• 한국산학기술학회논문지
• /
• 제17권7호
• /
• pp.713-719
• /
• 2016

암모니아를 환원제로 사용하는 선택적 촉매 환원법에서 Mn-Cu-$TiO_2$ 촉매와 $V_2O_5$/$TiO_2$ 촉매를 사용하여 반응 조건에 따른 질소 산화물 전환 특성을 연구하였다. 반응 온도와 공간 속도를 변경시키면서 촉매의 질소 산화물 전환 효율 변화를 측정하였다. Mn-Cu-$TiO_2$ 촉매의 질소 산화물 제거 활성은 반응 온도와 공간 속도가 증가할수록 감소하였으나, $V_2O_5$/$TiO_2$ 촉매의 경우 반응 온도 증가에 따라 촉매의 질소 산화물 제거 활성 또한 증가하였다. Mn-Cu-$TiO_2$ 촉매의 경우 $200^{\circ}C$ 이하의 온도에서 저온 활성이 우수하였으며, 이를 $H_2$-TPR 및 XPS 분석 실험을 통해 확인할 수 있었다. 초기 반응 온도의 변경 실험을 통해 Mn-Cu-$TiO_2$ 촉매의 경우 고온에서 열적 쇼크를 일부 받으나, $V_2O_5$/$TiO_2$ 촉매의 경우는 거의 영향을 받지 않음을 확인할 수 있었다. 공간 속도에 따른 질소 산화물 전환 효율 변화는 C 촉매의 경우 전 구간에 걸쳐 공간 속도가 증가할수록 질소 산화물 전환 효율도 감소하는 경향을 보였다. 그러나 D 촉매의 경우 공간 속도가 증가할수록 질소 산화물 전환 효율은 감소하였으나, 감소 정도가 C 촉매 보다는 훨씬 적었다.

• 공업화학
• /
• 제31권6호
• /
• pp.674-678
• /
• 2020

본 연구에서는 상온 조건에서 추가적인 에너지원 없이 H2 산화가 가능한 Pd/TiO2 촉매를 제조하였고, 지지체인 TiO2의 비표면적은 Pd/TiO2 촉매의 H2 산화 반응 성능과 비례하지는 않은 것을 확인하였다. 또한 촉매의 물성 변화에 의한 성능 영향 평가를 위하여 La2O3를 Pd/TiO2 촉매에 첨가하였다. La2O3를 TiO2에 함량별로 첨가하여 Pd/La2O3-TiO2를 제조하였고, CO chemisorption 분석을 진행하였다. Pd/TiO2(G) 촉매의 전환율(14% at 0.5% H2)과 비교하여 Pd/La2O3-TiO2 촉매가 74% 전환율로 5배 이상의 성능 증진이 나타났다. Pd/La2O3-TiO2 촉매는 활성금속인 Pd의 metal dispersion이 클수록 H2 산화반응에 유리한 것으로 분석되었다. 하지만 첨가되는 La2O3가 10%를 초과하게 되면 촉매 성능이 다시 감소하는 것을 알 수 있었다. 마지막으로 Pd/La2O3-TiO2 촉매의 물성이 지배적인 영향을 미치는 것은 주입되는 H2가 0.3~0.5% 농도 조건까지이며, 1% 이상의 H2 농도부터는 물질전달이 촉매 반응속도를 지배하는 것으로 판단된다.

• 한국환경과학회지
• /
• 제13권6호
• /
• pp.537-542
• /
• 2004

$V_{2}O_{5}/TiO_{2}$ catalysts promoted with Mn were prepared and tested for selective catalytic reduction of NOx in $NH_3.$ The effects of promoter content, degree of catalyst loading were investigated for NOx activity while changing temperatures, mole ratio, space velocity and $O_2$ concentration. Among the various $V-{2}O_{5}$ catalysts having different metal loadings, $V-{2}O_{5}$(1 wt.%) catalyst showed the highest activity(98%) under wide temperature range of $200-250^{\circ}C.$ When the $V-{2}O_{5}$ catalyst was further modified with 5 wt.% Mn as a promoter, the highest activity(90-47%) was obtained over the low temperature windows of $100-200^{\circ}C.$ From Mn-$V_{2}O_{5}/TiO_{2}$, it was found that by addition of 5 wt.% Mn on $V_{2}O_{5}/TiO_{2}$ catalyst, reduction activity of catalyst was improved, which resulted in the increase of catalytic activity and NOx reduction. According to the results, NOx removal decreased for 10%, but the reaction temperature down to $100^{\circ}C.$

• 상하수도학회지
• /
• 제13권3호
• /
• pp.101-106
• /
• 1999

This research aims to compare immobilized catalysts prepared by various methods and determine suitable $TiO_2$ catalyst for water purification. Sol-gel method by Anderson and powder coation method by Tanaka ate famous in the methods to immobilize catalyst. Therefore, the $TiO_2$ catalyst for this research was prepared by sol-gel method and powder coating method. Its structure was tested by X-ray diffractometer (XRD), Scanning electron microseope (SEM). Durability of a catalyst-support couple in an solution was investigated. too. Experimental results were summarized as following; i) Optimum ratio of Ti : $H_2O$ : $H^+$ to obtain stable sol was 1 : 10 : 0.1 and the XRD patterns of $TiO_2$ film immobilized by sol-gel method which were fired at $700^{\circ}C$ showed that the catalyst had an anatase structure. ii) The particle size of $TiO_2$ prepared by sol-gel method was less than $5{\mu}$, but it was observed that coated side was not unifiom. iii) Sol-gel method was very effective to obtain $TiO_2$ catalyst of thin film, but spreadability and durability of a catalyst-support couple in a solution were than $TiO_2$ film immobilized by powder coating method. iv) The particle size of $TiO_2$ immobilized by powder coating method was a little larger than it prepared by sol-gel method, but spreadability and uniformity of $TiO_2$ film and durability of a catalyst-support couple in a solution were better than it immobilized by sol-gel method.

• 한국수소및신에너지학회논문집
• /
• 제27권5호
• /
• pp.471-477
• /
• 2016

In this research, the Ir supported $TiO_2$ (P25) catalyst was prepared by precipitation method for oxygen evolution reaction. The $Ir/TiO_2$ catalyst was synthesised by reduction reaction using reducing agent. Physiochemical characterizations of synthesized $Ir/TiO_2$ catalyst was studied by means of SEM, EDS mapping, TEM and XRD. The Electrochemical characterizations were tested by using the technique of CV and LSV by RDE and Potentiostat. Physicochemical properties were characterized with XRD where Iridium metal morphology and Ir(111) and Ir(222) peaks were founded. $Ir0.2Ru0.8O_2$ exhibited higher OER activity than $Ir0.5Ru0.5O_2$ followed by $Ir/TiO_2$ and $IrO_2$.

• 대한환경공학회지
• /
• 제22권3호
• /
• pp.511-521
• /
• 2000

디젤자동차와 같이 희박연소 상태에서 많이 배출되는 질소산화물을 선택적 촉매환원(SCR)으로 제거하기 위하여 제올라이트와 금속산화물을 조합한 촉매를 석영 반응로에서 설험하였다. 환원제는 자동차 배출가스에 포함되어 있어 실용 가능성이 크다고 판단되는 탄화수소 중 안전성 및 환원효율이 좋은 올레핀계 탄화수소인 프로필렌을 사용하였다. 본 연구에서는 제올라이트 및 금속산화물계의 단일촉매 상태에서의 NOx 전환율을 파악하고, 저옹 및 고온에서 활성이 다른 촉매를 기계적으로 조합하여 NOx 전환 활성 온도창(Temperature Window)을 확대하고 내구성이 좋은 촉매를 찾고자 하였다 0.55wt%Pt-$TiO_2$/5wt%Cu-ZSM-5 촉매와 0.28wt%Pt-$TiO_2$/$Al_2O_3$ 촉매 및 1.1 wt%Pt-$TiO_2$/$Mn_2O_3$ 촉매 모두 $400^{\circ}C$를 변곡점으로 저온과 고온에서 NOx 제거활성이 있었는데, 저온에서 활성이 가장 큰 것은 0.28wt%Pt-$TiO_2$/$Al_2O_3$ 촉매이었고, 고온에서는 1.1wt%Pt-$TiO_2$/$Mn_2O_3$(21) 촉매가 제일 높은 활성을 보였다. 그러나 수분 및 아황산가스 공존시와 열적 내구성 면에서는 0.55wt%Pt-$TiO_2$/5wt% Cu-ZSM-5 촉매가 가장 우수하게 나타났다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권12호
• /
• pp.567-572
• /
• 2002

In these days, diesel vehicle or power plant emits $NO_X\; and SO_2$ which cause air pollution like acid-rain, ozone layer destroy and optical smoke, therefore there are many kinds of methods considered for removing them such as SCR, catalyst, plasma process, and plasma-catalyst hybrid process. T$TiO_2$ is commonly used as catalyst to remove $NO_X$ gas because it have very excellent chemical characteristic as photo catalyst. In this paper, $NO_X$ sensing characteristic of $TiO_2$ thin film deposited by R.F Magnetron sputtering is investigated. A finger shaped electrode on $Al_2$O$_3$ substrate is designed and $TiO_2$ is deposited on the electrode by the magnetron sputtering deposition system. Chemical composition of the deposited $TiO_2$ thin film is $TiO_{1.9}$ by RBS analysis. When the UV is irradiated on it with flowing air, capacitance of $TiO_2$ thin film increases, however, when NO gas is put into the system with air, it immediately decreases because of photo chemical reaction. and it monotonously decreases with increasing NO concentration.

• 한국물환경학회지
• /
• 제21권1호
• /
• pp.84-91
• /
• 2005

$TiO_2-catalyst$ suspensions work efficiently in Photocatalytic oxidation (PCO) for wastewater treatment. Nevertheless, once photocatalysis is completed, separation of the catalyst from solution becomes the main problem. The PCO of Cu(II)-EDTA was studied to determine the reusability of the titanium dioxide catalyst. Aqueous solutions of $10^{-4}M$ Cu(II)-EDTA were treated using illuminated $TiO_2$ particles at pH 6 in a circulating reactor. $TiO_2$ was reused in PCO system for treatment of Cu(II)-EDTA comparing two procedures: reuse of water and $TiO_2$ and reuse of the entire suspension after PCO of Cu(II)-EDTA. The results are as follows; (i) Photocatalytic efficiency worsens with successive runs when catalyst and water are reused without separation and filtration, whereas, when $TiO_2$ is separated from water, the reused $TiO_2$ is not deactivated. (ii) The $TiO_2$ mean recovery (%) with reused $TiO_2$ was 86.4%(1.73g/L). Although the mean initial degradation rate of Cu(II)-EDTA and Cu(II) was lower than that using fresh $TiO_2$, there was no significant change in the rate during the course of the three-trial experiment. It is suggested that Cu(II)-EDTA could be effectively treated using an recycling procedure of PCO and catalyst recovery. (iii) However, without $TiO_2$ separation, the loss of efficiency of the PCO in the use of water and $TiO_2$ due to Cu(II), DOC remained from previous degradation and Cu(II)-EDTA added to the same suspension was observed after 2 trials, and resulted in the inhibition of the Cu(II)-EDTA, Cu(II) and DOC destruction.

• 공업화학
• /
• 제32권6호
• /
• pp.599-606
• /
• 2021

본 연구는 질소산화물 제거를 위하여 암모니아를 환원제로 사용하는 선택적 촉매 환원법에 있어 지지체에 셀레늄을 첨가하여 300 ℃ 이하에서 V₂O₅/WO₃/TiO₂의 반응 활성을 증진시키기 위한 실험 및 반응특성 연구를 수행하였다. 졸-겔법으로 Se-TiO₂ 및 TiO₂를 합성하였으며, 이를 지지체로 하여 V₂O₅/WO₃/TiO₂ 및 V₂O₅/WO₃/Se-TiO₂ 촉매를 제조하여 상용 촉매와 반응 활성을 비교하였다. 실험 결과, 졸-겔법으로 합성한 TiO₂를 사용한 촉매의 탈질 효율이 상용 TiO₂를 사용하여 제조한 촉매보다 낮은 결과를 보였으나 셀레늄을 첨가함에 따라 탈질 효율이 증진되었다. 따라서 BET, XRD, Raman, H₂-TPR 및 FT-IR분석을 통하여 셀레늄의 첨가가 촉매의 구조에 미치는 영향을 분석하였으며 셀레늄 첨가에 의한 비표면적의 증가와 단량체 및 복합체 바나듐 종의 형성이 반응 특성에 미치는 영향을 확인하였다.

• 한국환경과학회지
• /
• 제16권9호
• /
• pp.1077-1083
• /
• 2007

[ $V_2O_5/TiO_2$ ] catalyst impregnated ceramic candle filters are in principle, capable of performing shallow-bed dust filtration plus a catalytic reaction, promoted by a catalytic deposited in their inner structure. Pilot-scale $V_2O_5/TiO_2$ catalyst impregnated ceramic candle filters were prepared, characterized and tested for their activity towards the SCR reaction. The effect on NO conversion of operating temperature, gas hourly space velocity, amount of deposited catalyst, pressure drops and long-term experiment (life of catalytic filter) was determined. The following effects of $V_2O_5/TiO_2$ catalyst impregnated ceramic candle filters in SCR reaction are observed: (1) It increases the activity and widens the temperature window for SCR. (2) When the content of $V_2O_5$ catalyst increases further from 3 to 9wt.%, activity of NO increases. (3) NO conversion at first increases with temperature and then decreases at high temperatures (above $400^{\circ} over), possibly due to the occurrence of the ammonia oxidation reaction.