• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.260-261
• /
• 2014

$TiO_2$ nanotubes (TNT) synthesized by microwave-assisted hydrothermal method by using $TiO_2-P25$ as a precursor at hydrothermal temperature $150^{\circ}C$ in 4 hours. The concentration of alkaline solution is between 4M and 10M. Samples were characterized by X-ray diffraction (XRD), Raman spectroscopy (RS), Transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) and UV-vis DRS spectroscopy. The results demonstrated the effects of the alkali concentration to the formation of nanotubes. The photocatalytic activity was investigated by degradation of Methylene Blue (MB).

• The Korean Journal of Ceramics
• /
• v.3 no.3
• /
• pp.191-194
• /
• 1997

Epitaxial Pb(Zr, Ti)O3(PZT) thin films were prepared on MgO(100) substrates by dipping-pyrolysis (DP) process using metal naphthenates as starting materials, and effects of pyrolysis and final heat-treatment conditions on the film's orientation were investigated. Solid-state epitaxial growth of PZT proceeds at lower temperature around 650℃ from the precursor pyrolyzed at 350 and 500℃. The in-plane alignment of the PZT films depends not only on the final heat-treatment temperature but on the pyrolysis conditions; the films, pyrolyzed at a higher temperature for a short time, i.e., at 500℃ for 10 min, exhibited stronger orientation after the same final heat treatment at 650°∼750℃. The PZT films with the strongest orientation were prepared by pyrolysis under the above conditions followed by final heat treatment at 750℃.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.110-110
• /
• 2000

Sol-Gel법은 산화물 전구체(precursor) 상태인 Sol상태로부터 가수분해, 중, 축합반응을 거쳐 최종적으로 Gel 산화물을 합성하는 방법이며 기존의 세라믹스를 합성할 수 있고 고순도의 균질한 화합물을 용이하게 얻을 수 있는 특징이 있다. 최근 전자부품이 소형, 경량화되는 추세에 따라 전자 세라믹스분야에서도 박막화가 대두되고 있는 가운데 Sol-Gel법은 dipping, spining 및 spray 법등을 이용하여 박막의 제작이 가능하며 CVD, PVD, sputtering 법등과 같은 박막제작에 비하여 장비가 복잡하지 않으면서 제작기법이 간단한 이점을 가지고 있다. 소재면에서 볼 때 TiO2 물질은 물리적, 화학적으로 안정하고 굴절율, 착샐율 및 반사율 등이 우수한 재료로서 세라믹스 콘센서, 압전소자, 습도센서와 가스센서분야등에 있어서 중요한 위치를 점하고 있어서 연구자들에게 많은 관심을 가지게 하였다. 본 연구에서는 Sol-Gel법에 의해 TiO2 Sol을 합성한 후 dipping 법으로 박막을 제작하고 박막의 전기전도 특성 및 습도센서소재로의 개발을 위해 습도감지특성에 주목하였고 경시변화로 인해 생성된 Gel powder의 물성에 대해서도 검토하였다.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.38-42
• /
• 1993

Factor analysis was applied to study the thermal decomposition of barium titanyl oxalate (BTO) which is used as the precursor of barium titanate. BTO was synthesized in $H_2O$ solvent and calcined at various temperatures. The X-ray diffraction patterns were obtained to make the data matrix of peak intensity vs. 2${\theta}$. Abstract factor analysis and target transformation factor analysis were applied to this data matrix. It has been found that the synthesized BTO consists of the crystals of $BaC_2O_4{\cdot}0.5H_2O\;and\;BaC_2O_4{\cdot}2H_2O$ as well as the amorphous solid of TiO-oxalate. The results also indicate that the BTO was transformed via $BaCO_3\;to\;BaTiO_3\;and\;Ba_2TiO_4$ during the thermal decomposition.

• Particle and aerosol research
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2009

Fe- and V-doped titanium dioxide nanoparticles consisting of spherical primary nanoparticles were synthesized from a mixed liquid precursor by using the flame spray pyrolysis. The effects of dopant concentration on the powder properties such as morphology, crystal structure, and light adsorption were analyzed by TEM, XRD, and UV-Vis spectrophotometer, respectively. As the V/Ti molar ratio increased, pure anatase particles were synthesized. On the contrary, rutile phase particles were synthesized as the Fe/Ti ratio increased. Photocatalytic property of as-prepared $TiO_2:Fe,V$ nanoparticles was investigated by measuring the removal efficiency for volatile organic compounds (VOCs) under the irradiation of visible light. After 2 hrs under visible light, the removal efficiencies of benzene, p-xylene, ethylbenzene, and toluene were reached to 21.9%, 21.4%, 19.8% and 17.6% respectively.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.6
• /
• pp.627-634
• /
• 2017

In this study, Material life cycle evaluation was performed to analyze the environmental impact characteristics of TiN-ZrCo membrane manufacturting process. Gabi was used as software. The Eco-Indicator 99 methodology was used to evaluate the 11 impact categories and the 10 impact categories using the CML 2001 methodology. Precursor TiN was synthesized by sol-gel method and zirconium was coated by ball mill method. The metallurgical, physical and thermodynamic characteristics of the membranes were analyzed by using Scanning Electron Microscope (SEM), Energy Dispersive X-ray (EDS), X-ray Diffraction (XRD), Thermo Gravimetry/Differential Thermal Analysis (TG/DTA), Brunauer, Emmett, Teller (BET) and Gas Chromatograph System (GP). As a result of the characterization and normalization, the environmental impacts of each category of impacts were GWP 100 years with the highest environmental impact of 99.9%.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3362-3366
• /
• 2013

A simple and quick separation technique for selenite in natural water was developed using $TiO_2$@$SiO_2/Fe_3O_4$ nanoparticles. For the synthesis of nanoparticles, a polymer-assisted sol-gel method using hydroxypropyl cellulose (HPC) was developed to control particle dispersion in the synthetic procedure. In addition, titanium butoxide (TBT) precursor, instead of the typical titanium tetra isopropoxide, was used for the formation of the $TiO_2$ shell. The synthesized nanoparticles were used to separate selenite ($Se^{4+}$) in the presence of $Se^{6+}$ or selenium anions for the photocatalytic reduction to $Se^0$ atom on the $TiO_2$ shell, followed by magnetic separation using $Fe_3O_4$ nanoparticles. The reduction efficiency of the photocatalytic reaction was 81.4% at a UV power of 6W for 3 h with a dark adsorption of 17.5% to the nanoparticles, as determined by inductively coupled plasma-mass spectrometry (ICP-MS). The developed separation method can be used for the speciation and preconcentration of selenium cations in environmental and biological analysis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.8
• /
• pp.608-613
• /
• 2013

In this paper, the low-temperature sintering of $TiO_2$ is approached to solve the problem of high temperature sintering which decreases the interconnection between particles or between substrate and particle. $TiO_2$ paste is prepared with Titanium (IV) isopropoxide as the precursor material and calcinate at different conditions (low temperature). In the results, since the changing of temperature and time of sintering, crystalline phase do not change and the intensities of anatase, rutile phase are higher. At $110^{\circ}C$, 7 h sintering condition, crystalline size of anatase and rutile phase are the smallest which are 13.07 and 17.47 nm, respectively. In addition, the highest zeta potential is about 32.77 mV and the repulsive force increases thus leading to the best of the dispersion characteristics between $TiO_2$ particles. Futhermore, DSSCs at that condition exhibits the highest efficiency with the values of $V_{oc}$, $J_{sc}$, FF and ${\eta}$ are 0.69 V, $8.60mA\;cm^{-2}$, 67.93% and 4.06%, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.1015-1020
• /
• 2007

A simple approach to prepare arrays of Au/TiO2 composite nanoparticles by using Au-loaded block copolymers as templates combined with a sol-gel process is described. The organic-inorganic hybrid films with closely packed inorganic nanodomains in organic matrix are produced by spin coating the mixtures of polystyrene-block-poly(ethylene oxide) (PS-b-PEO)/HAuCl4 solution and sol-gel precursor solution. After removal of the organic matrix with deep UV irradiation, arrays of Au/TiO2 composite nanoparticles with different compositions or particle sizes can be easily produced. Different photoluminescence (PL) emission spectra from an organic-inorganic hybrid film and arrays of Au/TiO2 composite nanoparticles indicate that TiO2 and Au components exist as separate state in the initial hybrid film and form composite nanoparticles after the removal of the block copolymer matrix.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1515-1519
• /
• 2005

Tungsten oxide-modified TiO2 thin films were formed on a glass substrate by sol-gel and dip coating processes using acetyl acetone as a chelating agent. The hydrophilic properties of the thin films were investigated with illumination of UV light. The dependence of water contact angle on material composition and morphology of the film is established with SEM image and AFM profile. The surface morphology was controlled with the change of precursor concentration. 0.01 M of tungsten oxide-modified Ti$O_2$ have shown the highest hydrophilicity after UV-irradiation. The effect of composition on photoinduced hydrophilicity of the W$O_3$-Ti$O_2$ films was also investigated. The films were characterized by XRD, SEM, AFM and XPS.