• 전기전자학회논문지
• /
• 제19권3호
• /
• pp.440-446
• /
• 2015

본 연구는 안테나에 커플링되는 협대역 고출력 전자기파에 대한 저 잡음 증폭기(LNA)의 민감성 특성을 알아보았다. LNA 소자의 오동작/파괴는 MFR/DFR((Malfunction Failure Rate/Destruction Failure Rate)을 이용하여 소자의 민감성을 확인하였다. 그리고 LNA 소자의 내부 칩 상태는 Decapsulation 분석을 이용하여 손상부위를 관찰하였다. 협대역 고출력 전자기파 장치는 2.45 GHz 마그네트론을 사용하였고, LNA의 민간성 레벨은 협대역 고출력 전자기파의 전계강도에 따라 오동작/파괴율을 평가하였다. 그 결과, LNA 소자의 오동작은 셀프리셋(Self Reset)과 파워리셋(Power Reset)의 형태로 나타내었고, 이때 오동작 임계 전계강도는 각각 524 V/m, 1150 V/m로 측정되었다. 그리고 LNA의 소자의 파괴 임계 전계강도는 1530 V/m이다. 협대역 고출력 전자기파에 의한 LNA 소자의 내부 칩 파괴는 본드와이어, 온칩와이어 그리고 컴포넌트 세가지 형태로 관찰되었다. 이 결과로, 협대역 고출력 전자기파에 의한 반도체 전자회로의 내성평가 자료로 활용할 수 있을 것으로 판단된다.

• 한국염색가공학회지
• /
• 제15권1호
• /
• pp.48-55
• /
• 2003

As the polyester fiber becomes thinner, thermomigration that is the most important factor deteriorating the washfastness, is more dominant. For improving the washfastness of ultrafine polyester dyed with disperse dye, it is necessary either to decrease the amount of thermomigrated dyes on the fiber surface, or to use a disperse dye containing diester group in the coupling component. This paper is concerned to investigate the relation between the chemical structure of three disperse dyes and their dyeing properties and washfastness. The disperse dye whose molecular size is big, can dye ultrafine polyester with good build-up, and its washfastness is reasonably good. Other disperse dye which has diester group, shows the same dyeing properties as the standard disperse dye, and its washfastness is better than that of the standard disperse dye.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1627-1633
• /
• 2017

This paper proposes a voice enhancing ear-protection system which is based on feedback active noise control(FBANC). The proposed system selectively suppresses the background noise and preserves the talking voice by controlling the adaptive algorithm with the voice activity period detection module. The noise reduction performance of the proposed noise canceling algorithm is analytically derived for the two key performance affecting parameters, i.e., electro-acoustic coupling distance and noise bandwidth. The proposed system is also implemented with a floating-point DSP system and its performance is experimentally tested to compare with the analytically derived results. The achieved levels of noise reduction for the three different noise bandwidths cases, i.e., 10Hz, 50Hz, and 90Hz, are high to show 17.05dB, 10.54dB and 8.99dB, respectively. The feasibility of the proposed system is also shown by the peak noise reduction achieved more than 25dB while preserving the voice component in the frequency range between 200-800Hz.

• Wind and Structures
• /
• 제19권6호
• /
• pp.665-686
• /
• 2014

This study presents a comprehensive investigation of the aerostatic and buffeting response characteristics of a suspension bridge catwalk. The three-dimensional aerostatic response analysis was carried out taking into account the geometric nonlinearity and nonlinear dependence of wind loads on the angle of attack. The buffeting response analysis was performed in the time domain. The aerostatic and buffeting responses of the catwalk show strong coupling of vertical and lateral vibrations. The lateral displacement is the main component of the wind-induced static and buffeting response of the catwalk.

• Bulletin of the Korean Chemical Society
• /
• 제30권5호
• /
• pp.1054-1056
• /
• 2009

We have demonstrated a one-pot three component coupling of an aldehydes, an amines, and triethyl phosphite using 1-benzyl-3-methyl imidazolium hydrogen sulphate [bnmim][][$HSO_{4}$] as an efficient catalyst. All the reactions proceed under solvent-free conditions at room temperature. This methodology afforded the corresponding $\alpha$-aminophosphonates in shorter reaction times with excellent yields.

• 대한화학회지
• /
• 제62권3호
• /
• pp.187-190
• /
• 2018

A three-component coupling reaction of phenylacetylene, p-toluenesulfonyl azide, and water through copper catalysis is described to provide knowledge of spectroscopy and catalytic reactions and to introduce current research topics in organic chemistry for second-year undergraduate students. In the presence of stoichiometric amounts of phenylacetylene, p-toluenesulfonyl azide, and triethylamine, the reaction was performed with 4 mol% CuCl in water as the sole solvent and was completed in 1.5 h. A practical purification method and recrystallization of the crude reaction mixture resulted in the rapid isolation of the desired product with yields of 42~65%. Students characterized 4-methyl-N-(phenylacetyl)benzenesulfonamide by using melting-point determination, infrared spectroscopy, and nuclear magnetic resonance (NMR) spectroscopy. This experimental procedure and spectroscopic data analysis will serve as a platform for students to apply classroom knowledge in practical state-of-the-art research.

• Bulletin of the Korean Chemical Society
• /
• 제28권11호
• /
• pp.1902-1909
• /
• 2007

This account reports an overview of our findings in homogeneous Pd-catalyzed reactions. Herein we describe the new design in reactions of Group 14 element compounds and in homogeneous nanosize Pd catalysts. In the early stages of our study, we developed Pd-catalyzed transformations of allylic esters with disilanes, silylcyanides and acylsilanes to the corresponding silylation, cyanation and acylation products, respectively. We also developed a Pd-catalyzed three component coupling reaction of Group 14 element compounds involving 1,3-diene and acid chlorides to form β,γ-unsaturated ketone as a single product. Recently, we focus our attention on modifying the catalytic environment by nanosize Pd in order to improve the performance of Pd catalysts. These nanosystems realize efficient catalytic environment with remarkable enhancement in catalytic activity and unprecedented selectivity.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.453-458
• /
• 2008

Under driving condition, A vehicle experiences various kinds of loads, which brings on the buckling and fracture of suspension systems. Lower control arm (LCA), which consists of 2 bush joints and 1 ball joint connection, is the one of the most important parts in the suspension system. The bush joints absorb the impact load and reduce the vibration from the road. When analyzing the LCA behavior, it is important to understand the material properties and boundary conditions of bushing systems correctly, because of the nonlinearity characteristics of the rubber. In this paper, in order to predict the large scale deformation of the LCA more precisely, three factors are newly suggested, that is, coupling of bush stiffness between translation and rotation, bush extraction force and maximum rotation angle of ball joint. LCA stiffness is estimated by CAE and component test. Analysis and test results are almost same and the validity of considering three factors in LCA analysis is verified.

• 전력전자학회논문지
• /
• 제20권1호
• /
• pp.1-10
• /
• 2015

This paper proposes a control algorithm for permanent magnet synchronous generators with a back-to-back three-level neutral-point clamped voltage source converter in a medium-voltage off-shore wind power system under unbalanced grid conditions. Specifically, the proposed control algorithm compensates for unbalanced grid voltage at the PCC (Point of Common Coupling) in a collector bus of an off-shore wind power system. This control algorithm has been formulated based on symmetrical components in positive and negative synchronous rotating reference frames under generalized unbalanced operating conditions. Instantaneous active and reactive power is described in terms of symmetrical components of measured grid input voltages and currents. Negative sequential component of AC input current is injected into the PCC in the proposed control strategy. The amplitude of negative sequential component is calculated to minimize the negative sequential component of grid voltage under the limitation of current capability in a voltage source converter. The proposed control algorithm enables the provision of balanced voltage at the PCC resulting in the high quality generated power from off-shore wind power systems under unbalanced network conditions.

• 한국전자파학회논문지
• /
• 제19권6호
• /
• pp.597-602
• /
• 2008

본 논문은 고출력 전자파에 따른 CMOS IC 소자의 피해 효과와 회복 시간을 알아보았다. 고출력 전자파 발생 장치는 마그네트론을 사용하였고, CMOS 인버터의 오동작/부동작 판별법은 유관 식별이 가능한 LED 회로로 구성하였다. 그리고 고출력 전자파에 의해 오동작된 CMOS 인버터의 전원 전류와 회복 시간을 관찰하였다. 그 결과, 전계 강도가 약 9.9 kV/m에서의 전원 전류는 정상 전류의 2.14배가 증가하였다. 이는 래치업에 의한 CMOS 인버터가 오작동된 것을 확인할 수 있었다. 또한, COMS 인버터의 파괴는 컴포넌트, 온칩와이어, 그리고 본딩 와이어에서 다른 형태로 관찰하였다 위 실험 결과로, 전자 장비의 고출력 전자파 장해에 대한 이해를 돕는데 기초 자료로 활용될 것으로 예측된다.