• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.9-12
• /
• 2003

This paper describes a step-by-step method to minimize design iterations in a process of product design change. In the design process, two components are coupled if a change of a component can require the other components change, and design iterations are generated by the coupling. The design iteration is one of main factors that increase design effort. In this study, three matrices are used to solve the design iteration of automatic transmission lever, Requirement-Engineering matrix, Engineering-Components matrix, and DSM(Design Structure Matrix). Firstly, with the DSM, the product architecture and conceptual design process are proposed from product function analysis. Secondly, with the QFD, the Requirement-Engineering matrix and Engineering-Components matrix present the relationship among customer requirements, engineering issues, and product components. Lastly, the results of the QFD analysis are used in the DSM to solve the component interactions and to provide design

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.11a
• /
• pp.120-126
• /
• 2004

The failure modes analysis by the real process method at the head section of rubble mound breakwaters is more important than other failure modes analysis. because this initial failure modes and failure process will lead to the destruction of the structure. The three-dimensional failure modes are discussed using the experimental data with directional waves considering the failure modes. It was processed step by step failure around the head of rubble mound breakwaters. The spacial characteristics of failure mode by real process analysis was well descript at the rubble mound structures.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.4
• /
• pp.597-603
• /
• 1999

Even though the development of livestock industry in Asia and Australasia has brought the economic growth and thus elevated the living standard in these areas, it has also brought the pollution caused by the increasing amount of animal wastes. Among them, Japan probably is the first country that suffered from the animal waste pollution as early as in 1970s. Nowadays, the animal waste pollution has been a common problem for almost every countries in this region. To solve it, different measures and regulations have been implemented in many countries. In this paper, different methods for animal waste disposal are discussed, including: manure-bed animal housing, composting, anaerobic treatment, odor control, utilization of biogas, aerobic treatment, three-step process, N and P removal, land application, cultivation of algae, anaerobic treatment of dead animals. It is hoped that an animal industry without pollution can be achieved in the future.

• Journal of Information Processing Systems
• /
• v.17 no.4
• /
• pp.772-786
• /
• 2021

The process of tracking suspicious behavior manually on a system and gathering evidence are labor-intensive, variable, and experience-dependent. The system logs are the most important sources for evidences in this process. However, in the Microsoft Windows operating system, the action events are irregular and the log structure is difficult to audit. In this paper, we propose a model that overcomes these problems and efficiently analyzes Microsoft Windows logs. The proposed model extracts lists of both common and key events from the Microsoft Windows logs to determine detailed actions. In addition, we show an approach based on the proposed model applied to track illegal file access. The proposed approach employs three-step tracking templates using Elastic Stack as well as key-event, common-event lists and identify event lists, which enables visualization of the data for analysis. Using the three-step model, analysts can adjust the depth of their analysis.

• Journal of Environmental Science International
• /
• v.23 no.11
• /
• pp.1919-1927
• /
• 2014

In order to decide the location of appropriate onshore wind farm with higher potential wind energy, several decision processes using Geographic Information System (GIS) including Digital Elevation Map (DEM) were proposed and we also estimated the wind resources through the proposed decision process. Decision process consists with three steps. First step is excluding inappropriate location geographically using DEM data including SRTM (Shuttle Radar Topography Mission) terrain data, landslide, land-use, roadway, and forest road data. And the second step of decision process is consideration of the difficulty caused by the natural environmental problem. This step is carried out using ECVAM (Environmental Conservation Value Assessment Map) data. And final step is determination of the most suitable location through the Moving Suitability Identification Method (MSIM) based on the moving potentially estimated wind resources area. Proposed decision process was applied over the Korean Peninsula. Wind resource potential estimated by the first and the second step is cases shows 35.09 GW and 7.17 GW, respectively, and the total evaluated energy from the all proposed step were 0.43 GW and 1.87 GW for the 3 km and 1.5 km geographical grid size, respectively.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.11
• /
• pp.1093-1101
• /
• 2007

This study presents the design improvement process for door module. Its objective evades the resonance generated at module plate due to the operation of window regulator motor. For this study, the design improvement process is composed of experimental methods having three steps. First step is modal analysis at door assembly status for acquisition of dynamic characteristics which are modal frequency and damping. Second step is a vibration experiment to get the test mode considered an efficiency of window regulator motor. Last step is a vibration measurement by the form of $6{\times}6$ array on module plate. A vibration measurement of $6{\times}6$ array form can be got to three analysis results which are a transfer path of vibration using cross correlation function, a vibration map using OA level and a contribution by frequency band using coherent output power spectrum on module plate. These results are applied to SDM(structural dynamic modification) for design improvement to get around the resonance on module plate by the excitation of window regulator motor.

• Design & Manufacturing
• /
• v.10 no.1
• /
• pp.26-30
• /
• 2016

In this study, it was investigated by comparing the experimental hemming by the 3 steps and 2 steps in order to stabilize the quality of the hemming process. In the experimental results, the three-step hemming superior to the two-step one and the dimensional stability of part that was made by the three-step on was high. When the second stage Hemming has been found that the deflection caused by the force to the wear of the punch becomes larger plane can be folded by the hemming crimping and crimp uncertain.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.139-149
• /
• 2007

Asynchronous OFCDM(Orthogonal Frequency and Code Division Multiplexing) systems must have a cell search process necessarily unlike synch개nous systems. this process is hewn initial synchronization and a three-step cell search algorithm is performed for the initial synchronization in the following three steps: OFCDM symbol timing, i.e., Fast Fourier Transform(FFT) window timing is estimated employing guard interval (GI) correlation in the first step, then the frame timing and CSSC(Cell Specific Scrambling Code) group is detected by taking the correlation of the CPICH(Common Pilot Channel) based on the property yielded by shifting the CSSC phase in the frequency domain. Finally, the CSSC phase within the group is identified in the third step. This paper proposes a modification group code with two or three block of the conventional CPICH based cell search algorithm in the second step which offers MS(Mobile Station) complexity reductions. however, the effect of the reduction complexity leads to degradation of the performance therefore, look for combination to have the most minimum degradation. the proposed block type group code with suitable combinations is the nearly sane performance as conventional group code and has a complexity reduction that is to be compared and verified through the computer simulation.

• 한국연소학회:학술대회논문집
• /
• 2007.05a
• /
• pp.155-160
• /
• 2007

This study was conducted to find out the chlorine removal characteristics of waste plastic mixture by pyrolysis process with thermogravimetric analysis(TGA) and a lab-scale pyrolyzer. The material used as plastic wastes were PE (Poly-ethylene), PP (Poly-prophylene), and PVC (Poly Vinyl Chloride). Experimental procedure were composed of three steps; 1st step: TGA of PVC, PP and PE, 2nd step: chlorine removal rate of PVC in a lab-scale pyrolyzer, 3rd step: chlorine removal rate of PVC-PE and PVC-PP mixture in a pyrolyzer. Through the results of TGA, we can estimate the basic pyrolysis characteristics of each plastic, and then we can also derive the design parameters and operating conditions of the lab-scale pyrolyzer. The results can be used as primary data for designing a system to produce RPF (Refuse Plastic Fuel), a waste incinerator and a pyrolysis/gasification process.

• 연구논문집
• /
• s.23
• /
• pp.45-56
• /
• 1993

In order to acquire more comprehensive understanding of textile composites, the processing-microstructure-performance relationships for a variety of material systems, reinforcing schemes and processing technologies should be established. In this paper, emphasis is placed on the integrated analysis of three-dimensional (3-D) 2-step braided composites. The analysis includes the geometric model of unit cells, identification of key process parameters and processing windows due to limiting geometries of yarn jamming, and prediction of elastic constants of the composite. The coordinate transformation and averaging of stiffness and compliance constants are utilized in the prediction of elastic constants. Since there are several types of unit cells in the thickness and width directions of the composites, characterization of mechanical properties is based upon the macro-cell, which occupies the entire cross-section and the unit pitch length of the sample. The performance map demonstrates that a wide range of elastic properties can be achieved by varying the geometric and process parameters.