• 한국정보통신학회논문지
• /
• 제9권1호
• /
• pp.204-209
• /
• 2005

초음파 센서를 이용한 호흡측정방식은 관성 및 압력의 오차의 영향을 거의 받지 않고, 반영구적으로 사용이 가능한 호흡기기이다. 초음파의 특성을 이용한 것으로 송수신시 초음파의 매질인 공기의 흐름에 의한 반송형식인 초음파의 전달속도 차이를 이용하여 호흡량 및 흐름을 detecting하는 기술이다. 본 논문에서는 환자를 중심으로 측정이 이루어져야 하기 때문에 센서의 송수신시 일어나는 신호의 sensitivity를 향상시켜서 약한 호흡에도 dectection이 가능하도록 시스템의 성능을 향상시켰다.

• 전기학회논문지
• /
• 제56권12호
• /
• pp.2202-2207
• /
• 2007

The present article investigates experimentally and theoretically thermal and optical characteristics of thin film structures through measurement of thermal conductivity of Pyrex 7740 and reflectance in silicon thin film. The $3{\omega}$ method is used to measure thermal conductivity of very thin film with high accuracy and the optical characteristics in thin films are studied to examine the influence of incidence angle of light on reflectance by using the CTM(Characteristics Transmission Method) and the 633 nm He-Ne laser reflectance measurement system. It is found that the estimated reflectance of silicon show good agreement with experimental data. In particular, the present study solves the EPRT(Equation of Phonon Radiative Transport) which is based on Boltzmann transport equation for predicting thermal conductivity of nanoscale film structures. From the results, the measured thermal conductivity is in good agreement with the previous published data. Moreover, thermal conductivities are estimated for different film thickness. It indicates that as film thickness decreases, thermal conductivity decreases substantially due to internal scattering.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1678-1681
• /
• 2004

The light-transmission technique has been applied to a slit rheometer for measuring red blood cell aggregation as well as blood viscosity over a range of shear rates. For measurement of blood viscosity and aggregation, instantaneous pressure and transmit-light intensity are measured with time. Using a precision pressure measurement, one can determine the shear stress and shear rate. In addition, a transmitted light through a blood sample indicates degree of RBC aggregation. With abruptly flowing with high shear rate, RBCs rapidly disaggregate and the intensity of the transmitted light becomes low. When continuously flowing with decreasing shear rate, RBCs tend to re-aggregate and the corresponding transmit-intensity gradually increases with time. The light intensity as a degree of RBC aggregation is plotted against shear rate and compared with blood viscosity. The advantages of this design are dual measurement at a time, simplicity, i.e., ease of operation and no moving parts, low cost, short operating time, and the disposable kit which is contacted with blood sample.

• ETRI Journal
• /
• 제36권2호
• /
• pp.286-292
• /
• 2014

This paper presents a compact structure composed of an upper high-impedance transmission line, a middle extended parallel coupled line, and a pair of inter-coupled symmetrical stepped impedance stubs. Detailed investigation into this structure based on an equivalent circuit analysis reveals that this proposed structure exhibits a quasi-elliptic low-pass filtering response with three transmission zeros. Moreover, the positions of the three transmission zeros can be tuned and reallocated flexibly by choosing the proper circuit parameters. Finally, the design concept is validated through the design, fabrication, and measurement of two exemplary low-pass filters (LPFs) with one single unit and two cascaded asymmetric units. The measured results agree well with the simulated results. In addition, in the range of $1.42f_c$ to $7.03f_c$, the fabricated quasi-elliptic LPFs experimentally demonstrate a very wide upper-stopband of 20 dB using a compact size of only $0.0089{\lambda}_g{^2}$, where ${\lambda}_g$ is the guided wavelength of a $50{\Omega}$ transmission line at the central frequency.

• 한국기계가공학회지
• /
• 제15권1호
• /
• pp.14-19
• /
• 2016

Transmission error (TE) is the most important cause of gear noise and vibration because TEs affect the changes of the force and the speed of gears. TE is usually expressed as an angular deviation, or a linear deviation measured at the pitch point and calculated at successive positions of the pinion as it goes through the meshing cycle. Accurate measurement of TE for gear transmission will provide a reasonable basis for gear design, manufacturing processes and quality control. Therefore, in order to study the accuracy of the gear transmission, stability, TE, vibration and noise after gear micro-geometry modification, a gear transmission test rig is proposed in this paper, which is based on the existing technical conditions, by using reasonable testing methods, hardware and a signal processing method. All of the details and the experience can be taken into consideration in the next upgraded test rig.

• 한국전자통신학회논문지
• /
• 제9권12호
• /
• pp.1365-1372
• /
• 2014

최근 LTE(Long-Term Evolution) 이동통신시스템이 보급되어 본격적인 서비스가 제공되고 있다. 특히 LTE 시스템은 3G 시스템 등 과거 이동통신시스템 대비 월등한 전송 속도를 보장함으로써 높은 전송 속도를 요구하는 서비스도 이동단말을 통해서 제공될 수 있도록 하고 있다. 향후 IPTV와 같은 멀티미디어 서비스가 LTE 시스템을 통해서 제공되기 위해서는 실제 사용 환경에서 LTE 시스템이 보여주는 전송 속도의 변화에 대한 기본적인 이해가 필요하다. 따라서 본 논문에서는 CQI와 BLER과 같은 무선 품질 지표가 LTE 시스템의 전송 속도에 영향을 미치는 체제에 대해서 살펴보고 실측 결과를 통해서 이를 검증한다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권4호
• /
• pp.79-82
• /
• 2008

A method is described for ideally reconstructing the profile from a surface profiling measurement containing a reasonable amount of null measurement data. The proposed method can conjecture lost information and rectify irregular data that result due to bad measuring environments, signal transmission noise, or instrument-induced errors, The method adopts the concept of computer graphics and consists of several processing steps. First, a search for valid data in the neighborhood of the null data is performed. The valid data are then grouped and their contours are extracted. By analyzing these contours, a bounding box can be obtained and the general distribution of the entire area encompassing the valid and null data is determined Finally, an ideal surface model is overlaid onto the measurement results based on the bounding box, generating a complete reconstruction of the calculations, A surface-profiling task on a liquid crystal display photo spacer is used to verify the proposed method. The results are compared to those obtained through the use of a scanning electron microscope to demonstrate the accuracy of the proposed method.

• 한국수산과학회지
• /
• 제53권2호
• /
• pp.209-217
• /
• 2020

The purpose of this study was to compare the model-predicted and experimentally measured target strength (TS) of golden cuttlefish Sepia esculenta cuttlebones. Ultrasonic signals used to estimate frequency-dependent TS and the speed of sound in cuttlebones were measured by pulse-echo and through-transmission techniques, using a chirp sonar system and an ultrasonic pulser/receiver system under controlled laboratory conditions. The model appeared to slightly underestimate the predicted TS values in the frequency range of 100-160 kHz. However, there was good agreement between the predicted and measured TS values in the frequency range of 160-200 kHz. The significant similarity between the model-predicted and experimentally measured TS values supports the use of the Kirchhoff-ray mode (KRM) model for acoustic scattering analysis of cuttlebones. Accordingly, we concluded that the KRM model can be used as a tool to evaluate the frequency-dependent variability of TS due to changes in golden cuttlefish swimming depth.

• 오토저널
• /
• 제12권5호
• /
• pp.85-96
• /
• 1990

The object of this study is to develop the computer program to predict the transmission loss of a perforated tube muffler with mean flow, and to investigate the influence of porosity and mean flow on the performance of the muffler. The numerical model is made by dividing the muffler into small segments and estimating the transfer matrices for each segment. The computer program is developed for the calculation of the transmission loss of a through-or cross-flow perforated muffler. The experiment is performed for the measurement of the transmission loss and/or the pressure drop for various porosity and flow velocity. From the comparison between computation and experiment, is known that the numerical model agrees well with the experimental result. The effect of porosity and flow velocity on the acoustic performance and the flow resistance of a muffler is presented.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.251-255
• /
• 2003

In this paper, a miniaturized directional coupler utilizing lumped element is proposed as a interdigital capacitor. The traditional miniaturization technique of transmission line realized a utilizing MIM(Metal-Insulator-Metal) capacitor on CPW(Coplanar Waveguide). However, we present a simplified design procedure without additional manufacturing process utilizing interdigital capacitor on microstrip with ease of design. The similar characteristics between the conventional directional coupler with ${\lambda}/4$ transmission line and the miniaturized directional coupler with ${\lambda}/8$ transmission line are validated through simulation and measurement results. Miniaturization rate of total size is about 25% while coupled line is about 60%. As a result, this proposed directional coupler can reduce the size of mobile communication system at 2 GHz.