• Advances in materials Research
• /
• 제8권2호
• /
• pp.117-135
• /
• 2019

The lifetime of a gas turbine combustor is typically limited by the durability of its liner, the structure that encloses the high-temperature combustion products. The primary objective of the combustor thermal design process is to ensure that the liner temperatures do not exceed a maximum value set by material limits. Liner temperatures exceeding these limits hasten the onset of cracking which increase the frequency of unscheduled engine removals and cause the maintenance and repair costs of the engine to increase. Hot gas temperature prediction can be considered a preliminary step for combustor liner temperature prediction which can make a suitable view of combustion chamber conditions. In this study, the temperature distribution of ceramic panels for a V94.2 gas turbine combustor subjected to realistic operation conditions is presented using three-dimensional finite difference method. A simplified model of alumina ceramic is used to obtain the temperature distribution. The external thermal loads consist of convection and radiation heat transfers are considered that these loads are applied to flat segmented panel on hot side and forced convection cooling on the other side. First the temperatures of hot and cold sides of ceramic are calculated. Then, the thermal boundary conditions of all other ceramic sides are estimated by the field observations. Finally, the temperature distributions of ceramic panels for a V94.2 gas turbine combustor are computed by MATLAB software. The results show that the gas emissivity for diffusion mode is more than premix therefore the radiation heat flux and temperature will be more. The results of this work are validated by ANSYS and ABAQUS softwares. It is showed that there is a good agreement between all results.

• 융합보안논문지
• /
• 제19권2호
• /
• pp.137-146
• /
• 2019

본 연구는 NCS 의사소통능력과 부사관과 의사소통 교육의 연관성을 규명하여 교육목표와 성취 수준에 대하여 고찰하고 이에 적합한 자료통합적 문서 교육에 대하여 살펴보고자 한다. 부사관과 의사소통 교육의 목표는 실질적인 부사관의 의사소통 상황과 연관성을 지닌 문서이해능력과 문서작성능력을 함양하는 것이며 이에 대한 '중' 이상의 성취 수준을 달성하는 것이다. 교육구성은 부사관과의 특성을 고려하여 하위능력 요소에 따른 주차별 세부사항으로 설계하여 교육목표와 수준을 달성하도록 구성하였다. 이에 적합한 부사관과 자료통합적 문서 교육은 문서의 주제제시-팀 활동-최종활동보고서 제출이라는 3단계로 이루어지며 지속적인 평가지를 작성하여 성취 수준을 확인할 수 있도록 구성하였다. 자료통합적 문서 교육은 NCS의 중요성이 강조되는 시점에서 NCS와 연계된 부사관과의 의사소통 교육방안을 제시한 것이다. 앞으로 부사관과 학생들의 문서작성 역량 향상을 모색할 수 있는 다양한 논의가 진행되기를 기대한다.

• 한국추진공학회지
• /
• 제23권4호
• /
• pp.61-69
• /
• 2019

세 가지 다른 온도($60^{\circ}C$, $70^{\circ}C$ 그리고 $75^{\circ}C$)에서 1년 동안 복기추진제의 가속 노화 시험을 수행하였다. 추진제의 노화 특성을 평가하기 위해 고성능 액체크로마토그래피(HPLC)와 AKTS-Thermokinetics 소프트웨어를 사용하여 안정제 함량과 속도론적 분석을 수행하였다. 그 결과, 추진제의 안정제 함량은 노화 온도 및 노화 기간에 따라서 점차적으로 감소하였다. $75^{\circ}C$에서의 안정제 감소 속도는 $70^{\circ}C$와 비교하여 약 2배 정도 빠른 것으로 나타났다. 이러한 실험값들을 속도론적 SB 모델과 2단계 모델로 모사하였고, n1=1, n2=0에서 실제데이터를 가장 잘 모사하였다.

• 한국산업융합학회 논문집
• /
• 제21권6호
• /
• pp.265-271
• /
• 2018

DC-DC buck converter is a critical building block in the power management integrated circuit (PMIC) architecture for the portable devices such as cellular phone, personal digital assistance (PDA) because of its power efficiency over a wide range of conversion ratio. To ensure a safe operation, avoid unexpected damages and enhance the reliability of the converter, fully-integrated protection circuits such as over voltage protection (OVP), under voltage lock out (UVLO), startup, and thermal shutdown (TSD) blocks are designed. In this paper, these three fully-integrated protection circuit blocks are proposed for use in the DC-DC buck converter. The buck converter with proposed protection blocks is operated with a switching frequency of 1 MHz in continuous conduction mode (CCM). In order to verify the proposed scheme, the buck converter has been designed using a 180 nm CMOS technology. The UVLO circuit is designed to track the input voltage and turns on/off the buck converter when the input voltage is higher/lower than 2.6 V, respectively. The OVP circuit blocks the buck converter's operation when the input voltage is over 3.3 V, thereby preventing the destruction of the devices inside the controller IC. The TSD circuit shuts down the converter's operation when the temperature is over $85^{\circ}C$. In order to verify the proposed scheme, these protection circuits were firstly verified through the simulation in SPICE. The proposed protection circuits were then fabricated and the measured results showed a good matching with the simulation results.

• 대한치과교정학회지
• /
• 제49권2호
• /
• pp.97-105
• /
• 2019

Objective: This study was performed to evaluate the accuracy and reliability of a newly designed method to achieve mandibular dental model superimposition, using voxel-based cone-beam computed tomography (CBCT) registration. Methods: Fourteen dry cadaveric mandibles and six teeth extracted from patients with severe periodontitis were used to establish 14 orthodontic tooth-movement models. The protocol consisted of two steps: in the first step, voxel-based CBCT mandible superimposition was performed; the reference comprised the external portion of the symphysis, extending to the first molar. The laser-scanned dental model image was then integrated with the CBCT image to achieve mandibular dental model superimposition. The entire process required approximately 10 minutes. Six landmarks were assigned to the teeth to measure tooth displacement, using tooth displacement on the superimposed laser-scanned mandibles as the reference standard. Accuracy was evaluated by comparing differences in tooth displacement based on the method and the reference standard. Two observers performed superimposition to evaluate reliability. Results: For three-dimensional tooth displacements, the differences between the method and the reference standard were not significant in the molar, premolar, or incisor groups (p > 0.05). The intraclass correlation coefficients for the inter- and intra-observer reliabilities of all measurements were > 0.92. Conclusions: Our method of mandibular dental model superimposition based on voxel registration is accurate, reliable, and can be performed within a reasonable period of time in vitro, demonstrating a potential for use in orthodontic patients.

• Animal Bioscience
• /
• 제34권8호
• /
• pp.1283-1289
• /
• 2021

Objective: The progestogen-associated endometrial protein (PAEP) gene encodes the main whey protein in milk, β-lactoglobulin. The aim of the study was to investigate polymorphism in the PAEP gene and its association with milk yield, composition, and quality. Methods: Test-day records for 782 dairy cows were analysed. A total of 10 single nucleotide polymorphisms (SNP) within the PAEP gene were investigated. The following parameters were recorded: milk yield (MY, kg/d), percent milk fat (%), protein (PP, %), dry matter (DMP, %) and lactose (LP, %), urea content (UC, mg/L) as well as natural logarithm for somatic cell count (LnSCC, ln). Effect on genomic estimated breeding values accuracy was evaluated with pedigree and single step model. Results: Results show that only three SNPs were polymorphic, creating 5 composite genotypes: P1 to P5. Differences in MY between composite genotypes were noted in the two tested herds. Cows with P5 composite genotypes were characterised by the highest PP and LnSCC and the lowest LP and UC (p<0.05). P4 was linked to an increased DMP and UC, while P3 to an increase in LP and decrease in PP and LnSCC. Both factors are important markers in herd management and have high influences on the herds economics. For 5 out of 7 traits the accuracy of prediction was improved by including the haplotype as a fixed effect. Conclusion: Presented results may suggest a new way to optimise breeding programmes and demonstrate the impact of using genomic data during that process.

• 한국IT서비스학회지
• /
• 제20권5호
• /
• pp.89-104
• /
• 2021

Food delivery service combined with IT technology and HMR (Home Meal Replacement) are rapidly growing due to the COVID-19. Recently, the demand for salads along with HMR has increased among office workers in their 20s and 30s who are interested in health and beauty. Freshcode is a food startup with 6 years of experience that started selling salad products through O2O service. Freshcode applied for a patent for a service that collects orders from nearby areas and delivers them on the same day to a designated delivery address 'FCOSPOT' to save shipping costs. In March 2021, in recognition of the growth potential of the regular delivery service, Freshcode received an investment of 6 billion won in Series A. This study may have practical implications to early-stage startups and scale-up stage startups through a longitudinal case study on the growth of a single company. As for the research method, the lean startup methodology and lean canvas were used in the early stage of startup. In particular, the process of the build-measure and learn feedback-loop, which is the core of lean startup methodology, was applied to each major decision-making step. In the scale-up stage after 5 years, the business model canvas was used to schematize the growth as a food online O2O platform to verify continuous innovation. This case study has three main findings. First, the idea of 'FCOSPOT' was successfully implemented through the Lean Startup methodology. Second, Freshcode demonstrated the scalability of the differentiated business model of shared base delivery O2O. Third, a key factor of success was the digital integrated communication operation strategy that maximizes the experience for the created customers.

• Smart Structures and Systems
• /
• 제29권1호
• /
• pp.129-140
• /
• 2022

The effectiveness of system identification, damage detection, condition assessment and other structural analyses relies heavily on the accuracy and reliability of the measured data in structural health monitoring (SHM) systems. However, data anomalies often occur in SHM systems, leading to inaccurate and untrustworthy analysis results. Therefore, anomalies in the raw data should be detected and cleansed before further analysis. Previous studies on data anomaly detection mainly focused on just single type of data anomaly for denoising or removing outliers, meanwhile, the existing methods of detecting multiple data anomalies are usually time consuming. For these reasons, recognising multiple anomaly patterns for real-time alarm and analysis in field monitoring remains a challenge. Aiming to achieve an efficient and accurate detection for multi-type data anomalies for field SHM, this study proposes a pattern-recognition-based data anomaly detection method that mainly consists of three steps: the feature extraction from the long time-series data samples, the training of a pattern recognition neural network (PRNN) using the features and finally the detection of data anomalies. The feature extraction step remarkably reduces the time cost of the network training, making the detection process very fast. The performance of the proposed method is verified on the basis of the SHM data of two practical long-span bridges. Results indicate that the proposed method recognises multiple data anomalies with very high accuracy and low calculation cost, demonstrating its applicability in field monitoring.

• 대한본초학회지
• /
• 제38권2호
• /
• pp.35-41
• /
• 2023

Objectives : Washing face is the first step in skin beauty and health. I wanted to study the cleansing effect by using Placenta cp (cold process) soap. The skin condition is greatly influenced by the external environment such as lifestyle, drinking, smoking, and stress etc. I tried to measure the skin change state without environmental factors. Methods : In order to examine the effect before and after washing face under the same conditions, the same water and towel were used in the same place. The skin test was performed before and 10 minutes after washing. As a control group, a case of washing with water and foam cleanser. I compared and analyzed three cases: water washing, F/C (foam cleanser) washing, and Placenta cp soap washing. Results : In the case of water washing, it was significantly reduced in pores and increased in facial temperature. In the case of F/C washing, the facial temperature was significantly increased, but the decrease in moisture. In the case of washing with Placenta cp soap, significant reductions in T-zone and U-zone oil content, reduction in pore size, and increase in facial skin temperature were observed. Conclusion : In the case of Placenta cp soap, it is thought to be suitable for oily skin type, because of significant decrease in T-zone and U-zone oil content. It is thought to have the effect of increasing blood circulation in the facial skin and to reduce pores for oily skin types.

• 센서학회지
• /
• 제32권2호
• /
• pp.110-117
• /
• 2023

Reconstructing underwater geometry in real time with forward-looking sonar is critical for applications such as localization, mapping, and path planning. Geometrical data must be repeatedly calculated and overwritten in real time because the reliability of the acoustic data is affected by various factors. Moreover, scattering of signal data during the coordinate conversion process may lead to geometrical errors, which lowers the accuracy of the information obtained by the sensor system. In this study, we propose a three-step data processing method with low computational cost for real-time operation. First, the number of data points to be interpolated is determined with respect to the distance between each point and the size of the data grid in a Cartesian coordinate system. Then, the data are processed with a nonlinear interpolation so that they exhibit linear properties in the coordinate system. Finally, the data are transformed based on variations in the position and orientation of the sonar over time. The results of an evaluation of our proposed approach in a simulation show that the nonlinear interpolation operation constructed a continuous underwater geometry dataset with low geometrical error.