• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.7-9
• /
• 1998

In this paper, dynamic characteristics analysis of linear induction motor with joints in the secondary conductor is discussed. The time stepped finite element method and moving mesh technique are used for simulation. ${\nabla}{\phi}$ of jointed secondary conductor is defined for simulation, respectively. Simulation results have shown that joints in the secondary conductor affect thrust ripple and attractive force ripple.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.83-85
• /
• 2007

This paper presents the vibration reduction of PMLSM according to permanent magnet array. The detent force and the lateral force arc generating the thrust ripple that cause vibration in PMLSM. The detent force, the thrust and the lateral force is analyzed by 3D FEM. And the acceleration sensor is used for experimentation of vibration.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.4
• /
• pp.209-215
• /
• 2006

Recently Permanent Magnet Linear Synchronous Motors(PMLSMs) are widely used for many linear transportation applications. The PMLSM has many advantages such as simple structure, high speed and thrust. However, especially in short primary type PMLSM, there exists very large detent force, which makes the thrust force ripple, undesired vibration and noise. The detent force is composed of the Cogging force and the End force. The Cogging force comes from the interaction between the permanent magnets and interior teeth of the stator. And the End force acts on the exterior teeth of the stator by the permanent magnets. Usually End force is larger than Cogging force, so the detent force is drasically reduced only by reducing the End force. This paper shows the End force is minimized by optimizing the stator length and chamfering the shape of the exterior teeth of the stator.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.40-42
• /
• 2004

In this paper, optimum shape design of permanent magnet in slotted type Permanent Magnet Linear Synchronous Motor(PMLSM) is progressed for minimization of detent force owing to structure of slot-teeth and thrust ripple by harmonic magnetic flux of permanent magnet. The characteristics of thrust and detent force computed by Finite element Analysis are acquired equal effect both skewed basic model and optimum model which is optimization of permanent magnet shape.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.8
• /
• pp.726-732
• /
• 2009

In many industries, the linear motor replaces the existing framework for linear transportation. Similar to other conventional motors, it is important to minimize the ripple of thrust and to maximize the thrust force of the linear motor. Because the two objectives are associated to each other, the multi-objective design process is necessary considering all objectives. This paper intends to optimize geometric parameters of the linear motor with two design objectives using design of experiments and sequential response surface method.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.40-42
• /
• 2005

In this paper, thrust ripple is minimized using notch and slot-aperture width adjustment in a slotted PMLSM and then optimal design was achieved by using a neural network. This paper has used the moving model node technique to reduce the time and the effort for calculation according to changing design parameters. As the result, the detent force of optimal model is decreased from 9.44[N] to 0.97[N] greatly compare with it of basic model. The thrust is decreased 1.3[%] from 342.07[N] to 337.48[N] a little.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1097-1099
• /
• 2004

This paper deals with the optimal design of a slotless type of permanent magnet linear synchronous motor (PMLSM). Response surface methodology, one of the optimization methods, is used to consider multiple response of the PMLSM. That is, it is applied to obtain more average thrust and less thrust ripple than prototype PMLSM. To analyze quickly, characteristic analysis of the PMLSM is performed by space harmonic method and final results of optimized PMLSM are compare with those of prototype PMLSM through finite element analysis.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.49 no.11
• /
• pp.749-756
• /
• 2000

Detent force develops generally undesirable effect that contributes to the output ripple of machine, vibration and noise. This paper proposes detent force minimization techniques for a Permanent Magnet Linear Synchronous Motor (PMLSM). In addition, thrust according to each minimization technique is estimated to observe the change of machine performance. A two-dimensional Finite Element Method is used to predict detent force and thrust due to structural factors and non-linearity. And moving node technique for geometric models is proposed to reduce modeling time and efforts.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.942-944
• /
• 2003

Detent force produced in permanent linear machines generally causes an undesired effect that contributes to the output ripple of machine, vibration and noise. This paper analyzes detent force and thrust in Permanent Magnet Linear Synchronous Motor(PMLSM) by using various detent force minimization techniques. A two dimensional Finite Element Analysis(FEA) is used to Predict detent force and thrust due to structural factors and non-linearity.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.135-137
• /
• 2005

In servo system demanding precision dynamic characteristics, application of the Permanent Magnet Linear Synchronous Machines (PMLSM) has advantage of analysis convenience by simple geometry and thrust ripple reduction from the sinusoidal back electromotive force and excited stator. Therefore, this paper presents design of surface-mounted PMLSM with slotless iron cored stator according to coil turns to satisfy the rate thrust. Also, from dynamic analysis for servo application of manufactured motor with heavy mass, we offer accurate range of the DC link voltage and acceleration in rate speed. This is applied to speed reference profile considering system characteristics in total length of moving position.