• 한국정보통신학회논문지
• /
• 제17권1호
• /
• pp.151-157
• /
• 2013

본 연구에서는 다중게이트 구조인 나노 와이어 n-채널 무접합(junctionless)와 반전모드(inversion mode) 다중게이트 MOSFET(Multiple-Gate MOSFET : MuGFET)의 PBTI에 의한 소자 특성 저하를 비교 분석하였다. PBTI에 의해서 무접합 및 반전모드 소자의 문턱전압이 증가하는 것으로 관측되었으며 무접합 소자의 문턱전압 변화가 반전모드 소자보다 작음을 알 수 있었다. 그러나 소자특성 저하 비율은 반전모드 소자가 무접합 소자보다 큰 것으로 관측되었다. 특성저하 활성화 에너지는 반전모드 소자가 무접합 소자보다 큰 것을 알 수 있었다. PBTI에 의한 소자 특성 저하가 무접합 소자보다 반전모드 소자가 더 심한 것을 분석하기 위하여 3차원 소자 시뮬레이션을 수행하였다. 같은 게이트 전압에서 전자의 농도는 같으나 수직방향의 전계는 반전모드 소자가 무접합 소자보다 큰 것을 알 수 있었다.

• 한국인터넷방송통신학회논문지
• /
• 제18권6호
• /
• pp.213-220
• /
• 2018

본 논문은 동종업계의 경쟁업체가 시장을 독점하고 있는 상황에서, 신규로 점포를 개설하여 경쟁업체 고객을 빼앗아 경쟁업체 점포를 문을 닫게 하여 생존할 수 있는 점포위치를 결정하는 생존 점포 개설 위치 선정 문제(SFLP)를 다룬다. 이 문제는 포화된 시장에서 문을 여는 점포보다 문을 닫는 점포가 훨씬 많아지고 있는 현실에서 점포를 신규로 개설하고자 할 때 부닥치는 난제이다. 이 문제에 대해 Serra et al.는 반복적 휴리스틱 집중 알고리즘을, Han et al.은 반복적인으로 최대 고객 확보 위치를 찾는 알고리즘을 제안하였다. 그러나 이들 방법은 다수의 위치들에 대해 반복적으로 계산하는 어려움이 있다. 본 논문에서는 경쟁업체 인접 지점들만을 대상으로 경쟁업체 점포를 폐쇄시키면서 최대 고객을 확보할 수 있는 지점으로 해를 구하고, 최소 고객 확보 지점을 최대 고객을 확보한 다른 경쟁업체 점포를 폐쇄시킬 수 있는 지점으로 변경하는 과정을 수행하였다. 제안된 알고리즘은 단순하면서도 MS-Excel을 활용하여 해를 구할 수 있는 장점을 갖고 있다.

• Animal Bioscience
• /
• 제34권4호
• /
• pp.714-723
• /
• 2021

Objective: This study aimed to determine the effects of soft pellet creep feed (SPCF) on growth performance and intestinal development in piglets. Methods: A total of 18 sows and their litters of crossbred piglets (14±2 days, 3.73±0.72 kg) were assigned to one of three dietary groups receiving i) powder creep feed (PCF), ii) hard pellet creep feed (HPCF) or iii) SPCF during the pre-weaning period. After weaning, piglets were selected for continuous evaluation of the three diets on growth performance and intestinal health. Results: In the pre-weaning period, the average daily feed intake and average daily dry matter intake were significantly higher in the SPCF group than the HPCF group (p<0.05). In the post-weaning and entire experimental period, the different diets had no significant effect on growth performance. At 10 d after weaning, the serum glucose concentration was lower in the SPCF group (p<0.05) than the other groups; a higher (p<0.05) villus height and lower (p<0.05) crypt depth in the jejunum were also observed in the SPCF group than the other groups; Meanwhile, in the duodenum and jejunum, the SPCF group had a higher (p<0.05) villus height to crypt depth ratio than the other groups; Furthermore, the higher (p<0.05) threshold cycle values of lactic acid bacteria and lower (p<0.05) threshold cycle values of Clostridium, Enterobacter and Escherichia coli were also observed in the SPCF group, and the sucrase and maltase activity was higher (p<0.05) in the SPCF group than the other groups in duodenum and ileum. Conclusion: The SPCF improved pre-weaning feed intake and decreased the negative effects of weaning stress in the intestine in piglets.

• Current Optics and Photonics
• /
• 제7권6호
• /
• pp.721-731
• /
• 2023

This paper studies various roughness parameters, besides waviness, texture, and nonlinear parameters of Bismarck brown Y (BBY)-doped Poly(methyl methacrylate) (PMMA) films based on the computed values of optical limiting (OL) threshold power and nonlinear refractive index. The films' morphology, grain size, and absorption spectra were investigated using atomic force microscopy in conjunction with ultraviolet-visible (UV-Vis) spectrophotometer. The particle size of the films ranged between 4.11-4.51 mm and polymer films showed good homogeneity and medium roughness, ranging from 1.11-4.58 mm. A polymer film's third-order nonlinear optical features were carried out using the Z-scan methodology. The measurements were obtained by a continuous wave produced from a solid-state laser with a 532 nm wavelength. According to the results, BBY has a nonlinear refractive index of 10^-6 cm²/W that is significantly negative and nonlinear. The optical limiting thresholds are roughly 10.29, 13.52, and 18.71 mW, respectively. The shift of nonlinear optical features with the film's concentration was found throughout the experiment Additionally, we found that the polymer samples have outstanding capabilities for restricting the amount of optical power that may be transmitted through them. We propose that these films have the potential to be used in a wide variety of optoelectronic applications, including optical photodetectors and optical switching.

• 한국산업보건학회지
• /
• 제18권4호
• /
• pp.293-302
• /
• 2008

Lead chromate is made by sodium dichromate and lead acetate, and has being used widely in the part of pigment, paints, inks, plastics and so on. Even though lead chromate has health hazards which like both lead and chromium, there are a few study about pigment workplaces using lead chromate in Korea. The purpose of this study is to evaluate workers' exposure levels and airborne lead and chromium concentration in the pigment workplaces using lead chromate. There are 20 workers in the total 5 workplaces. 10 workers(50%) have been exposed to lead and 3 workers(15%) have been exposed to chromium, which exceeded the American Conference of Governmental Industrial Hygienists(ACGIH) Threshold Limit Value (Pb: $0.05\;mg/m^3$, Cr: $0.012\;mg/m^3$) and Korean Ministry of Labor's Standard. Geometric mean (GM) of airborne lead was highest in pigment ($0.0421\;mg/m^3$), paint ($0.0020\;mg/m^3$) and PVC coloring ($0.0007\;mg/m^3$), respectively(p<0.05). The result of airborne chromium concentration was paint ($0.0033\;mg/m^3$), paint ($0.0004\;mg/m^3$) and PVC coloring ($0.0003\;mg/m^3$). Also the lead and chromium concentration in the manual process is each 30 times and 10 times higher than the value in automatic process(p<0.01). In the classified process by detail, the concentration of airborne lead was $0.0638\;mg/m^3$ in grinding & packaging, mixture & after-measuring ($0.0436\;mg/m^3$), filtration & drying ($0.0402\;mg/m^3$), lead nitrate & dissolution($0.0129\;mg/m^3$), pigment commitment & mixture ($0.0013\;mg/m^3$) and dispersion & grinding ($0.0010\;mg/m^3$) (p<0.05). Moreover the concentration of a sample in weighting & packaging was $0.0023\;mg/m^3$. The concentration of lead in workers' blood was pigment (15.12 ug/dl), paint (4.74 ug/dl) and PVC coloring (2.50 ug/dl), and some samples have exceeded biological exposure limit. In conclusion, the depending on their work industry and process, workers have been exposed to the high lead chromate.

• 한국산업보건학회지
• /
• 제7권2호
• /
• pp.245-263
• /
• 1997

For twelve solvent thinners, evaporation rates of components were investigated and models to estimate the actual concentration have been evaluated. Also, the current ACGIH TLVs (Threshold Limit Values) for the concentration of organic mixtures have been adjusted. The results of this study are summarized as follows : 1. Airborne concentrations of solvent thinner components were related to their respective vapor pressure (r=0.96). On the other hand, there was no significant relation between the concentrations in the air of the thinner compounds and the original amount in liquid form. 2. Airborne concentrations of each chemical were estimated by temperature at $8.5{\pm}1$, $16.7{\pm}1$ and $31.5{\pm}2^{\circ}C$ with an air velocity of 1.5 m/s. The concentrations were increased by increasing temperature (p<0.05). The percentage of concentrations were proportionate to their respective percentage of vapor pressure. Among the chemicals studied, n-butyl acetate, n-butyl alcohol, m-xylene, p-xylene and o-xylene showed a clear relationship to temperature. 3. Airborne concentration of each chemical was estimated by air velocity at 0.05, 1.50 and 2.50 m/s, with a constant temperature at $17{\pm}2^{\circ}C$. The concentrations were increased by increasing air velocity (p<0.05). The percentage of concentrations were proportionate to their respective percentage of vapor pressure. Among the chemicals studied, n-butyl alcohol, m-xylene and p-xylene showed a clear relationship to velocity. 4. In estimating the concentrations of solvent thinners by temperature and air velocity, ACGIH TLVs for mixtures tended to be larger than the values obtained by ACGIH exposure index. It shows that ACGIH TLVs for mixtures are not adequate for evaluating the airborne concentration of thinners and other organic mixtures. 5. The evaporation rate of the thinners were compared to the theoretical equations of Hummel, Braun and Mackay. The Hummel and Braun methods were close to exposure index but Makay's showed an underestimated value. In order to see the accuracy of each three models, the SSE (Error Sum of Squares) calculated for Hummel's was 1.73, being the closest to the actual values. 6. Present ACGIH TLVs for mixtures are not appropriate evaluate industrial environments. In this study, a correction of TLVs using vapor pressure of respective components was suggested. In order to evaluate the corrected TLVs a paired t-test was performed. There was no significant difference between the exposure index and the concentration over suggested TLVs (p>0.05). Thus, this corrected TLVs seem appropriate in order to evaluate actual industrial workplaces organic chemical concentration in the air.

• 한국안광학회지
• /
• 제12권1호
• /
• pp.23-33
• /
• 2007

안구 조직에는 많은 양의 아연과 타우린이 존재하며 특히 망막에서 맥락막에 이르는 부위에서의 분포가 두드러지고, 이는 아연과 타우린이 이들 조직에서 중요한 역할을 담당하리라는 것을 시사한다. 또한 시각 감수성에 영향을 미치는 또 다른 인자로서, 온도에 대한 연구들이 보고되고 있다. 그러나 지금까지의 많은 연구에도 불구하고 시각 순응계에서의 이들의 기능이나 상호작용은 명확히 알려져 있지 않다. 본 연구에서는 변온동물의 일종인 황소개구리(bullfrog, Rana catesbeiana)의 안구를 이용하여 적정 농도의 아연과 타우린의 처리와 저온효과에 따른 망막전위도(ERG)와 흡수 스펙트럼의 변화를 관찰함으로써, 이들 인자들이 시각 감수성과 시각 순응에 미치는 효과를 알아보고자 하였다. 아연과 타우린의 효과를 알아보기 위한 이들의 적정 농도는 각각 10-4 M과 10-5 M로 결정하였고, 저온효과를 알아보기 위한 온도 변화 과정은'$25^{\circ}C {\rightarrow}0^{\circ}C{\rightarrow}25^{\circ}C$'를 거치게 하였다. 적정 농도의 아연과 타우린의 처리와 저온효과에 의해 망막전위도 실험 결과 역치(threshold)와 망막전위도 b-파의 크기가 증가하였고, 흡수 스펙트럼 분석 결과 400~750 nm 범위에서의 흡광도 증가를 볼 수 있었다. 또한 아연과 타우린, 그리고 아연과 저온효과 간에는 상승효과가 있음을 확인 할 수 있었다.

• 유기물자원화
• /
• 제5권2호
• /
• pp.39-45
• /
• 1997

카드뮴(Cd)에 대한 지렁이의 독성한계를 결정하고, 생물적 농축능력을 평가함으로써, 잠재적 독성 원소가 높은 유기성 폐기물의 안전한 처리를 위한 vermicomposting의 이용가능성을 검토하였다. 우분에 첨가한 카드뮴 함량은 0 (대조구), 50, 100, 200, 400, 800, 1600 mg/kg의 7수준 이였다. 우분내 카드뮴 함량의 차이에 따른 지렁이의 생존율, 사육종료시의 개체당 평균생체중, 증체율, 난포수, 산자수 및 잔식량에서는 유의한 차이가 인정되지 않아서, 우분내 카드뮴 함량이 1600mg/kg까지는 지렁이의 생육에 별다른 영향을 미치지 않는 것으로 판단되었다. 생육형질간의 상호관계를 살펴본 결과, 생존율과 난포수간에는 0.1% 수준의 유의성이 인정되었고, 실험종료시 평균생체중과 잔식량간에는 5% 수준의 유의한 부(-)의 상관이 인정되었다. 지렁이 체내의 카드뮴 축적량은 카드뮴 함량 956.8~1116.6 mg/kg범위에서 최대 축적량인 283.8~396.2 mg/kg을 나타낸 후 점차 감소하였다.

• 대한환경공학회지
• /
• 제28권3호
• /
• pp.292-299
• /
• 2006

전자공여체로 벤조산염을 이용한 perchloroethene(PCE)의 환원성 탈염소화 과정에서 전자공여체의 첨가량 및 초기 미생물 식종량이 탈염소화에 미치는 영향을 평가하기 위하여 회분식 실험을 수행하였다. 벤조산염이 탈염소화를 위한 양론비 이하(전자공여체/수용체 비=0.5와 1)로 첨가된 경우 탈염소화 효율은 벤조산염 첨가량이 증가함에 따라 71%에서 94.3%로 증가하였으나, 탈염소화에 이용된 전자공여체의 분율은 92.7%에서 79.6%로 감소하였다. 메탄생성은 PCE와 trichloroethene(TCE)가 모두 cis-1,2-dichloroethene(cDCE)으로 전환된 후 문턱농도(threshold value, 10 nM) 이상으로 수소농도가 유지되는 동안 진행되었다. 벤조산염이 양론비 이상으로 첨가된 경우 탈염소화 완료 후 잔존하는 수소는 메탄생성량을 증가시켰다. 식종 미생물량의 증가는 지체기를 감소시켰지만 최대 탈염소화 속도는 벤조산염 분해 속도에 의해 결정되어 식종 미생물량에 큰 영향을 받지 않았다. 식종 미생물 농도가 높은 경우 초기 활발한 탈염소화로 인하여 메탄생성량은 감소하고, 탈염소화 효율은 증가하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.200-200
• /
• 2010

In recent times, metal oxide semiconductors thin films transistor (TFT), such as zinc and indium based oxide TFTs, have attracted considerable attention because of their several advantageous electrical and optical properties. There are many deposition methods for fabrication of ZnO-based materials such as chemical vapor deposition, RF/DC sputtering and pulsed laser deposition. However, these vacuum process require expensive equipment and result in high manufacturing costs. Also, the methods is difficult to fabricate various multicomponent oxide semiconductor. Recently, several groups report solution processed metal oxide TFTs for low cost and non vacuum process. In this study, we have newly developed solution-processed TFTs based on Ti-related multi-component transparent oxide, i. e., InTiO as the active layer. We propose new multicomponent oxide, Titanium indium oxide(TiInO), to fabricate the high performance TFT through the sol-gel method. We investigated the influence of relative compositions of Ti on the electrical properties. Indium nitrate hydrate [$In(NO^3).xH_2O$] and Titanium isobutoxide [$C_{16}H_{36}O_4Ti$] were dissolved in acetylacetone. Then monoethanolamine (MEA) and acetic acid ($CH_3COOH$) were added to the solution. The molar concentration of indium was kept as 0.1 mol concentration and the amount of Ti was varied according to weighting percent (0, 5, 10%). The complex solutions become clear and homogeneous after stirring for 24 hours. Heavily boron (p+) doped Si wafer with 100nm thermally grown $SiO_2$ serve as the gate and gate dielectric of the TFT, respectively. TiInO thin films were deposited using the sol-gel solution by the spin-coating method. After coating, the films annealed in a tube furnace at $500^{\circ}C$ for 1hour under oxygen ambient. The 5% Ti-doped InO TFT had a field-effect mobility $1.15cm^2/V{\cdot}S$, a threshold voltage of 4.73 V, an on/off current ratio grater than $10^7$, and a subthreshold slop of 0.49 V/dec. The 10% Ti-doped InO TFT had a field-effect mobility $1.03\;cm^2/V{\cdot}S$, a threshold voltage of 1.87 V, an on/off current ration grater than $10^7$, and a subthreshold slop of 0.67 V/dec.