• Journal of Information Display
• /
• v.13 no.4
• /
• pp.159-166
• /
• 2012

In this paper, a display's emotional image quality can be primarily determined by designing the proper luminance level. Though displays with high luminance are preferred, too much light emission from a display may cause glare or visual fatigue to viewers. To find out the proper luminance level based on various video contents, this study was conducted with an OLED display with a real-black level and a wide color gamut, and with an LCD display with a high luminance level, to set the glare threshold under various conditions. The optimum luminance levels according to the display's loading ratio were found, and the maximum luminance that did not cause a glare in the test is proposed.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.4
• /
• pp.113-120
• /
• 2015

The objectives of this study were to monitor and assess the effects of saline irrigation water on lettuce and carrot growth in protected cultivation. One control and 4 treatments with three replications, which were differentiated according to the level of salinity in irrigated water, were employed for each vegetable to assess the effects of the irrigation with saline water. Monitoring results showed that the use of irrigation water containing above a certain level of salinity was found to cause excessive accumulation of salts in the soil as saline irrigation water increased electrical conductivity (EC) and sodium ($Na^+$) content in both lettuce and carrot soil samples, while tap water irrigation used as control decreased the salinity in the samples. The salinity higher than the threshold level of irrigation water was found to reduce the yields of lettuce and carrot, while in less than the threshold level the higher the salinity of the irrigation water increased the yields. The salinity of the irrigation water also appeared to increase the internal salinity of the plant as the $Na^+$ content in plant increased as the salinity of irrigation water increase. Increased $Na^+$ content was analyzed to be able to increase the sugar content in carrot. This study could contribute to suggest water quality criteria for safe use of saline water in protected cultivation, although long-term monitoring is needed to get more representative results.

• Journal of Environmental Science International
• /
• v.18 no.7
• /
• pp.781-796
• /
• 2009

The current standard level of Heat Health Watch Warning System consider both daily maximum temperature and daily maximum heat index(HI), but current standard could not consider daily maximum HI due to the difficulties in forecasting when we consider both daily maximum temperature and daily maximum HI and no considering HI because relative humidity could not observed for some regions. So, Newly established standard level of Heat Health Watch Warning System is based on daily maximum temperature exceeding $30^{\circ}C$ for two consecutive days or daily minimum temperature exceeding $25^{\circ}C$ and daily maximum temperature exceeding $30^{\circ}C$. These days are called "extreme heat days". On extreme heat days, the standard of extreme heat advisory is based on daily maximum temperature among exceeding $32.7^{\circ}C$ and not exceeding $34.8^{\circ}C$, and extreme heat warning is based on daily maximum temperature exceeding $34.8^{\circ}C$. ANOVA analysis was carried out using the data of Seoul Metropolitan City in 1994 to check the robustness of the new standard level of Heat Health Watch Warning System from this study, in particular for mortality variable. The results reveal that the new standard specifies excess mortality well, showing significance level of 0.05 in the difference of excess mortality for each phase.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.195-201
• /
• 2000

This paper discusses methods for the stable bottom detection and the optimum bottom offset which enable to separate the fish echoes from the bottom echoes with echo integration of demersal fish. In preprocessing of the echo signal, the bottom detection has to be done stably against the fluctuation of echo level and the bottom offset has to be set to a minimum height such that near bottom fish echoes are included Two methods of bottom detection, namely echo level threshold method and maximum echo slope method were compared and analyzed. The echo level method works well if the ideal threshold level was given but it sometimes misses the bottom because of the fluctuation of the echo. Another method to detect the bottom which uses maximum echo slope indicates the simple and stable bottom detection. In addition, the bottom offset has to be set near to the bottom but not to include the bottom echo. Optimum bottom offset should be set a few samples before the detected bottom echo which relates the beginning of pulse shape and acoustic beam pattern to the bottom feature.

• 대한예방의학회:학술대회논문집
• /
• 1994.02a
• /
• pp.681-691
• /
• 1994

The American Conference of Governmental Industrial Hygienists (ACGIH) has proposed a threshold limit value (TLV) for benzene of 0.1 ppm. Individuals representing the American Petroleum Institute (API)and the Chemical Manufacturers Association (CMA) have argued that 1) the risk assessment by Rinsky .et al. which ACGIH partially relied upon for its proposed TLV overestimates the risk; however, at the exposures levels of interest - (e.g., 0.1 to 1.0 ppm) for establishing a benzene TLV, the Rinsky et al. assessment provides lower estimates of leukemia risk than most others; 2) ACGIH should not use the Dow study for direct observational evidence of leukemia risk associated with low-level benzene exposure because of confounding exposure; however, it is unlikely that confounding exposures played a role in the excess of leukemia demonstrated in the study, and the Dow cohort was exposed to an average benzene concentration of about 5.5 ppm benzene for 7.11 years (31:1.5 ppm-years), while some of the individuals in the study who died from leukemia were exposed to an average of only 1.0 ppm without the opportunity for highpeak exposures; 3) the Occupational Safety and Health Administration (OSHA) established an 8-hour time-weighted average (TWA) of 1.0 ppm in 1987, and there is no new evidence that would justify reducing the TWA below that level; however, the OSHA TWA of 1.0 ppm was based on economic feasibility and the level of excess risk remaining at 1.0 ppm, i.e., 10 excess leukemia deaths per 1000 workers over an occupational lifetime (45 years) according to OSHA's preferred estimate leaves behind I risk considered significant by OSHA. In addition, chromosomal studies among workers and in animals exposed to benzene indicate that low-level exposure, i.e., 1.0 ppm, is associated with elevated Cytogenetic damage. On the basis of adverse health effects data alone, in this author's opinion, it would be poor science and poor public health policy to establish a benzene TLV greater than 0.1 ppm.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.17-25
• /
• 1997

The evoked potentials for concentrations of solutions of the four qualities of tastes(i.e., sweet, salty, sour, and bitter tastes) were measured. The solution was applied to the chorda tympani nerve located on the left side of the tongue at 20mm from the tip and 15mm left from the center line. The evoked potentials were detected from Cz referred to A1(left lobe) with the ground at the Fpz position. The Maximum potential level and its latency were evaluated. The individual threshold level of concentration of the solutions of four tastes were measured. Artificial saliva was used as a control solution. The evoked positive potentials for four qualities of tastes (i.e., gustatory evokde potentials) were found to be around 150ms by averaging eight responses. The arbitrary concentration of the solutions were presented by the relative concentration, which was the ratio of the arbitrary concentration to the individual threshold level. The characteristic relations between the latency and the relative concentration ;and those between the potential level and the relative concentration were evaluated. These evalutions showed that (1) the latencies for salty and bitter tastes denoted the minimum values due to for the change of relative concentration, and that (2) the latency for sour taste decreased as the relative concentrations increased, while the latency for sweet taste denoted the inverse tendency, Sinificant differences between any two maximum potential levels were not recognized. A response latencies to sucrose were abolished after treatment of tongue by a sweet-suppressing agent.

• Journal of the Korea Society for Simulation
• /
• v.17 no.3
• /
• pp.95-105
• /
• 2008

In this paper, we propose the DAMMC(Distributed Authentication Model using Multi-level Cluster) for wireless sensor networks. The proposed model is that one cluster header in m-layer has a role of CA(Certificate Authority) but it just authenticates sensor nodes in lower layer for providing an efficient authentication without authenticating overhead among clusters. In here, the m-layer for authentication can be properly predefined by user in consideration of various network environments. And also, the DAMMC uses certificates based on the threshold cryptography scheme for more reliable configuration of WSN. Experimental results show that the cost of generation and reconfiguration certification are decreased but the security performance are increased compared to the existing method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7C
• /
• pp.618-627
• /
• 2010

In this paper, we propose an adaptive K-best algorithm in which the number K of candidates is changed according to the differences of level radii. We also compare the bit error performance and complexity of the proposed algorithm with those of several conventional K-best algorithms, where the complexity is defined as the total number of candidates of which partial Euclidean distances have to be calculated. The proposed algorithm adaptively decides K at each level by eliminating the symbols, whose differences of radii are larger than a threshold, from the set of candidates, and the maximum or average value of differences can be adopted as the threshold. The proposed decoding algorithm shows the better bit error performance and the lower complexity than a conventional K-best decoding algorithm with a constant K, and also has a similar bit error performance and the lower complexity than other adaptive K-best algorithms.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.4 s.28
• /
• pp.474-479
• /
• 1989

This research was conducted to evaluate the effect of improvement in work environment and of segregation in a fluorescent lamp manufacturing factory. Among the total of 80 workers, 8 workers whose mercury concentration in urine reached a hazardous level ($200-299{\mu}g/l$) were moved to mercury free workplace. The follow-up examination for their mercury concentration in urine was done three times ; on May 3, 1988, September 1, 1988 and April 3, 1989. The results were as follows : 1. Mercury concentration in the air was reduced from 0.140 to 0.107 $mg/m^3$ in 4 months, and to $0.087mg/m^3$ in one year after environmental improvement in workplace. However the level still exceeded the Threshold Limit Value. 2. The geometric mean of urinary mercury concentration among 80 workers was $173.0{\mu}g/l\;(5.1{\sim}458.6{\mu}g/l$). The distribution of workers according to urinary mercury concentration showed that 9 workers (11.2%) were above the mercury poisoning level ($300{\mu}g/l$), 24 workers (30.0%) were $200-299{\mu}g/l$, 35 workers (43.8%) were $50-199{\mu}g/l$, and 12 workers (15.0%) were below 50 ${\mu}g/l$. 3. Among the 24 workers whose urinary mercury concentration was 200-299 $50-199{\mu}g/l$, 8 were able to be followed up. Their mean urinary mercury concentration before segregation was $244.9{\mu}g/l$, but decreased to $151.4{\mu}g/l$ in four months, $128.8{\mu}g/l$ in six months, and $46.8{\mu}g/l$ in one year after segregation.

• ETRI Journal
• /
• v.36 no.5
• /
• pp.799-807
• /
• 2014

In this paper, we design a rake-based cellular radar receiver (CRR) scheme to detect a moving target located in a multipath environment. The modules of Doppler filter banks, threshold level test, and target detection module are newly introduced into the conventional rake receiver so that it can function as a radar system. The proposed CRR tests the Doppler-shift frequency and signal-to-noise ratio of the received signal against predefined threshold levels to determine detection and then calculates target velocities and ranges. The system performance is evaluated in terms of detection probability and the maximum detection range under a Nakagami-n channel that reflects the multipath environment.