• 제목/요약/키워드: Ti 전극

검색결과 650건 처리시간 0.022초

전극함몰형 실리콘 태양전지의 제작시 스프레이 방법에 의한 타이타늄 옥사이드층의 적용에 관한 연구 (Titanium dioxide by spray deposition for buried contact silicon solar cells fabrication)

  • A.U. Ebong;S.H. Lee
    • 한국결정성장학회지
    • /
    • 제6권2호
    • /
    • pp.263-274
    • /
    • 1996
  • 타이타늄 옥사이드층을 태양전지의 표면 보호막으로 사용시, 그 적합성에 대해 조사하였다. 스프레이법으로 형성된 타이타늄 옥사이드의 박막층은 태양전지 제조 과정중 사용되는 화학약품에 잘 견디며, 이 층을 사용함으로서 고온산화공정을 줄일 수 있다.

  • PDF

IrO2 기반 수처리용 산화 전극의 표면 이종 접합 구성에 따른 활성 염소종 발생 증진 특성 연구 (A study on reactive chlorine species generation enhanced by heterojunction structures on surface of IrO2-based anodes for water treatment)

  • 홍석화;조강우
    • 상하수도학회지
    • /
    • 제32권4호
    • /
    • pp.349-355
    • /
    • 2018
  • This study interrogated multi-layer heterojunction anodes were interrogated for potential applications to water treatment. The multi-layer anodes with outer layers of $SnO_2/Bi_2O_3$ and/or $TiO_2/Bi_2O_3$ onto $IrO_2/Ta_2O_5$ electrodes were prepared by thermal decomposition and characterized in terms of reactive chlorine species (RCS) generation in 50 mM NaCl solutions. The $IrO_2/Ta_2O_5$ layer on Ti substrate (Anode 1) primarily served as an electron shuttle. The current efficiency (CE) and energy efficiency (EE) for RCS generation were significantly enhanced by the further coating of $SnO_2/Bi_2O_3$ (Anode 2) and $TiO_2/Bi_2O_3$ (Anode 3) layers onto the Anode 1, despite moderate losses in electrical conductivity and active surface area. The CE of the Anode 3 was found to show the highest RCS generation rate, whereas the multi-junction architecture (Anode 4, sequential coating of $IrO_2/Ta_2O_5$, $SnO_2/Bi_2O_3$, and $TiO_2/Bi_2O_3$) showed marginal improvement. The microscopic observations indicated that the outer $TiO_2/Bi_2O_3$ could form a crack-free layer by an incorporation of anatase $TiO_2$ particles, potentially increasing the service life of the anode. The results of this study are expected to broaden the usage of dimensionally stable anodes in water treatment with an enhanced RCS generation and lifetime.

Sol-Gel 법으로 제작된 PZT 박막의 전기적 성질에 조성과 하부전극이 미치는 영향 (The effects of the composition and the lower electrode on the properties of PZT thin films prepared by Sol-Gel method)

  • 이정기;윤영섭
    • 전자공학회논문지A
    • /
    • 제32A권7호
    • /
    • pp.77-84
    • /
    • 1995
  • We studied the effects of the Zr/Ti ration and the bottom electrode (Pt or ITO) on the electrical properties of PZT thin films prepared by sol-gel method. Their permittivities and tagent losses with the variation of frequencies were measured by the LCR meter and their maximum polarizations, remanent polarizations, and coercive fields were obtained from the hysteresis loops measured by the Sawyer-Tower circuit. For the PZT thin film of the Zr/Ti ration of 53/47, permittivity at 10kHz, coercive field, maximum and remanent polarizations ere measured as 952, 20.7kV/cm, 10.43${\mu}C/cm^{2}$ and 4.3${\mu}C/cm^{2}$, respectively. For the film of the Zr/Ti ration of 25/75, coercive field, maximum and remanent polarizations were measured as 33.12kV/cm, 5.59${\mu}C/cm^{2}$ and 1.5${\mu}C/cm^{2}$, respectively. For the film of the Zr/Ti ratio of 75/25, they were measured as 23.8kV/cm, 7.45${\mu}C/cm^{2}$, and 3.5${\mu}C/cm^{2}$, repectively. Our investigation into the effects of the lower electrode on the electrical properties of PZT films showed the following results. The permittivities of the PZT films deposited on the ITO electrode decreased more quickly than those of the PZT films on the Pt electrode. The tangent losses of the former films increased more quickly than those of the latter. These may be due to the degradation of the quality of the interface between the electrode and the film, which results from the diffusion of Pb. It is also noticeable that permittivities and tangent losses of the PZT films deposited on the ITO electrode varied differently with the Zr/Ti ratio. This may indicate that the quality of the interface between the electrode and the film changes with the Zr/Ti ration of the PZT film.

  • PDF

전계측정용 전기광학 $Ti:LiNbO_3$ Mach-Zehnder 집적광학 간섭기에 관한 연구 (A Study on Electrooptic $Ti:LiNbO_3$ Mach-Zehnder integrated-optic interferometers for Electric-Field Measurement)

  • 정홍식
    • 대한전자공학회논문지SD
    • /
    • 제48권12호
    • /
    • pp.15-22
    • /
    • 2011
  • 전계 측정시스템에서 센서 감지부로 $1.3{\mu}m$ 파장에서 동작하는 대칭/비대칭 구조의 Mach-Zehnder 간섭기를 구현하였다. BPM 전산모사를 통해서 소자를 설계하였고, $LiNbO_3$에 Ti 확산방법으로 구현된 채널 광도파로에 집중전극구조를 배열하여 집적광학 칩을 제작하였다. 대칭 구조로 위상차가 없도록 제작된 소자는 전기신호 200Hz, 1kHZ 구형 파형에서 반 파장전압 $V_{\pi}$=6.6V, 변조 깊이 100%, 75%로 각각 측정되었다. 한편 ${\pi}$/2 위상차를 갖도록 설계된 비대칭 구조에서는 DC 0V에서 측정된 출력 광세기가 최고치에 약 1//2에 해당됨을 확인하였으며, 1kHz 전기 신호를 인가해서 ${\pi}$/2 위상차 때문에 나타나는 전기적 현상들을 확인하였다.

상부전극에 따른 SCT 세라믹 박막의 전기적 특성 (Electrical Properties of SCT Ceramic Thin Film with Top Electrode)

  • 조춘남;김진사;신철기;최운식;김충혁;박용필;유영각;이준응
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 D
    • /
    • pp.1501-1503
    • /
    • 1999
  • The $(Sr_{0.85}Ca_{0.15})TiO_3$(SCT) thin films are deposited on Pt-coated electrode$(Pt/TiO_2/SiO_2/Si)$ using RF sputtering method. Ag, Cu, Al, Pt films for the formation of top eletrode were doposited on SCT thin films by thermal evaporator and sputtering. The effects of top electodes have be studied on SCT samples with a variety of top electrode materials.

  • PDF

이산화티탄 촉매를 이용한 플라즈마 반응에 의한 SOx의 분해 (Reduction and decomposition of hazardous SOx by discharge plasma with TiO2)

  • 우인성;이중희;박성국;황명환;김병석
    • 대한안전경영과학회지
    • /
    • 제12권3호
    • /
    • pp.135-143
    • /
    • 2010
  • 본 연구에서는 대기오염물질인 유해 황산화물 가스를 이산화티탄 촉매 반응기와 연면 방전 반응기를 조합한 반응기에서 플라즈마 방전반응에 의하여 주파수 변화, 체류시간, 전극의 굵기, 첨가 모의가스 등의 공정 변수를 변화 시켜 분해제거 실험을 하였다. 실험 결과 황산화물의 분해제거 실험에서 주파수 10kHz에서 소비전력 19W에서 분해제거율은 99%이었으며 이산화티탄 촉매반응기를 부착한 경우가 없는 경우보다 5%이상 증가효과가 이었다. 첨가가스로 메탄을 첨가한 경우 분해제거율이 증가하였고, 산소농도가 높아질수록 증가하였다 또한 이산화 탄소를 첨가한 경우 분해율은 감소하였다.

SCT 박막의 상부전극 특성 (Top Electrodes Properties of SCT Thin Films)

  • 조춘남;김진사;전장배;유영각;김충혁
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 추계학술대회 논문집
    • /
    • pp.240-243
    • /
    • 1999
  • (Sr$\sub$0.85/Ca$\sub$0.15/)TiO$_3$thin films were deposited on Pt-coated TiO$_2$/SiO$_2$/Si wafer by the rf sputtering method. Experiments were conducted to investigate the electrical properties of SCT thin films with various top electrode. C-F and C-V measurements show that SCT thin films annnealed at 600$^{\circ}C$ have a larger capacitance than SCT thin films deposited at 400$^{\circ}C$ , and there is nearly no difference between top electrodes. I-V measurement show that Pt top electrode have a good leakage current density of < 10nA/$\textrm{cm}^2$,. making them suitable for DRAM application.

  • PDF

Ti Mesh처리 촉매전극/SPE 가 전기분해에 미치는 영향 (Effect of Catalyst plated Titanium-mesh Electrodes in Water Electrolysis using Solid Polymer Electrolyte)

  • 김연순;박기배;명광식;심규성;한상도
    • 한국에너지공학회:학술대회논문집
    • /
    • 한국에너지공학회 1998년도 춘계 학술발표회 논문집
    • /
    • pp.167-171
    • /
    • 1998
  • 수소는 2차 에너지원으로 그 자원이 풍부하며 청정에너지원으로 지구 환경문제를 해결할 수 있는 에너지로 주목을 받고 있다. 현재 무공해 수소를 제조하는 방법으로는 불을 전기 분해하는 방법 이외에 태양에너지 이용법, 바이오기술, 화학순환기술, 화석연료 분해법 등이 보고되고 있으며 모두 기초연구 단계에 있다. 이중에서 전기분해에 의한 수소의 제조기술은 경제성 및 효율향상을 위해 가장 많이 연구되고 있고 이미 우주선, 잠수함 등 특수용도로는 실용화되고 있는 기술이다. (중략)

  • PDF

Ti/Pt 전극을 이용한 염색폐수의 전기화학적 탈색효과

  • 차진우;홍영기;배기서
    • 한국염색가공학회:학술대회논문집
    • /
    • 한국염색가공학회 2003년도 춘계학술대회 논문집
    • /
    • pp.203-207
    • /
    • 2003
  • 현재 전국의 염색폐수 발생업체가 약 1,500여개로서 전체 폐수 배출업체의 4%를 차지하지만 폐수 방류량은 하루 55만톤으로 전체 폐수 방류량의 21%를 차지하고 있는 실정으로 이러한 염색 폐수의 처리에 있어서 기존의 폐수 처리방법에 의한 비용이 약 10-20만원/톤 소요되고 있다. 따라서 처리비용을 감소시키면서 보다 높은 처리 방법의 개발이 절실히 요구되어지고 있다. (중략)

  • PDF