• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.7
• /
• pp.750-755
• /
• 2003

This paper proposes a new three-line balun. The equivalent circuit of the proposed three-line balun is presented, and impedance matrix［Z］of the equivalent circuit is derived from the relationship between the current and voltage at each port. The design equation for a given set of balun impedance at input and output ports is presented using［S］parameters, which is transferred fom impedance matrix,［Z］. To demonstrate the feasibility and validity of design equation, multi-layer ceramic(MLC) chip balun operated in the 2.4 GHz ISM band frequency is designed and fabricated by the use of the low temperature co-fired ceramic(LTCC) technology. By employing both the proposed new three-line balun equivalent circuit and multi-layer configuration provided by LTCC technology, the 2012 size MLC balun is realized. Measured results of the multi-layer LTCC three-line balun match well with the full-wave electromagnetic simulation results, and measured in band-phase and amplitude balances over a wide bandwidth are excellent. This proposed balun is very easily applicable to multi-layer structure using LTCC as shown in the paper, and also can be realized with microstrip lines on PCB. This distinctive performance is very favorable for wireless communication systems such as wireless LAN(Local Area Network) and Bluetooth applications.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.285-288
• /
• 2008

The Present Study describes the numerical investigations concerning a fuel(Hydrogen), inert gas (Nitrogen) or supersonic air stream issued between each other. The basic flow configuration consists of a plane, double shear/mixing layer flow. For the numerical solution, a fully conservative unsteady $2^{nd}$ order time accurate sub-iteration method and a $2^{nd}$ order Total Variation Diminishing(TVD) scheme are used with the finite volume method(FVM). The results are consist of three categories ; single shear layer consist of fuel and supersonic air stream, inert gas stream issued between supersonic air and fuel stream, fuel gas stream issued between supersonic air and fuel stream. The numerical calculations has been carried out in case of 1,2, and 4mm thickness of center stream. The width of total gas stream is 4cm.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.3
• /
• pp.325-338
• /
• 2015

Experimental and numerical investigations were conducted to identify the wake characteristics downstream of two vane-type vortex generators over laminar flat plate boundary layer. Experimental study was carried out by using the stereoscopic particle image velocimetry. To describe the flow field around the vortex generator in detail, numerical study was performed. We considered two different planform shapes of vortex generator: triangular and rectangular shape. The height of the generator was chosen to be about the boundary layer thickness at the position of its installation. Two different lengths of the generator were chosen: two and five times the height. Wake measurements were carried out at three angles of attack for each configuration. Wake characteristics for each case such as overall vortical structure, vorticity distribution, and location of vortex center with downstream distance were obtained from the PIV data. Wake characteristics, as expected, were found to vary strongly with the geometry and angle of attack so that no general tendency could be deduced. Causes of this irregular tendency were explained by using the results of the numerical simulation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.1
• /
• pp.9-17
• /
• 2015

The basic flow configuration is composed of a plane, double shear layer where relatively thin mid gas layer is sandwiched between air and fuel stream. The present study describes numerical investigations concerning the combustion enhancement according to a variation of mid layer thickness. In this case, the effect of heat release in turbulent mixing layers is important. For the numerical solution, a fully conservative unsteady $2^{nd}$ order time accurate sub-iteration method and $2^{nd}$ order TVD scheme are used with the finite volume method including k-${\omega}$ SST model. The results consists of three categories; single shear layer consists of fuel and air, inert gas sandwiched between fuel and air, cold fuel gas sandwiched between fuel and air. The numerical calculations has been carried out in case of 1, 2, 4 mm of mid layer thickness. The height of total gas stream is 4 cm. The combustion region is broadened in case of inert gas layer of 2, 4 mm thickness and cold fuel layer of 4 mm thickness compared with single shear layer.

• Journal of Information Display
• /
• v.11 no.3
• /
• pp.119-122
• /
• 2010

This paper proposes a transflective liquid crystal display (LCD) in a whole-pixel switchable configuration with a high aperture ratio using an electrophoretic particle layer (EPL). The switchable transflective LCD consisted of the liquid crystal layer as a display unit, and the EPL as a switchable mirror. The switching of the EPL between the mirror for the reflective mode and the transparency for the transmissive mode was performed by controlling electrophoretic nanoparticles with an applied voltage in a three-electrode structure. The single pixel was used as the whole transmissive or reflective mode that corresponded to the switchable EPL mirror. Thus, a transflective LCD with a high aperture ratio was obtained.

• Advances in nano research
• /
• v.13 no.5
• /
• pp.427-435
• /
• 2022

Static stability behaviors of annular sandwich plates constructed from two layers of particle-reinforced nanocomposites have been investigated in the present article. The type of nanoscale particles has been considered to be graphene oxide powders (GOPs). The particles are assumed to have uniform and graded dispersions inside the matrix and the material properties have been defined according to Halpin-Tsai micromechanical model. The core layer is assumed to have honeycomb configuration. Annular plate has been formulated according to thin shell assumptions considering geometrical nonlinearities. After solving the governing equations via Galerkin's technique, it is showed that the post-buckling curves of annular sandwich plates rely on the core wall thickness, amount of GOP particles, sector radius, and thickness of layers.

• Applied Microscopy
• /
• v.40 no.1
• /
• pp.21-28
• /
• 2010

In a simulation study of atomic resolution transmission electron microscope images of single layer and bilayer graphene, it is demonstrated that the conventional Bloch wave formulations can be used when high-order Laue zone reflections are properly taken into account in the theory. The simulated images for bilayer graphene show 3-fold rotational lattice symmetry rather than the 6-fold one under certain conditions. This result can be understood as revealed the 3-fold rotational lattice symmetry of bilayer graphene in three dimensions along [0001]. For single layer graphene the observed phase images showing 3-fold rotational lattice symmetry were particularly noted. This phenomenon has been explained by an assumption of the re-configuration of electron density on the surface of graphene. And the matching images have been obtained as simulated with up to the second order Laue zone reflections only, reflecting the re-configuration of electrons on the surface.

• Journal of Advanced Navigation Technology
• /
• v.4 no.2
• /
• pp.171-181
• /
• 2000

In this paper, we propose an AVLS(Automatic Vehicle Location System) using the DSRC(Dedicated Short Range Communication) which adopts a radio communication tool between RSE(Road-Side Equipment) and OBE(On-Board Equipment) on a vehicle and uses the ISM bandwidth of 5.8GHz radio frequency. Typical AVLS uses the sensors for detecting the vehicle, but the DSRC system is developed for supporting various services such as the position of vehicle, clearance, vehicle to vehicle communication, collection and distributions of traffic and road information. Also, for fast processing, we design three-layer configuration of physical(L1), data link(L2), and application layer(L7), which simplifies the seven-layer configuration. We suggest the proposed system as a new technology for replacement of typical wireless communication system and sensors for AVLS.

• Journal of Internet Computing and Services
• /
• v.14 no.5
• /
• pp.27-38
• /
• 2013

Currently a number of managers exist to manage heterogeneous networks, in this situation, the NETCONF protocol for efficient network management has been proposed as a new protocol. However, the standard NETCONF protocol stack continuous improvement since the establishment but in four layers still have some problems. Especially in situations where there are multiple administrators, problems are more highlighted in operation layer. In this paper, we focus on these issues and the Operation layer has improved the efficiency and flexibility of operations among NETCONF four layers. Additionally, for the inefficiency of updates improved the device settings based on improved operation techniques. In addition, standard protocol NETCONF did not proposed content layer data structure and we propose standard technique of content layer that can generate configuration structure of devices. Improved the three techniques are applied appropriately to the NETCONF, the proposed method and the existing NETCONF was performed experiment to compare with experimental four factors. Compare key factor are four kind as maintaining the probability of network function, the reaction performance about command, the number of control packets, performance of data creation in content layer. Such factors after performing the experiment, the proposed method in this paper is superior to the existing NETCONF and there was confirmed by analysis Experimental results.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.267-270
• /
• 2011

In the process of inkjet-printed zinc tin oxide thin-film transistor, the effect of metallic interlayer underneath of source and drain electrode was investigated. The reason for the improved electrical properties with thin molybdenum oxide ($MoO_3$) layer was due to the chemically intermixed state of metallic interlayer, aluminum source and drain, and oxide semiconductor together. The atomic configuration of three Mo $3d_3$ and $3d_5$ doublets, three different Al 2p core levels, two Sn $3d_5$, and four different types of oxygen O 1s in the interfaces among those layers was confirmed by X-ray photospectroscopy.