natural materials that can reduce side effects and effectively treat RE. Animal experiments were conducted with a 1:1 (EA1), 1:5 (EA5) ratio of Evodiae Fructus and Arecae Semen known to be effective against reflux esophagitis. As a result of confirming the total lesion of the esophageal mucosa after EA1 or EA5 treatment in reflux esophagitis animals, it showed superior improvement compared to the RE-control rats. In addition, by regulating the expression of MPO and NADPH oxidase, the activation of NF-κB was inhibited, and the expression of COX-1 and COX-2 was regulated. Moreover, its improved esophageal barrier function through regulating protein expressions of tight junction protein and MMPs/TIMPs. Taken together, a mixture of Evodiae Fructus and Arecae Semen can attenuate the damage to the esophageal mucosa that not only inactivationed the NF-κB through oxidative stress control, but also by regulating tight junctions and MMPs/TIMPs. This effect was more excellent in the 1:1 mixture (EA1) than in the Evodiae Fructus and Arecae Semen 1:5 mixture (EA5).

• The Research Journal of the Costume Culture
• /
• v.25 no.1
• /
• pp.64-74
• /
• 2017

The purpose of this study is to identify the sensibility images when the direction and width of stripes change on semi-tight skirts. The researcher made 12 stimuli consisting of images of skirts with a combination of six stripe directions and two stripe widths. The images were assessed by 126 subjects who were students majoring in apparel. Three sensibility image factors were found: personality, attractiveness, and activity. Images of skirts with different stripe directions were perceived as having significant differences among these factors. Stripe widths of 1.5cm and 3cm in upward diagonal, vertical side line, and downward diagonal directions influenced the personality factor. Diagonal stripes with a width of 1.5cm positively influenced attractiveness and activity. Stripes in a vertical direction increased attractiveness when the stripe width was 1.5cm rather than 3cm. Although the interaction of stripe direction and width significantly influenced perceptions of attractiveness and activity in images of semi-tight skirts, they did not significantly influence personality. In accordance with the analysis, stripe direction was significantly different for all factors. This analysis indicated that each factor has its own independent influence. Stripe width had major independent effects, showing significance in attractiveness and activity. However, personality did not indicate any significant difference. The results of this study will help women select suitable clothing according to their individual preferences and body shapes by influencing how images are depicted because women will be able to use the images to estimate their body images when the skirts are put on.

• Journal of the Korean Society of Costume
• /
• v.56 no.8 s.108
• /
• pp.113-122
• /
• 2006

In this study, about forty teaching materials have been analyzed in order to examine tight skirt sewing methodtreated in basic process in a college and a fashion related educational institution. The study objects limited with a belt, back centered zipper, and back double slits on a tight skirt, and used fifteen suitable teaching materials in this study. The first study result appeared that every single teaching material suggested the different way of wick adhesion which is used in zipper slit, back slit, and belt part when the skit has been manufactured in order to do a form of clothes well. Secondly, it is the case of a back slit part used for the purpose of both functionality of action and decoration, and it is the section which varies a sewing and cutting way according to seam room width of a back middle seam. However, the majority of teaching materials appeared by being selecting the way how it had cut an inseam of the back center by the both upper part of back slit. Finally, the result showed that it mentioned mainly only both sided zipper sewing method if it seems to be easy to treat the majority in a basic process even though use of a console zipper Is general on a zipper sowing way recently for several years. Also, two forms are used in the belt manufacturing, and they are based with a waist line. However, the teaching materials that were used in this study presented only a manufacture way of the straight line on the waist belt.