• 제목/요약/키워드: Ti-capped NiSi

검색결과 6건 처리시간 0.046초

Ti-capped NiSi 형성 및 열적안정성에 관한 연구 (A Study on the Formation of Ti-capped NiSi and it′s Thermal Stability)

  • 박수진;이근우;김주연;배규식
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 하계학술대회 논문집
    • /
    • pp.288-291
    • /
    • 2002
  • Application of metal silicides such as TiSi$_2$ and CoSi$_2$ as contacts and gate electrodes are being studied. However, TiSi$_2$ due to the linewidth-dependance, and CoSi$_2$ due to the excessive Si consumption during silicidation cannot be applied to the deep-submicron MOSFET device. NiSi shows no such problems and can be formed at the low temperature. But, NiSi shows thermal instability. In this investigation, NiSi was formed with a Ti-capping layer to improve the thermal stability. Ni and Ti films were deposited by the thermal evaporator. The samples were then annealed in the N$_2$ ambient at 300-800$^{\circ}C$ in a RTA (rapid thermal annealing) system. Four point probe, FESEM, and AES were used to study the thermal properties of Ti-capped NiSi layers. The Ti-capped NiSi was stable up to 700$^{\circ}C$ for 100 sec. RTA, while the uncapped NiSi layers showed high sheet resistance after 600$^{\circ}C$. The AES results revealed that the Ni diffusion further into the Si substrate was retarded by the capping layer, resulting in the suppression of agglomeration of NiSi films.

  • PDF

Ti-capped Ni monosilicide의 열적 안정성에 관한 연구 (The Study on Thermal Stability of Ti-Capped Ni Monosilicide)

  • 이근우;유정주;배규식
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
    • /
    • pp.106-106
    • /
    • 2003
  • 반도체 소자의 고집적화에 따라 채널길이와 배선선 폭은 점차 줄어들고, 이에 따라 단채널효과, 소스/드레인에서의 기생저항 증가 및 게이트에서의 RC 시간지연 증가 등의 문제가 야기되었다. 이를 해결하기 위하여 자기정렬 실리사이드화(SADS) 공정을 통해 TiSi2, CoSi2 같은 금속 실리사이드를 접촉 및 게이트 전극으로 사용하려는 노력이 진행되고 있다. 그런데 TiSi2는 면저항의 선폭의존성 때문에, 그리고 CoSi2는 실리사이드 형성시 과도한 Si소모로 인해 차세대 MOSFET소자에 적용하기에는 한계가 있다. 반면, NiSi는 이러한 문제점을 나타내지 않고 저온 공정이 가능한 재료이다. 그러나, NiSi는 실리사이드 형성시 NiSi/Si 계면의 산화와 거침성(roughness) 때문에 높은 누설 전류와 면저항값, 그리고 열적 불안정성을 나타낸다. 한편, 초고집적 소자의 배선재료로는 비저항이 낮고 electro- 및 stress-migration에 대한 저항성이 높은 Cu가 사용될 전망이다. 그러나, Cu는 Si, SiO2, 실리사이드로 확산·반응하여 소자의 열적, 전기적, 기계적 특성을 저하시킨다. 따라서 Cu를 배선재료로 사용하기 위해서는 확산방지막이 필요하며, 확산방지재료로는 Ti, TiN, Ta, TaN 등이 많이 연구되고 있다.

  • PDF

Cu/Ti-cappng/NiSi 전극구조 p+/n 접합의 전기적 특성 (Electrical Characteristics of p+/n Junctions with Cu/Ti-capping/NiSi Electrode)

  • 이근우;김주연;배규식
    • 한국재료학회지
    • /
    • 제15권5호
    • /
    • pp.318-322
    • /
    • 2005
  • Ti-capped NiSi contacts were formed on $p^+/n$ junctions to improve the leakage problem and then Cu was deposited without removing the Ti-capping layer in an attempt to utilize as a diffusion barrier. The electrical characteristics of these $p^+/n$ diodes with Cu/Ti/NiSi electrodes were measured as a function of drive-in RTA(rapid-thermal annealing) and silicidation temperature and time. When drive-in annealed at $900^{\circ}C$, 10 sec. and silicided at $500^{\circ}C$, 100 sec., the diodes showed the most excellent I-V characteristics. Especially, the leakage current was $10^{-10}A$, much lower than reported data for diodes with NiSi contacts. However, when the $p^+/n$ diodes with Cu/Ti/NiSi contacts were furnace-annealed at $400^{\circ}C$ for 40 min., the leakage current increased by 4 orders. The FESEM and AES analysis revealed that the Ti-capping layer effectively prohibited the Cu diffusion, but was ineffective against the NiSi dissociation and consequent Ni diffusion.

Ti-capping층이 NiSi의 열적안정성에 미치는 영향 (Effects of Ti-capping Layers on the Thermal Stability of NiSi)

  • 박수진;이근우;김주연;전형탁;배규식
    • 한국재료학회지
    • /
    • 제13권7호
    • /
    • pp.460-464
    • /
    • 2003
  • Ni and Ti films were deposited by the thermal evaporator, and then annealed in the N$_2$ ambient at 300-80$0^{\circ}C$ in a RTA(rapid thermal annealing) system. Four point probe, AEM, FESEM, AES, and XPS were used to study the effects of Ti-capping layers on the thermal stability of NiSi thin films. The Ti-capped NiSi was stable up to $700^{\circ}C$ for 100 sec. RTA, while the uncapped NiSi layers showed high sheet resistance after $600^{\circ}C$. These results were due to that the Ni in-diffusion and Si out-diffusion were retarded by the capping layer, resulting in the suppression of the formation of NiSi$_2$and Si grains at the surface.