• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.156-163
• /
• 2005

In this paper, we analyzed the performance of VDL mode 3 system model whose specification is defined by ICAO(International Civil Aviation Organization). For performance evaluation, we obtained BER(Bit Error Rate), transmission delay time, burst retransmission rate and throughput. From the analysis result, we could explicitly define relationships among BER, transmission delay time, throughput and burst restransmission rate. In addition, it became known that V/D retransmission rate and throughput are closely related in down link channel.

• Journal of Communications and Networks
• /
• v.9 no.3
• /
• pp.213-218
• /
• 2007

Methods for symbol-by-symbol channel feedback and adaptation of symbol durations have been recently proposed. In this paper, we quantitatively analyze the gain in error-constrained data throughput due to such an extremely rapid adaptation of symbol durations to fast-time-varying channels. The results show that a symbol-by-symbol adaptation can achieve a throughput gain by orders of magnitude over a frame-by-frame adaptation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.4
• /
• pp.40-45
• /
• 2002

An AS/RS construction cost minimization model under throughput rate requirement constraint has been developed, whose objective function includes S/R machine cost, storage rack cost, and interrace conveyor cost. S/R machine cost is a function of the storage rack height, the unit load weight, and the control logic used by the system, while storage rack cost is a function of the storage rack height, the weight and the volume of the unit load. Since the model is a nonlinear integer programming problem which is very hard to solve exactly with large problem size, a solution procedure is developed to determine the height and the length of the storage rack with a fixed number of S/R machines, while increasing the number of S/R machines one by one to meet the throughput rate requirement.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.5
• /
• pp.21-26
• /
• 2012

Intra-session network coding has been proposed to improve throughput by simplifying scheduling of multi-hop wireless network and efficiency of packet transmission. Multi-rate transmission has been used in multihop wireless networks. An opportunistic routing with multirate shows throughput improvement compared with single rate. In this paper, we propose a method of throughput improvement in multi-hop wireless network by using multi-rate and intra-session network coding. We suggest a method to select an local optimal transmission rate at each node. The maximum throughput is evaluated by using linear programming (LP). To solve the LP, we use MATLAB and lp_solve IDE program. The performance evaluation results show that end-to-end throughput is improved by using multirate and intra-session network coding can achieve better throughput than opportunistic routing.

• Journal of Navigation and Port Research
• /
• v.40 no.2
• /
• pp.57-65
• /
• 2016

The port throughput situation has changed since the 2008 financial crisis in the US. Therefore, we studied the situation, accurately estimating port traffic of Korean port after the 2008 financial crisis. We ensured the proper port facilities in response to changes in port traffic. In the results of regression analysis, Korean GDP and the real effective exchange rate of Korean Won were found to increase the container throughput in Korean and Busan port, as well as trade volume with China. Also, the real effective exchange rate of Korean Won was found to increase the port transshipment cargo volume. Based on the ARIMA models, we forecasted port throughput and port transshipment cargo volume for the next six years (72 months), from 2015 to 2020. As a result, port throughput of Korean and Busan ports was forecasted by increasing annual the average from about 3.5% to 3.9%, and transshipment cargo volume was forecasted by increasing the annual average about 4.5%.

• Journal of Korean Society of Transportation
• /
• v.24 no.4 s.90
• /
• pp.129-148
• /
• 2006

The objective of this thesis is to develop a capacity analysis and to develop a methodology to evaluate Level of Service over the entire freeway sections by single MOE (Measure of Effectiveness) This study set forth from a following viewpoint. to analyze entire freeway sections as freeway facility system, it is important to identify the exact point where congestion would occur and the extent of the congestion. Therefore, in this thesis, congestion mechanism on freeways was figured out and congestion analysis methodology was developed. Thereby maximum possible throughput rate and maximum throughput rate in bottleneck sections were calculated and a congestion analysis was carried out. The difference between the new method and existing Procedures is that maximum possible throughput rate and maximum throughput rate. that can be considered as capacities of un-congested and congested flow in the bottleneck section, are variable capacities dependent on demand flow.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.2
• /
• pp.246-253
• /
• 2007

All of the machines in a production line can be classified into bottleneck and non-bottleneck machines. A bottleneck is a resource whose capacity limits the throughput of the whole production facility. This paper addresses a batch sizing problem at the bottleneck machine. Traditionally, most batch sizing decisions have been made based on the EOQ (economic order quantity) model where setup and inventory costs are considered while throughput rate is assumed to be given. However, since batch size affects the capacity of the bottleneck machine, the throughput rate may not be constant. As the batch size increases, the frequency of the setup decreases. The saved setup time can be transferred to processing time, which results in higher throughput. But, the larger batch size may also result in longer lead time and larger WIP inventory level. This paper presents an alternative method to determine batch size at the bottleneck machine in a manufacturing line. A linear search algorithm is introduced to find optimal throughput rate and batch size at the same time. Numerical examples are provided to see how the proposed method works and to investigate the effects of some parameters.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.406-409
• /
• 2000

This paper proposes a method that enables us to implement the recursive least squares (RLS) algorithm at, high throughput rate using fewer processing elements (PEs). It is known that the pipeline processing can provide a high throughput rate. But, pipelining is effective only when enough number of PEs are available. The proposed method achieves high throughput rate using a few PEs. The effectiveness of the proposed method is verified through simulations on programmable digital signal processors (in the following, DSP processors).

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.473-476
• /
• 2008

In this paper, we designed the main mechanism of high throughput device for rod-cuts of spent fuel. For this, we analyzed the mechanical methods(slitting, ball mill, roller straightening) and chemical methods(muffle furnace, rotary kiln). As the results, methods of ball drop and rotary drum for concepts design were selected in the analysis step. For enhancement of oxidation rate, we devised the blades on the reactor with mesh type. Also, for enhancement of decladding rate, we designed ball size and rotation reactor with mesh type and devised the vacuum system for fission products. Mechanisms of oxidation and recovery can simultaneously handle the rod-cuts of spent fuel and independently recover. The results of mechanism design can be used for scale-up of high throughput device.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.1
• /
• pp.45-57
• /
• 2005

In this paper, we extend the performance of bidirectional TCP connection over end-to-end network that uses transfer rate-based flow and congestion control. The sharing of a common buffer by TCP packets and acknowledgement has been known to result in an effect called ack compression, where acks of a connection arrive at the source bunched together, resulting in unfairness and degraded throughput. The degradation in throughput due to bidirectional traffic can be significant. Even in the simple case of symmetrical connections with adequate window size, the connection efficiency is improved about 20% for three levels of background traffic 2.5Mbps, 5.0Mbps and 7.5Mbps. Otherwise, the throughput of jitter is reduced about 50% because round trip delay time is smaller between source node and destination node. Also, we show that throughput curve is improved with connection rate algorithm which is proposed for TCP congetion avoidance as a function of aggressiveness threshold for three levels of background traffic 2.5Mbps, 5Mbps and 7.5Mbps. By analyzing the periodic bursty behavior of the source IP queue, we derive estimated for the maximum queue size and arrive at a simple predictor for the degraded throughput, applicable for relatively general situations.