• 한국세라믹학회지
• /
• 제43권1호
• /
• pp.16-21
• /
• 2006

The preparation of $TiB_2$ by SHS in $B_2O_3-Mg-TiO_2$ system was investigated in this study. In the preparation of $TiB_2$, the effect on reactivity and reaction products of the initial pressure of inert gas in reactor, the content of Mg and $TiO_2$ in mixture was investigated. The minimum initial pressure of inert gas in reactor for SHS reaction in this system was 5atm, and as the pressure increased, the concentration of unreacted Mg decreased and combustion temperature increased. At the initial inert gas pressure in reactor of 50atm, the optimum composition for the preparation of pure $TiB_2$ was $B_2O_3+5Mg+TiO_2$. The $TiB_2$ synthesized in this condition had an irregular shape and the particle size of $1\~3{\mu}m$.

• 한국전기전자재료학회논문지
• /
• 제22권6호
• /
• pp.495-500
• /
• 2009

The ceramic($BaTiO_3$)-polymer(epoxy) composites have been widely investigated as dielectric materials for embedded capacitors in printed circuit boards (PCBs). The dielectric properties of $BaTiO_3$/epoxy composites prepared using the agglomerated $BaTiO_3$ particles were investigated in the present study. The dielectric constants of the composites prepared using the agglomerated $BaTiO_3$ particles were about 2 times higher than those of the composites with the dispersed $BaTiO_3$ particles. The insulation resistance of the composites prepared using the agglomerated $BaTiO_3$ particles were lower than those of the composites with dispersed $BaTiO_3$ particles. As a result, there is tradeoff between high dielectric constant and insulation resistance in the $BaTiO_3$/epoxy composites. So it is important to select proper agglomerated or dispersed $BaTiO_3$ particles in accordance with needs.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.53-54
• /
• 2006

Ti-Zr-Ni coatings deposited by low vacuum plasma spray technique consisted of nanometer-sized $W-Ti_{50}Zr_{35}Ni_{15}$ 1/1 cubic approximant and TiZrNi Laves phases as well as a low volume fraction of $ZrO_2$ phase. The shift of composition during deposition of the quasicrystalline powders and the presence of $ZrO_2$ phases are believed to be responsible for the reduced corrosion performances evaluated by means of electrochemical tests in a Hanks' Balance Salt Solution at $37^{\circ}C$.

• 한국세라믹학회지
• /
• 제23권2호
• /
• pp.21-30
• /
• 1986

Pure submicron $SrTiO_3$ powders had been synthesized with chemical wet process that $5N-NH_4OH$ solution was sprayed into the mixed solution of $SrTiO_3$, $TiCl_4$ and $H_2O_2$ with $N_2$ carrier gas. The characteristic properties of powders obtained from this experiment were as follows. The optimum synthesis condition in reaction bath was above PH 8.5 and under $25^{\circ}C$ The particle size of precipitated SrTiO(OH) powders dried at 6$0^{\circ}C$ was under 0.01${\mu}{\textrm}{m}$ and uniform. Amorphous precipitated complex powders emitted adsorbed water at 15$0^{\circ}C$ less that and crystalline $SrTiO_3$powders was produced from calcining the complex at 30$0^{\circ}C$. Sintered body of SrTiO3 fired at 133$0^{\circ}C$ showed that relative dielectric constant was 228 at 1MHZ and bulk density was 4.73g/$cm^3$.

• 공업화학
• /
• 제7권4호
• /
• pp.750-756
• /
• 1996

$TiO_2$ 고정화 물질은 Titanium tetraisopropoxide-isopropanol 용액에 제오라이트와 glass filter를 담지한 후, 이것을 공기중에 건조시켜 $500^{\circ}C$에서 소결하여 얻었다. Chlorothalnoil의 분석은 ECD가 부착된 가스크로마토그래피로 분석하였다. Chlorothalnoil에 대한 분해효율은 $TiO_2$로 지지된 광촉매가 효과적이었고, 3시간 후 완전히 분해되었다. 반응 생성물들은 $TiO_2$로 지지된 제오라이트에서는 $Cl^-$가 5.0ppm, $TiO_2$로 지지된 glass filter에서는 $Cl^-$가 7.5ppm,그리고 $TiO_2$ 분말에서는 $Cl^-$가 2.0ppm 각각 생성되었다. 그러나, $CN^-$는 지지체의 종류에 관계없이 검출한계이하였다.

• 한국세라믹학회지
• /
• 제35권10호
• /
• pp.1061-1069
• /
• 1998

The thermal instability of Al2TiO5 Ceramics was contrlled by solid solution with MgO SiO2 and ZrO2 through electrofusion in an arc furnace. The thermal expansion properties of Al2TiO5 composites show the hysteresis due to the strong anisotropy of The crystal axes of these material. These phenomena are ex-plained by the opening and closing of microcracks. The difference in microcracking temperatures e.g 587.6(ATG2), 405.9(ATG3) and 519.7$^{\circ}C$(ATG4) is caused by the difference in grain size and stabilizer type. The thermal shock behaviour under cyclic conditions between 750-1400-75$0^{\circ}C$ show no change in mi-crostructure and phase assemblage for all three stabilized specimens. After the thermal loading test at 110$0^{\circ}C$ for 100hrs. ATG1 and ATG2 materials decomposes completely to its components corundum and ru-tile in both cases. However with approximatelly 20% retention of the Al2TiO5 Thus in order to prevent decomposition of the stabilized material in the critical temperature range 800-130$0^{\circ}C$ it must be traversed within a short period of time.

• 한국분말재료학회지
• /
• 제22권6호
• /
• pp.396-402
• /
• 2015

The organic binder-free paste for dye-sensitized solar cell (DSSC) has been investigated using peroxo titanium complex. The crystal structure of $TiO_2$ nanoparticles, morphology of $TiO_2$ film and electrical properties are analyzed by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Electrochemical Impedance Spectra (EIS), and solar simulator. The synthesized $TiO_2$ nanopowders by the peroxo titanium complex at 150, 300, $400^{\circ}C$, and $450^{\circ}C$ have anatase phase and average crystal sizes are calculated to be 4.2, 13.7, 16.9, and 20.9 nm, respectively. The DSSC prepared by the peroxo titanium complex binder have higher $V_{oc}$ and lower $J_{sc}$ values than that of the organic binder. It can be attributed to improvement of sintering properties of $TCO/TiO_2$ and $TiO_2/TiO_2$ interface and to formation of agglomerate by the nanoparticles. As a result, we have investigated the organic binder-free paste and 3.178% conversion efficiency of the DSSC at $450^{\circ}C$.

• Korean Chemical Engineering Research
• /
• 제56권2호
• /
• pp.156-161
• /
• 2018

염소법과 졸-겔법으로 $TiO_2$ 광촉매 분말을 제조하였다. 제조방법 및 조건에 따라 촉매의 결정상 형태(아나타제와 루타일)와 비표면적이 변화하는 것을 알 수 있었다. TTIP-sol로 제조한 광촉매가 염소법이나 TBOT-sol로 제조한 광촉매에 비해 methylene blue (MB) 분해 특성이 더 높았으며, 수용액상의 90% 이상의 MB를 제거할 수 있었다. 실험 결과를 통해 $TiO_2$ 광촉매는 단일 아나타제상와 큰 비표면적을 가지면 유기물 분해 특성을 향상될 수 있는 것을 확인하였다.

• 한국세라믹학회지
• /
• 제33권4호
• /
• pp.399-404
• /
• 1996

Hydrothemal synthesis of PbTiO3 has been investigated. A comprehensive thermodynamic model for heteroge-nous reacting solid-aquous system has been used to predict the optimum condition for the synthesis. Synthesis were performed using lead acetate trihydrate as Pb source crystalline TiO2 as Ti source and KOH as minerali-zer. The synthesis has been examined at low temperature (16$0^{\circ}C$) Phase pure perovskite PbTiO3 has been obtained at high pH(above 0.5 mol KOH). The morphology of PbTiO3 was acicular shape. It has been found sible for a distortion in the c direction. The water is gradully released on annealing the powder to 40$0^{\circ}C$ and the normal crystallographic properties are restored.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1998년도 춘계학술대회 및 발표대회 강연 및 발표논문 초록집
• /
• pp.6-6
• /
• 1998

In 1957, the first magnetic disk drive compatible with a movable head was introduced as an external file memory device for computer system. Since then, magnetic disks have been improved by increasing the recording density, which has brought about the development of a high performance thin film magnetic head. The thin film magnetic head has a magnetic circuit on a ceramic substrate using IC technology. The physical property of the substrate material is very important because it influences the tribology of head/disk interface and also manufacturing process of the head. $Al_{2}O_{3}$-TiC ceramics, so called ALTIC, is known to be one of the best substrate materials which satisfies this property requirement. Even though the head is not in direct contact with the disk, frequent instantaneous contacts are unavoidable due to its high rotating speed and the close gap between them. This may cause damage in the magnetic recording media and, thus, it is very important that the magnetic head has a good wear resistance. $Al_{2}O_{3}$-TiC ceramics has an excellent tribological property in head/disk interface. Manufacturing process of thin film head is similar to that of IC, which requires extremely smooth and flat surface of the substrate. The substrate must be readily sliced into the heads without chipping. $Al_{2}O_{3}$-TiC ceramics has excellent machineability and mechanical properties. $Al_{2}O_{3}$-TiC ceramics was first developed at Nippon Tungsten Co. as cutting tool materials in 1968, which was further developed to be used as the substrate materials for thin film head in collaboration with Sumitomo Special Metals Co., Ltd. in 1981. Today, we supply more than 60% of the substrates for thin film head market in the world. In this paper, we would like to present the sintering process of $Al_{2}O_{3}$-TiC ceramics and its property in detail.