• 한국재료학회지
• /
• 제9권1호
• /
• pp.57-64
• /
• 1999

The electrical conductivity of TiO$_2$ doped with 0.05~1.5mol% WO$_3$ was measured in the oxygen partial pressure range of 10\ulcorner~10\ulcorner atm and temperature range of 1100~130$0^{\circ}C$ to investigate the defect types and the electrical properties. The grain size and density were increased as the liquid phase was formed by the doped WO$_3$. The secondary phase and WO$_3$peaks at the sample doped up to 4.0 mol% were not detected from the XRD results. The data(log$\sigma$/logPo$_2$) over 110$0^{\circ}C$ were divided into the four regions. From these experimental results, we proposed the following defect regions. 1) Magneli phase(extended defect), 2) Reduced rutile region which is similar to the behavior of undoped rutile, 3) Nearly stoichiometric Ti\ulcornerW\ulcornerO$_2$region in which extra charge of W\ulcorner cation is expected to be compensated by an electron, 4) Overstoichiometric Ti\ulcornerW\ulcornerO\ulcorner region which is a metal deficiency not to be observed in pure TiO$_2$. The electrical conductivity of w-doped TiO$_2$ was influenced by the measuring temperature, oxygen partial pressure, and the dopig content.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권4호
• /
• pp.379-384
• /
• 1996

The microwave dielectric properties of (I-x)CaTiO$_{3}$-xLaAIO$_{3}$ were investigated. The solid solution of (1-x)CaTiO$_{3}$-xLaAIO$_{3}$ had the perovskite structure in the range of all compositions. The crystal system of (1-x)CaTiO$_{3}$-xLaAIO$_{3}$ was transformed to orthorhombic(x.leq.0.4), psudo-cubic(x=0.5), and rhombohedral (x.geq.0.7) in turn, as the amount of LaAIO$_{3}$ increased. The dielectric constant and temperature coefficient of resonant frequency of solid solution were decreased with the content of LaAIO$_{3}$, whereas, the value of Q . f$_{o}$ was increased. The microwave dielectric material having Q . f$_{o}$ = 32, 500, .epsilon.$_{r}$ = 42, and .tau.$_{f}$ = 5 ppm/.deg. C was obtained from the 0.35CaTiO$_{3}$-0.65LaAIO$_{3}$ composition sintered at 1600.deg. C for 4hrs.hrs.hrs.

• 한국주조공학회지
• /
• 제14권3호
• /
• pp.240-247
• /
• 1994

TiC particulate reinforced magnesium matrix composites were fabricated by melt stirring method. The effect of alloying elements on TiC particulate dispersion into molten magnesium and mechanical properties were investigated. The incorporation time is defined as the time required for dispersion of solid particles into molten metal. The incorporation time of TiC particles into molten pure magnesium was remarkably shorter and the particulated dispersion was more uniform than that of pure aluminum which was reported previously. The incorporation time was, prolonged by the addition of Al, Bi, Ca, Ce, Pb, Sn or Zn. The tensile strength increased and elongation decreased by the addition of Cu or Sn into the matrices and composites. Although, the tensile strength of the matrices and composites increased by alloying with Ca or Ce, the maximum elongation was observed at a content of about 1% for the matrices. By alloying with Zn, the tensile strength increased for the matrices and composites, but the elongation of the matrices increased. The pure magnesium and its alloy matrix composites reinforced with 20vol% TiC have the tensile strength of about 400MPa. This value is compared with the tensile strength of SiC whisker reinforced magnesium matrix composites fabricated by liquid infiltration method at the same volume fraction. There fore, the melt strirring method which has the advantages of simple process is considered to be efficient in fabricating magnesium matrix composites.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권8호
• /
• pp.894-900
• /
• 2006

The electrical characteristics associated with crystal structure changes as a function of La content for $(Pb_{1-x}La_x)(Zr_{0.5}Ti_{0.5})O_3$ thin films were investigated for applications in memory capacitors. Tetragonality of PLZT films decreased with increasing La content. Thin films with La $\geq$ 20 mol% were found to be cubic. Films with La $\geq$ 12 mol% exhibited broader dielectric peaks compared to those of bulk ceramics and behaved as relaxer ferroelectrics. Tetragonal PLZT film with 12 mol% La had a dielectric constant maximum of 1330 at room temperature and a charge storage density of ${\sim}18{\mu}C/cm^2$ at 5 V. Decrease in coercive field and remnant polarization with increase in La content were resulting from less dipolar response caused by the decreased crystal anisotropy. The leakage current densities $<10^{-8}A/cm^2$ up to 5 V bias voltage were observed for the films with La $\geq$ 14 mol%.

• Tribology and Lubricants
• /
• 제23권6호
• /
• pp.261-265
• /
• 2007

Carbide-derived carbon coating has been synthesized by low temperature treatment of TiC disk with $H_2/Cl_2$ mixture gases. A variety of physical measurements indicated that Ti was extracted and carbon layer was formed by exposure of $Cl_2$ gas. The $I_D/I_G$ ratio increased with increasing $Cl_2$ gas concentration. Wear coefficient and frictional coefficient varied with $Cl_2$ gas concentration. When the $Cl_2$ gas concentration decreased to 3.3 vol%, the friction coefficient approach a minimum. The results showed that degree of graphite crystallinity and variation of porosity due to the $Cl_2$ gas content were responsible for different tribology performance.

• 한국재료학회지
• /
• 제18권2호
• /
• pp.107-111
• /
• 2008

[ $BaO{\cdot}Nd_2O_3{\cdot}5TiO_2$ ] (BNT) ceramics modified with a borate glass containing Ba, Nd and Ti as glass constituents were investigated with regard to their sintering behavior and microwave dielectric properties. An addition of iso-component glass significantly improved the sinterabilty of the BNT ceramics and lowered the sintering temperature. A maximum density of $5.29\;g/cm^3$ and an x-y shrinkage of 17% were obtained for BNT ceramics containing 10wt.% of the glass sintered at $1100^{\circ}C$. The dielectric composition without the glass additive was only slightly densified at $1100^{\circ}C$. The resulting sample exhibited two crystalline phases, $BaNd_2Ti_5O_{14}$ and $Ba_2Ti_9O_{20}$, regardless of sintering temperature and glass content. When >10wt.% glass was added, exaggerated grain growth with a less uniform microstructure was found, resulting in the subsequent reduction of the fired density and the dielectric properties. BNT ceramics containing 10wt.% of the isocomponent glass sintered at $1100^{\circ}C$ for 4 h showed promising dielectric properties of k = 71.3 and Q = 1,330.

• 한국진공학회지
• /
• 제10권2호
• /
• pp.234-240
• /
• 2001

본 연구에서는 Mg을 첨가한 Cu-alloy에 의해 TiN의 확산방지능력을 향상시키고자 하였다. Cu(Mg) 박막은 대기노출시킨 TiN박막위에 증착되었으며 열처리시 Cu 박막내의 Mg은 TiN의 표면에 있는 산소와 반응하여 매우 얇은(~100 $\AA$) MgO를 형성하게되고 MgO에 의해 TiN의 확산방지능력은 Cu(4.5 at.%Mg)의 경우 $800^{\circ}C$까지 향상됨을 알 수 있었다. 그러나 Cu(Mg) a]toy는 TiN위에서 접착특성이 좋지 않기 때문에 TiN을 $O_2$plasma 처리하였으며 $O_2$ plasma 처리후 $300^{\circ}C$ 진공열처리를 통해 접착력이 크게 향상되는 것을 알 수 있었다. 이는 $O_2$ plasma 처리에 의해 TiN표면에 Mg과 반응할 수 있는 산소의 양이 증가하는 데 기인하며 이에 따라 Mg의 계면이동이 크게 증가되어 치밀한 MgO가 형성됨을 확인하였다. 그리고 $O_2$ plasma 처리시 RF power를 증가시키면 계면으로 이동하는 Mg의 양이 오히려 감소하였고 이것은 TiN의 표면이 $TiO_2$로 변하여 Mg과 결합할 수 있는 산소의 양이 상대적으로 감소하였기 때문인 것으로 생각된다. 또한 접착층으로서 Si을 50$\AA$ 증착하여 접착력을 크게 향상시켰으며 Si 증착에 의한 TiN의 확산방지능력은 감소되지 않는 것을 알 수 있었다.

• 공학논문집
• /
• 제6권2호
• /
• pp.23-32
• /
• 2004

현재까지 사용되어가지고 있는 임플란트 재료 중 commercially pure titanium (순수티탄; Cp-Ti)과 Ti-alloy들은 생체재료로 폭넓게 사용되어지고 있는데, Ti 금속들은 경도가 강하고 점도가 높기 때문에, 치과나 정형외과 등의 하중에 잘 견디는 곳에 이용되어지고 있다고 한다. 이것들은 생체적합성과 부식에 대한 저항성도 좋은 것으로 알려져 있다. 일반적으로 Ti은 4종류의 Grade로 강도의 차이에 의하여 분류되고 Ti의 강도에 영향을 미치는 것으로는 산소, 철, 질소등이 있다. 따라서 본 연구에서는 O와 Fe의 함량을 달리한 Ti alloy시편을 사용하여 생체적합성 실험을 하였다. 먼저 실험은 시편을 micropolishing하고 5M NaOH에서 $60^{\circ}C$에서24시간 처리하여서 비표면적을 넓혔으며, 표면의 $TiO_2$을 만들어주기 위하여 $600^{\circ}C$에서 열처리하였다. 그런 시편을 $36.5^{\circ}C$의 SBF에 넣어 1~14일까지 침적한 후에 표면에 형성된 apatite를 SEM과 EDAX로 조사하였다. 조사 결과 모든 시편에서 apatite가 생성되었지만, 시편의 조성에 따라서 apatite의 형성양이 다름을 확인하였다.

• The Korean Journal of Ceramics
• /
• 제6권2호
• /
• pp.91-95
• /
• 2000

Powder mixtures of $\beta$-SiC-TiC in a weight ratio of 2:1 containing 5-20 wt% additives ($Al_2O_3$-$Y_2O_3$) were liquid-phase sintered at $1830^{\circ}C$ for 1h by hot-pressing and subsequently annealed at $1950^{\circ}C$ for 6h to enhance grain growth. The annealed specimens revealed a microstructure of \"in situ-toughened composite\" as a result of the $\beta$longrightarrow$\alpha$ phase transformation of SiC during annealing. The increase of the content of additives accelerated the growth of elongated $\alpha$-SiC grains with higher aspect ratio and improved fracture toughness. The fracture toughness of SiC-TiC composite containing 20 wt% additive was 6.2 MPa.$m^{1/2}$.2}$.

• 한국세라믹학회지
• /
• 제40권7호
• /
• pp.637-643
• /
• 2003

PDP(Plasma Display Panel)용 녹색 형광체의 발광특성과 결정성을 향상시키기 위해 Zn$_2$SiO$_4$:Mn에 co-dopant로 Cr과 Ti 를 각각 첨가하여 졸-겔법으로 합성하였다. 이렇게 합성된 Zn$_2$SiO$_4$:Mn, M(M=Cr, Ti) 형광체는 고상반응의 경우와 비교하여 상대적으로 낮은 온도인 110$0^{\circ}C$에서 willemite 구조의 단일상이 형성되었다. 제조된 Zn$_2$SiO$_4$:Mn, M(M=Cr, Ti) 형광체에 대하여 진공자외선(Vacuum Ultraviolet, VUV) 영역의 147 nm 여기광원을 사용하여 발광특성을 조사하였다. Co-dopant의 영향을 알아보기 위해 Mn의 농도는 2 ㏖%, $H_2O$/TEOS의 비율은 36.1로 고정하였고, 이때 Cr과 Ti 모두 0.1 ㏖%에서 가장 좋은 발광특성을 나타냈다. Cr이 co-doping된 경우는 농도가 증가할수록 잔광시간은 짧아지나 발광강도는 지속적으로 감소한 반면, Ti를 co-doping했을 때는 오히려 낮은 농도에서 발광강도의 증가를 보이며 2.0 ㏖%에서 급격히 감소하였다.