• 한국간호교육학회지
• /
• 제23권1호
• /
• pp.108-117
• /
• 2017

Purpose: The purpose of this study is to determine the types and characteristics of male college nursing students' adaptation to their academic department. Methods: Q methodology was applied to determine the subjectivity of the male nursing students' adaptation to their academic department. Fifty male nursing students were asked to select and answer questions among a set of 36 Q-statements using a 9-point scale. The collected data were analyzed using the PC QUANL program. Results: Three types of male students' adaptation to the department of nursing were identified. Type I was termed 'resilience-acceptance', Type II, 'inner-conflict', and Type III, 'goal-oriented'. Conclusion: The study results can be used as the basic data needed to develop nursing interventions suitable to the types of male college nursing students' adaptation to their academic department.

• East Asian mathematical journal
• /
• 제34권4호
• /
• pp.451-462
• /
• 2018

This study analyzed the learning components of the web-based adaptive math learning programs in order to develop adaptive math learning program using artificial intelligence. The components of the web-based adaptive math learning program set for analysis are classified into learning process presentation, concept learning, problem presentation, problem solving process, and learning result processing then analyzed three programs. As a result of analysis, the typical characteristic of components is that it uses a method of repeatedly presenting the same type of problem in order to learn one concept.

• 대한수학회지
• /
• 제42권3호
• /
• pp.499-516
• /
• 2005

We obtain the type set for the fractional integral operator along the curve $(t,t^2,\;{\alpha}t^3)$ on the three dimensional Heisenberg group when $\alpha\neq{\pm}1/6$. The proof is based on the Fourier inversion formula and the angular Littlewood-Paley decompositions in the Heisenberg group in [5].

• Bulletin of the Korean Chemical Society
• /
• 제14권4호
• /
• pp.476-480
• /
• 1993

The ab initio calculations were performed on ClO and $ClO^+$ using the configuration interaction and M${\phi}$ller-Plesset methods of several different levels of approximation. Three different basis sets, 66 contracted Gaussian-type orbitals,6-31$G^*$ and 6-311$G^*$, were employed in this calculation. The results of calculation were compared with the experimental values of ClO. The values from the calculation with 66cGTO basis set gave excellent agreement with the experimental values. The spectroscopic constants of $ClO^+$ were also predicted.

• 천문학회지
• /
• 제37권4호
• /
• pp.143-149
• /
• 2004

We present photometric results for four new variable stars discovered in the vicinity of the ZZ Ceti-type pulsating white dwarf BR Cam. Observations were performed on 5 nights in November 2003 using the 1.8m telescope at Bohyunsan Optical Astronomy Observatory with no filter, on 3 nights in December 2003 using the 0.61m telescope at Sobaeksan Optical Astronomy Observatory with V, I filters, and on 3 nights in October 2004 using the 1.0m telescope at Mt. Lemmon Optical Astronomy Observatory with V, I filters. We estimated their periods from the phase-match technique for one eclipsing binary and the multiple frequency analysis for three pulsating stars. By considering the light curve shape, period and amplitude difference between two passbands, we classified the objects by their variability types as follows: V1 (USNO-A2.0 1425-05691757) is a W UMa-type eclipsing binary with an orbital period of $0^d.4641$; V2 (USNO-A2.0 1425-05703335) is a multi-periodic $\delta$ Set-type pulsating star with a dominant period of $0^d.0649$; V3 (USNO-A2.0 1425-05699659) is also a $\delta$ Set-type pulsating star with a period of $0^d.1408$; and V 4 (USNO-A2.0 1425-05707705) is a RR Lyr-type pulsating star with a period of $0^d.2643$.

• Journal of Biosystems Engineering
• /
• 제7권2호
• /
• pp.72-85
• /
• 1983

Rice whitening is performed by basically two different whitening actions known as abrasive and frictional. The former adopted in the emery stone abrasive type whiteners and the latter in the jet-air friction type. Comparative milling yields and whitening efficiencies between the whitening system consisting of jet-air friction type whiteners only and the system consisting of both abrasive- and jet-air friction-types have not yet been rigorously defined. This study was to examine the effect of combined operations of abrasive- and jet-air friction-type rice whiteners on milling yields and whitening efficiencies. The small capacity commercial units of the abrasive- and friction-type whiteners were used for the experiments. The combinations of whitening treatments were: 1) Once in the abrasive type and then two to three times in the friction type, 2) twice in the abrasive and then two to three times in the friction type and 3) three to five times in friction type. In these tests, counter pressures for the friction type whiteners were established differently as required to get about the same degree of whitening at the end of predetermined numbers of the repeated operations. The speed of emery stone and the slot angle of the screen were also the factors varied in the abrasive type whitener. Sheukwang rice variety having 13.05% M.C. was used in the tests. The dependent variables were the milled- and head-rice recoveries and electricity consumption. The results of the study are summarized as follows: 1. It was found that in the whitening systems consisting of abrasive- and friction-type whiteners slot angle of the screen, the rotational speed of emery stone roller had significant effect on the milling yields and whitening efficiency. In general, the increase of the emery stone roller speed from 690 to 950 rpm presented a positive effect on milling yield, and one-pass abrasive milling combinations had higher milling yields than two-pass abrasive milling combinations. 2. It was apparent that if the slot angle of the screen and the speed of emery stone roller are modified and set at an optimum level, the combination whitening system consisting of abrasive- and friction-type whiteners is better than the pure frictional whitening system consisting of jet-air friction type in terms of milling yields and efficiencies. 3. In the rice whitening system consisting of abrasive- and jet-air friction-type whiteners, the best whitening performance was obtained when the slot angle of the screen and the rotational speed of emery stone roller were $45^{\circ}$ and 950rpm, respectively, for the one-pass abrasive milling combinations. However, for the two-pass abrasive mi11ing combinations, the best performance was obtained with $75^{\circ}$ of slot angle and 950 rpm of the emery stone roller speed. 4. As compared with pure frictional whitening systems, the combination systems produced more milled rice by 0.8-1.0% point and more head rice by 0.5-1.5% point, and consumed less electricity by 0.15-0.20 KwH per 100kg of milled rice when the abrasive whiteners were operated in the modified conditions as described in item 3 above. Further study is recommended to find out optimum operational and design conditions of abrasive type whiterners.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.892-897
• /
• 2007

This paper presents the output filter design and the output characteristic analysis by cut-off frequency set up of the LCR filter on NPC multi-level inverter with trap-filter. The single-phase NPC three-level inverter operates at low switching frequency. The proposed LC trap filter is comprised of a conventional LCR output filter, by using LC trap filter the need for high damping resistor and low LC cut-off frequency is eliminated. Also. low damping resistor is increased the output filter system. The multilevel inverter system used NPC type inverter in proper system for high power application and controller is used DSP(TMS320C31). The effectiveness of proposed system confirmed the validity through SPICE simulation and experimental results.

• 산업경영시스템학회지
• /
• 제20권43호
• /
• pp.277-285
• /
• 1997

In this paper, the definition to flexibility is examined through the literature and re-classified to set up an evaluation model. Flexibility is classified into three categories to find the flexibility types for evaluation. The flexibility type called as manufacturing flexibility is defined and a model is developed to make the performance evaluation possible, The manufacturing flexibility has a heavy relationship to the machine flexibility; and 5 flexibility types out of 8 have relationship to the machine flexibility. This indicates that it is possible to have a pretty good evaluation measure if the machine flexibility related types could be evaluated using a model. There are four different inter-arrival times in the model. A big time saving is observed if the processing time is set equal to 72 second. This indicates that a flexibility affects the system a lot if the inter-arrival time is close to the processing time. The model used in this paper includes multi-processes in a production line with machine failure. However, development of realistic models with buffer between processes and some of the flexibility types not included in this model are remained for further research.

• 무역학회지
• /
• 제43권4호
• /
• pp.177-217
• /
• 2018

벤처기업이 내부자원의 부족함에도 불구하고 신속한 국제화를 이루는 현상에 대해, 벤처기업의 국제화 전략을 유형화하고 이러한 유형과 국제화 성과 간에 유의한 관계가 있는지를 검토하는 것이 본 연구의 목적이다. 유형화의 기준으로서 국제화를 수행하는 벤처기업의 글로벌 창업가정신과 실현화역량을 설정하고, 이를 기준으로 세 가지 유형이 존재하는 모델이 구성되었다. 그에 대한 유형별 특성과 국제화 전략의 내용에 대해서 설명하며 그에 대한 실증적 분석으로서 군집분석이 행해졌다. 각 유형별로 국제화 성과에서의 유의한 차이가 있는지에 대해서도 실증분석 하였다. 군집분석의 결과 개척자형과 신중한 준비형, 그리고 소극적 반응형의 세 가지 유의한 유형이 존재하는 것으로 결론을 내렸다. 또한 해외지명도와 지식·경험의 제고라는 국제화 성과에서는 각 유형 간에 부분적으로 혹은 완전한 정도로 유의한 차이가 나타났다. 따라서 국제화 전략포지션에 따른 유형별 차이와 성과 차이가 존재함을 의미하며, 벤처기업의 국제화 전략과 지원정책의 수립에서 이를 감안해야 할 것으로 판단된다.

• 패션비즈니스
• /
• 제17권6호
• /
• pp.141-157
• /
• 2013

In this study, we analyzed the figure type and lower-body size of Shanghai and Hong Kong adult women in their early twenties using the data obtained from 3D whole body scanners. We also provided concrete information related to women's lower bodies, in terms of crotch width, crotch length, inseam, outseam, slope of waist, etc., among women in Shanghai and Hong Kong. The result may be useful to the Chinese apparel industry when designing trouser pants for adult women. According to the results of the factor analysis for categorizing the body shape of the lower half, 5 factors were obtained: obesity of the lower half factor, height of the lower half factor, length from waist to the crotch factor, factor related to legs, and shape of the abdomen factor. After performing a cluster analysis according to the factor analysis, three clusters were set: Cluster 1 was represented as the lower half growth type, which has a high value in height of the lower half factor and grows in the abdomen part. Cluster 2 was represented as thin legs type, which has a low value in most part compared to the length of leg bones and factors about legs that have high value. Cluster 3 was represented as the obesity type having a high value in the obesity of the lower half factor. Overall, thin legs type achieved a high rate in Shanghai adult women and obesity type received a high rate in adult women living in Hong Kong.