• 제목/요약/키워드: TiO2 분말

검색결과 565건 처리시간 0.022초

Quinacridone을 첨가시킨 SnO2가 도핑된 TiO2 분말의 광촉매 특성 (Photoactivity of SnO2-Doped TiO2 Powder Sensitized with Quinacridone)

  • 정미원;곽윤정
    • 공업화학
    • /
    • 제18권6호
    • /
    • pp.650-653
    • /
    • 2007
  • $SnO_2$가 도핑된 $TiO_2$ 분말을 tin (IV) bis(acetylacetonate) dichloride와 titanium diisopropoxide bis(acetylacetonate)를 출발물질로, 유기염료인 quinacridone을 첨가하여 합성하였다. 반응 전후 염료의 구조를 FT-IR로 관찰하였고, 입자의 모양과 형태 및 결정의 구조는 FE-SEM과 XRD 분석기로 알아보았다. 환경오염물질로 유기염료인 indigo carmine을 선택하여 관찰한결과, 아나타제 구조를 갖는 quinacridone이 첨가된 분말을 합성하여, 가시광선 영역에서 광분해 효과를 관찰할 수 있었다.

고분자 첨가법에 의해 SnO2가 도핑된 TiO2 분말의 합성 및 광촉매 특성 (Synthesis and Photoactivity of SnO2 - Doped Anatase - Type TiO2 Powder Via Polymerization - Complex Route)

  • 정미원;곽윤정
    • 공업화학
    • /
    • 제17권5호
    • /
    • pp.561-564
    • /
    • 2006
  • $SnO_{2}$가 도핑된 아나타제형의 $TiO_{2}$ 분말을 tin (IV) bis (acetylacetonate) dichloride와 titanium diisopropoxide bis (acetyl- acetonate)를 출발물질로, polyethylene glycol (PEG)을 첨가하여 합성하였다. 반응과정에 대한 구조변화를 FT-IR로 추적하였고, 입자의 모양과 형태 및 결정의 구조는 FE-SEM과 XRD 분석기로 관찰하였다. 합성된 분말의 광촉매 효과는 환경오염물질로 indigo carmine (IC)을 선택하여 UV-visible 스펙트라로 관찰하였다.

칼슘 증기에 의한 Ti-48Al-2Cr-2Nb 분말의 산소 저감 및 표면 화학적 상태 분석 (Evaluation of Oxygen Reduction and Surface Chemical State of Ti-48Al-2Cr-2Nb Powder by Ca Vapor)

  • 김태헌;권한중;임재원
    • 한국분말재료학회지
    • /
    • 제28권1호
    • /
    • pp.31-37
    • /
    • 2021
  • This study explores reducing the oxygen content of a commercial Ti-48Al-2Cr-2Nb powder to less than 400 ppm by deoxidation in the solid state (DOSS) using Ca vapor, and investigates the effect of Ca vapor on the surface chemical state. As the deoxidation temperature increases, the oxygen concentration of the Ti-48Al-2Cr-2Nb powder decreases, achieving a low value of 745 ppm at 1100℃. When the deoxidation time is increased to 2 h, the oxygen concentration decreases to 320ppm at 1100℃, and the oxygen reduction rate is approximately 78% compared to that of the raw material. The deoxidized Ti-48Al-2Cr-2nb powder maintains a spherical shape, but the surface shape changes slightly owing to the reaction of Ca and Al. The oxidation state of Ti and Al on the surface of the Ti-48Al-2Cr-2Nb powder corresponds to a mixture of TiO2 and Al2O3. As a result, the peaks of metallic Ti and Ti suboxide intensify as TiO2 and Al2O3 in the surface oxide layer are reduced by Ca vapor deposition.

수열합성 법에 의한 $BaTiO_3$ 분말제조 및 방전 플라즈마 소결 (Characterization of Hydrothermally Synthesized $BaTiO_3$ Powder and Spark Plasma Sintering(SPS))

  • 이정수;이완재
    • 한국분말재료학회지
    • /
    • 제8권1호
    • /
    • pp.35-41
    • /
    • 2001
  • $BaTiO_3$ fine powder was synthesized by hydrothermal process from the mixture of titania-hydroxide($TiO_2{\cdot}xH_2O$) and barium hexa-hydroxide ($Ba(OH)_2{\cdot}8H_2O$) as starting materials. Fine powder(< 100 nm) was made under the reaction conditions of 18$0^{\circ}C$,10 atm, 1.5 hr in autoclave and showed cubic structure. The powders were sintered by a spark plasma sintering technique from 1050~115$0^{\circ}C$ for 5 min. The grains of sample sintered at 110$0^{\circ}C$ were about 0.9${\mu}m$ in average size and showed the mixture of cubic and tetragonal structures.

  • PDF

수열합성법에 의한 BaTiO$_3$ 제조 - 농도변화에 따른 결정성 평가 (Study of Preparation of BaTiO$_3$ Powder using Hydrothermal methods - Estimation of Crystallization with Concentrations)

  • 남성찬;최정묵;박정훈;김종기;박상도;김홍국
    • 한국에너지공학회:학술대회논문집
    • /
    • 한국에너지공학회 2002년도 추계 학술발표회 논문집
    • /
    • pp.165-169
    • /
    • 2002
  • BaTiO$_3$ 분말을 Ba(OH)$_2$ㆍ8$H_2O$와 아나타제형의 TiO$_2$$\chi$$H_2O$를 이용하여 광화제 첨가 없이 열수처리에 의한 탈수(dehydration) 및 재결정화(recrystallization) 과정을 통한 수열합성법에 의해 제조하였다. Autoclave 반응기를 이용한 실험의 경우, BaTiO$_3$ 분말을 생성하기 위한 최적 반응온도 및 시간은 각각 21$0^{\circ}C$, 4시간으로 확인되었으며, 이 때 생성된 BaTiO$_3$ 분말의 크기는 0.1~0.2$mu extrm{m}$로 입도분포가 양호하였다. 그리고, 바륨과 티타늄의 농도비가 증가됨에 따라 결정화도(tetragonality)가 증가하는 경향을 나타내고 있다. 이는 반응하지 않고 남아 있는 바륨의 영향으로 생각되며, 이는 반응물의 pH와도 관련이 있다. 또한, 반응온도 및 시간도 결정화도에 커다란 영향을 미치는 변수로 주로 반응온도 및 시간이 증가함에 따라 결정화도도 함께 증가하는 추세를 나타내고 있다.

  • PDF