• Journal of Ocean Engineering and Technology
• /
• v.15 no.2
• /
• pp.66-71
• /
• 2001

A sectional analysis of trunk-lid carried out by using the equilibrium approach based on the force balance together with geometric relations and plasticity theory. In computing a force balance equation, it is required to define a geometric curve approximating the shape of sheet metal at any step of deformation from the interaction between the die and the deformed sheet. The trunk-lid panel material is assumed to possess normal anisotropy and to obey Hill's new yield criterion. Deformation of each section of trunk-lid panel is simulated and composed to get the three-dimensional shape by using CAD technique. It was shown that the three-dimensional shape composition of the two-dimensional analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.9
• /
• pp.101-107
• /
• 1997

A sectional analysis of auto-body panel stamping is carried out by using the rigid-plastic FEM based on the membrane theory. The auto-body panel material is assumed to possess normal anisotropy and to obey Hill's new yield criterion and its associated flow rule. A method of contact treatment is proposed in which the skew boundary condition for arbitarily shaped tools is successively used during iteration. Deformation of each section of trunk-lid panel is simulated and composed to get the three-dimensional shape by using CAD technique. It was shown that the composition of the two-dimensional section analysis gives almost the same results as the full three-dimensional analysis.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.2
• /
• pp.61-70
• /
• 2011

This study aims to establish the concept about a new approaching method dor remodeling in the planning step. also, this study sets up the way how to approach in a dimensional way by classifying the conceptual composition of the target housing as a method. The dimensional definition is as below. The one dimensional approach: the spot. the two dimensional approach: the line, the three dimensional approach: the apatial mass, the four dimensional approach: space + time, the n dimensional (multi-dimensional) approach: the space + time + emotion. The research findings are as follows : For the purpose of remodeling, the old housing should be viewed in the three dimensional shape and space. It is defined as multi-dimensional module method to design the shape and space of the target housing in a multi-dimensional point, considering the three dimensional space composition, the emotion of the user, the housing itself. and the time of the user.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.5
• /
• pp.207-215
• /
• 2010

This study was carried out for the purpose of obtaining the basic data for identifying the origin of amethyst. For this, the three dimensional shapes of inclusions contained in various amethyst were observed with Stereo Zoom microscope. The shape and chemical composition of cross section of solid inclusion and the chemical composition of evaporite were investigated by SEM-EDS. The evaporite is made from evaporating of liquid inclusion which is flowed out of amethyst sample by decompressing. Lastly, The trace mineral composition of amethyst was investigated by ICP-AES after digesting the amethyst sample with HF-$H_2SO_4$ solution.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.199-202
• /
• 2002

The synthesis of materials with controlled composition and architectures continues to be a focus of considerable current research. Dendritic multiarm polymers such as dendrimer, hyperbranched polymer, and star polymers are three dimensional macromolecules, in which a large number of linear arms of similar molecular weight and narrow molecular weight distribution emanate from a central core. (omitted)

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.256-257
• /
• 2006

3D printing of NiTi alloys has been successfully achieved. A novel printing process has been developed and used, which consists in selective deposition of a solvent on a granule bed. The granules are composed of metal powders and thermoplastic binder, which are mixed and sieved by conventional methods. A sound green strength is obtained after solvent evaporation. Sintered parts exhibit good density, proper phase composition and shape memory behaviour.

• International Journal of Advanced Culture Technology
• /
• v.10 no.3
• /
• pp.295-306
• /
• 2022

The NOx removal performance of the SCR process depends on various factors such as catalytic factors (catalyst composition, shape, space velocity, etc.), temperature and flow rate distribution of the exhaust gas. Among them, the uniformity of the flow flowing into the catalyst bed plays the most important role. In this study, the flow characteristics in the SCR reactor in the design stage were simulated using a three-dimensional numerical analysis technique to confirm the uniformity of the airflow. Due to the limitation of the installation space, the shape of the inlet duct was compared with the two types of inlet duct shape because there were many curved sections of the inlet duct and the duct size margin was not large. The effect of inlet duct shape, guide vane or mixer installation, and venturi shape change on SCR reactor internal flow, airflow uniformity, and space utilization rate of ammonia concentration were studied. It was found that the uniformity of the airflow reaching the catalyst layer was greatly improved when an inlet duct with a shape that could suppress drift was applied and guide vanes were installed in the curved part of the inlet duct to properly distribute the process gas. In addition, the space utilization rate was greatly improved when the duct at the rear of the nozzle was applied as a venturi type rather than a mixer for uniform distribution of ammonia gas.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.2
• /
• pp.215-231
• /
• 2023

This study classifies short front long back skirts from the Joseon Dynasty by style type, identifies their formative characteristics based on their external morphological properties and internal composition, and examines their correlation with Korean thought. A literature review and empirical research were conducted for this study. The style of short front long back skirts is classified as inverted "b"-shaped, lower lip, wavy, trapezoid with a raised center hem, or half-circle. As such, this skirt possesses the formative properties of imbalance, variability of shape, intentional three-dimensionality, and confluence. In other words, with an imbalance resulting from the difference in length between the front and back, these skirts are characterized by variability in shape created by intentional three-dimensionality expressed as intentional three-dimensional beauty, the confluence of planes and dimensions, as well as of materials and colors. These properties are correlated with Korean ways of viewing the world. This study contributes to the development of Korean designs.

• Human Ecology Research
• /
• v.52 no.5
• /
• pp.509-518
• /
• 2014

This study strives to analyze the characteristics of and changes in breast shapes of women in their 30s, whose bodies start to age and whose breasts experience changes due to internal and external factors such as pregnancy, childbearing, and breast-feeding. The analysis of the indirect breast measurements for each age group (early, mid, and late 30s) demonstrates that the volume of the breasts increases proportionally with age, the breasts lose their firmness, and the nipples start to point downwards rather than to the sides. The breast shapes experience more significant changes vertically than horizontally as the breasts start to sag downwards. The composition factors of the breasts have been classified into five factors: the level of volume in the breasts and the surrounding area, the degree of sagging in the breasts, the position and vertical width of the breasts, the volume of the breasts, and the degree of width between the breasts. The breasts have been categorized into three different shapes. Breast Shape I (32.56%) appeared most frequently among women in their mid 30s, and this shape falls into the category of Sagging I, which is one of the six breast types that have been classified by the Japanese Wacoal Research Center, in addition to Korean size 80A. Breast Shape II (38.76%) appeared most frequently among women in their mid 30s, and this shape has been categorized as flat with its size being 70A. Breast Shape III (28.68%) appeared most frequently among women in their early 30s with a conical shape and size 75A.

• Korean Institute of Interior Design Journal
• /
• v.19 no.6
• /
• pp.47-58
• /
• 2010

Frank Lloyd Wright(1867-1959) was regarded as the pioneer of the modern architecture in the beginning and transition period of 20th century. His works have the pure shape form which have the deep relationship with the organic architecture. Wright told himself that the Froebel System had an influence on his works a lot. This study have researched about the three dimensional application of the Froebel System in his works with assembling and disassembling. Also the two dimensional application in the diagonal and circular plans are the one of the subjects here. The following conclusions are reached. First, The similar of the Wright's works and the Froebel System was the application of the similar principles rather than the copy of the method, which are the accent of the center, the composition of the part and whole, the understanding of the composition principle through the unit system and the unfolding of the crystal by rotation. Even thought the Wright's works have the triangle, square, hexagonal shape, the way of the expansion from the centered space was same. Also the space formed by the division of the center space, unfolds making the part and whole by overlap and continuation. The 2nd Froebel make space decided by the Net and Crystal Lattices which have the crystal characteristics by the rotation. The new geometric architecture, pinwheel, was created by this method. The application of the Froebel in the Wright's works have the several sets which are the 3th, 4th, 5th, 6th Froebels, 2nd, 7th Froebels and the 3th, 5th, 9th Froebels. The geometrical analysis of the square shape and the diagonal shape of the Wright's works was possible. The unfolding of the centered space can be found in the Guggenheim Museum using the analysis of the circular geometric of the 9th Froebel. The above study proves that the Froebel was not a mere tool for the basic shape training but also the main body of Wright's works which consists of the organic idea and philosophy of the space.