• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.7-11
• /
• 2020

Enormous methods have been proposed for the detection and segmentation of blur and non-blur regions of the images. Due to the limited available information about the blur type, scenario and the level of blurriness, detection and segmentation is a challenging task. Hence, the performance of the blur measure operators is an essential factor and needs improvement to attain perfection. In this paper, we propose an effective blur measure based on the local binary pattern (LBP) with the adaptive threshold for blur detection. The sharpness metric developed based on LBP uses a fixed threshold irrespective of the blur type and level which may not be suitable for images with large variations in imaging conditions and blur type and level. Contradictory, the proposed measure uses an adaptive threshold for each image based on the image and the blur properties to generate an improved sharpness metric. The adaptive threshold is computed based on the model learned through the support vector machine (SVM). The performance of the proposed method is evaluated using a well-known dataset and compared with five state-of-the-art methods. The comparative analysis reveals that the proposed method performs significantly better qualitatively and quantitatively against all the methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.892-896
• /
• 2011

This paper proposes a two-stage synchronization scheme using a serial search non-coherent correlator appropriate for the IEEE 802.15.4a system. The proposed method improved the synchronization performance by using multi-pulse signals unlike the conventional method using single-pulse signals. It also compensated for the degradation of performance at low SNR resulting from the use of fixed threshold by applying the adaptive threshold technique. The proposed method showed a detection probability that is higher by approximately 0.2-0.3 compared with the conventional method in the IEEE 802.15.4a channel model.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.105-115
• /
• 2015

PURPOSES : This study aimed to evaluate the appropriateness of safety with the standard for threshold zone luminance as specified in the Recommendation for Lighting of Traffic Tunnel, which has been widely adopted worldwide. METHODS : A driving test of the subject in a full-scale road tunnel was conducted. The adaptation luminance and threshold zone luminance, which should be known for the driver to perceive an object within stopping sight distance, were obtained. These values were compared with the adaptation luminance and threshold zone luminance obtained by the existing reduced model test and tunnel lighting standard that has served as a guideline for the current threshold zone luminance standard. RESULTS : According to this study, threshold zone luminance should be increased to at least 1.8 times the value proposed in the existing studies and to twice the domestic tunnel lighting standard (KS C 3703: 2014). CONCLUSIONS : The threshold zone luminance proposed in this study differs largely from that obtained from indoor tests and from the current tunnel lighting standard used worldwide; this difference may be attributed to the fact that the indoor tests did not incorporate driving workload, non-uniformity of luminance distribution in terms of sight, and factors that reduce the visibility of the driver, such as the light reflected into the driver's eyes. Hence, it is necessary to further review the factors that reduce the visibility of drivers approaching tunnels in order to determine the rational tunnel threshold zone luminance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.2939-2945
• /
• 2014

This paper has analyzed the change of threshold voltage for oxide structure of symmetric and asymmetric double gate(DG) MOSFET. The asymmetric DGMOSFET can be fabricated with different top and bottom gate oxide thickness, while the symmetric DGMOSFET has the same top and bottom gate oxide thickness. Therefore optimum threshold voltage is considered for top and bottom gate oxide thickness of asymmetric DGMOSFET, compared with the threshold voltage of symmetric DGMOSFET. To obtain the threshold voltage, the analytical potential distribution is derived from Possion's equation, and Gaussian distribution function is used as doping profile. We investigate for bottom gate voltage, channel length and thickness, and doping concentration how top and bottom gate oxide thickness influences on threshold voltage using this threshold voltage model. As a result, threshold voltage is greatly changed for oxide thickness, and we know the changing trend greatly differs with bottom gate voltage, channel length and thickness, and doping concentration.

• The Korean Journal of Pain
• /
• v.21 no.2
• /
• pp.126-130
• /
• 2008

Background: Females generally have a lower pain and temporal summation threshold than men. However, the results of studies designed to evaluate gender differences in the thresholds of heat pain and the temporal summation have been inconsistent. Newly developed device, CHEPS (Contact Heat Evoked Potential Stimulation) model of PATHWAY, have superiority on its fast rise and return time in temperature. Therefore we investigated gender differences in heat pain and temporal summation threshold. Methods: Forty healthy volunteers (20 males and 20 females) were enrolled in this study. A thermode was applied to the volar side of each volunteer's left forearm and heat pain and the temporal summation threshold was then measured. The heat pain threshold was estimated using the staircase method by starting from $36^{\circ}C$ and then increasing the temperature in $0.5^{\circ}C$ increments. The temporal summation threshold was estimated by applying five successive stimulation of the same temperature starting at $2^{\circ}C$ lower than the heat pain threshold and then increasing the temperature in $0.5^{\circ}C$ increments. Results: The mean heat pain thresholds was found to be $41.63{\pm}1.63^{\circ}C$ for males and $41.60{\pm}1.84^{\circ}C$ for females and the temporal summation thresholds were found to be $40.83{\pm}1.64^{\circ}C$ for males and $40.77{\pm}1.93^{\circ}C$ for females. The differences between males and females were not statistically significant. Conclusions: The result of this study suggested that there are no gender differences in heat pain and temporal summation threshold.

• Nuclear Engineering and Technology
• /
• v.53 no.3
• /
• pp.860-865
• /
• 2021

A data-based model, such as an AAKR model is widely used for monitoring the drifts of sensors in nuclear power plants. However, since a training dataset and a test dataset for a data-based model cannot be constructed with the data from all the possible states, the model uncertainty cannot be good enough to represent the uncertainty of estimations. In fact, the errors of estimation grow much bigger if the incoming data come from inexperienced states. To overcome this limitation of the model uncertainty, a new measure of uncertainty for a data-based model is developed and the predicted uncertainty is introduced. The predicted uncertainty is defined in every estimation according to the incoming data. In this paper, the AAKR model is used as a data-based model. The predicted uncertainty is similar in magnitude to the model uncertainty when the estimation is made for the incoming data from the experienced states but it goes bigger otherwise. The characteristics of the predicted model uncertainty are studied and the usefulness is demonstrated with the pressure signals measured in the flow-loop system. It is expected that the predicted uncertainty can quite reduce the false alarm by using the variable threshold instead of the fixed threshold.

• Korean journal of applied entomology
• /
• v.37 no.2
• /
• pp.151-157
• /
• 1998

Infestations of two spotted spider mite (TSSM), Tetranychus urticae Koch, on glasshouse rose (Rosa sp.) grown by an arching method, were determined by counts of the number of TSSM per leaflet in Buyeo, Chungnam Province, for a 2-yr period. Binomial sampling plans were developed based on the relationship between mean density per leaflet (m), and proportion of leaflets infested with ( T mites (PT), according to the empirical model In (m) = a+p In (-ln (1 -PT)). T was defined as tally threshold, and set to 1, 3, 5, 7, and 9 mites per leaflet. Increasing sample size had little effects on the precision of the binomial sampling plan, regardless of tally threshold. However, the precision increased with higher tally thresholds. There was a negligible improvement in precision with T ) 7 mites per leaflet. T= 7 was chosen as the best tally threshold for estimating densities of TSSM based on the precision of the model. Independent data set was used to evaluate the model. The binomial model with T= 7 provided reliable predictions of mean densities of TSSM observed on the commercial glasshouse roses.

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.405-412
• /
• 2016

Infestation of adults and pupae of sweetpotato whitefly, Bemisia tabaci, on paprika (Capsicum annuum var. angulosum) grown in greenhouses in Jinju, Gyeongnam province during 2014was determined by counts of the number of target stage of B. tabaci per leaflet. Binomial sampling plans were developed based on the relationship between the mean density per leaflet (m) and the proportion of leaflets infested with less than T whiteflies ($P_T$), according to the empirical model $(({\ln}(m)={\alpha}+{\beta}({\ln}(-{\ln}(1-P_T))))$. T was defined as the tally threshold, and set to 1, 2, 3, 4, 5 (adults) and 1, 3, 5, 7 (pupae) per leaflet in this study. Increasing the sample size, regardless of tally threshold, had little effect on the precision of the binomial sampling plan. Based on the precision of the model, T = 1 was chosen as the best tally threshold for estimating densities of B. tabaci adults and T = 3 was best tally threshold in B. tabaci pupae. Using the results obtained in the greenhouse, a simulated validation of the developed sampling plan by RVSP (Resampling Validation for Sampling Plan) demonstrated the plan's validity. Above all, the binomial model with T = 1 and T = 3 provided reliable predictions of the mean densities of B. tabaci adults and pupae on greenhouse paprika.

• Korean journal of applied entomology
• /
• v.40 no.3
• /
• pp.197-202
• /
• 2001

The density of citrus red mite(CRM), Panonychus citri(McGregor), on the commercial satsuma mandarin Citrus unshiu L. groves were determined by counts of the number of CRM per leaf using by leaf sample in Jeju for 2 years. Binomial sampling plans were developed based on the relationship between the mean density per leaf(m) and the proportion of leaf infested with less than T mites per leaf($P_{T}$), according to the empirical model $ln(m)={\alpha}+{\beta}ln(-ln(1-P_{T}))$. T was defined as tally threshold, and set to 1, 3, 5 and 7 mites per leaf in this study. Increasing sample size, regardless of tally threshold, had little effects on the precision of the binomial sampling plan. Increasing sampling size had little effect on the precision of the estimated mean regardless of tally thresholds. T=1 was chosen as the best tally threshold for estimating densities of CRM based on the precision of the model. The binomial model with T=1 provided reliable predictions of mean densities of CRM observed on the commercial satsuma mandarin groves. Binomial sequential sampling procedure were developed for classifying the density of CRM. A binomial sampling program for decision-making CRM population level based on action threshold of 2 mites per leaf was obtained.

• Journal of the Korean Data and Information Science Society
• /
• v.17 no.4
• /
• pp.1349-1364
• /
• 2006

An analytic approach that provides explicit estimates of risk on cataract and epilation data is evaluated by reasonableness of conceivable relative risk models regarding a simple, odds, logistic or Gompertz regression method, assuming a binomial distribution. In these analyses, we apply relative risk models with two thresholds between epilators and nonepilators from a highly characteristic lesion of which radiation cataract does not occur around 2 gray for a single acute exposure. The risk models are fitted to the data assuming 10 as a constant relative biological effectiveness of neutron. The likelihood of observing the entire data set in these models fitted is evaluated by an individual binary-response array. Estimation of a threshold with or without severe epilation and the 100 ($1-\alpha$)% confidence limits are derived from the maximum likelihood approach. The relative risk model with two thresholds can be expressed as a formula with structure of Background $\times$ RR, where RR includes threshold models with or without epilation. The radiosensitivity of ionizing radiation to cataracts has been examined for the relationship between epilators and nonepilators.