The Transactions of the Korean Institute of Electrical Engineers B (대한전기학회논문지:전기기기및에너지변환시스템부문B)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Detent Force Minimization Techniques in Permanent Magnet Linear Synchronous Motor

영구자석 선형동기전동기의 디텐트력 저감법

  • Published : 2000.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

Detent force develops generally undesirable effect that contributes to the output ripple of machine, vibration and noise. This paper proposes detent force minimization techniques for a Permanent Magnet Linear Synchronous Motor (PMLSM). In addition, thrust according to each minimization technique is estimated to observe the change of machine performance. A two-dimensional Finite Element Method is used to predict detent force and thrust due to structural factors and non-linearity. And moving node technique for geometric models is proposed to reduce modeling time and efforts.

Keywords

References

  1. 山田, '리니어모우터 응용 핸드북', 도서출판 世和, 1988
  2. 정인성, '개선된 수치해석 기법을 이용한 영구자석형 선형 동기전동기의 특성해석', 2000, 2, 한양대학교 박사논문
  3. 장석명, 윤인기, 이성호, 이중호, '영구자석형 선형 동기전동기 의 디텐트력 저감방식에 관한 특성해석 및 상호비교', 2000 년 대한전기학회 하계학술대회 논문집(B), pp.757-759, 2000, 7
  4. I. S. Jung, S. B. Yoon, J. H. Shim, D. S. Hyun,'Analysis of Force in a Short Primary Type and a Short Secondary Type Permanent Magnet Linear Synchronous Motor', Conference of IEMDC '97, Milwaukee, pp.MCl-8.1-MCl-8.3, 1997 https://doi.org/10.1109/IEMDC.1997.604157
  5. T. Yoshimura, H. J. Kim, Watada, S. Torii, D. Ebihara, 'Analysis of the Reduction of Detent Force in a Permanent Magnet Linear Synchronous Motor', IEEE Trans. on Magnetics., Vol. 31, No. 6, pp. 3737-3739, 1995
  6. S. Hwang, D. K. Lieu, 'Reduction of Torque Ripple in Brushless DC Motors', IEEE Trans. on Magnetics, Vol. 31, No. 6, pp. 3737-3739, 1995 https://doi.org/10.1109/20.489755
  7. S. Hwang, D. K. Lieu, 'Design of Techniques for Reduction of Reluctance Torque in Brushless Permanent Magnet Motors', IEEE Trans. on Magnetics, Vol. 30, No. 6, pp. 4287- 4289, 1994
  8. C. Studer, A. Keyhani, T. Sebastian and S. K. Murthy, 'Study of Cogging Torque in Permanent Magnet Machines', IEEE IAS Annual Meeting, pp. 42-49, 1997 https://doi.org/10.1109/IAS.1997.643006
  9. Takeo Ishikawa, Gordon R. Slemon, ' A Method of Reducing Ripple Torque in Permanent Magnet Motors without Skewing', IEEE Trans, on Magnetics, Vol. 29, No. 2, 1993 https://doi.org/10.1109/20.250808
  10. T. Li and G. Slemon, 'Reduction of Cogging Torque in Per manent Magnet Motors', IEEE Trans. on Magnetics. Vol. 24. No. 6, pp.2901-2903. 1988 https://doi.org/10.1109/20.92282
  11. Y. Kawase, T. Yamaguchi, Y. Hayashi, 'Analysis of Cogging Torque of Permanent Magnet Motor by 3-D Finite Element Method', IEEE Trans. on Magnetics. Vol. 31. No. 3, pp.2044-2047. 1995 https://doi.org/10.1109/20.376445