• Journal of the Korea Furniture Society
• /
• v.21 no.3
• /
• pp.237-247
• /
• 2010

This research was carried out to examine the properties of black charcoal board, in order to find the proper manufacturing condition for the black charcoal-board made of the charcoal. The charcoal in this study was distillated from domestic wood waste, and it were also the purpose of this study to see if the black charcoal-board has the advantageous properties of charcoal as a well-being building material against the sick house problem. Domestic wood waste was consisted of MDF 40%, PB 30%, plywood 15% and wood 15%, respectively. Black charcoal board was produced by hot pressing with following conditions; temperature $170^{\circ}C$, three stage pressing cycle of $40-10-40\;kgf/cm^2$(1min.-2.5min.-5min.) and non formaldehyde adhesives [P15%+M5%:MDI(M), poly vinyl acetate emulsion(P). Fine mixed particle size [#6-12(16.9%), #12-18(16.7%), #12-40(47.2%), #40-60(9.5%), #60-100(5.9%), less than #100(3.8%)] gave better results than larger particle size [over #6(33.8%), #12-18(17.7%), #12-40(37.7%), #40-60(6.4%), #60-100(2.6%), less than #100(1.8%)]. Final moisture content of the mat was best at 36%. Black charcoal-board showed less MOR and IB(internal bond), more WA(water absorption) than that of white charcoal-board. Black charcoal board showed not only the same gas adsorption and dimensional stability as white charcoal board but also good cutting, nailing and drilling for indoor environment systems.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.2
• /
• pp.11-21
• /
• 2005

A three-dimensional parallel Euler flow solver has been developed for the simulation of unsteady rotor-fuselage interaction aerodynamics on unstructured meshes. In order to handle the relative motion between the rotor and the fuselage, the flow field was divided into two zones, a moving zone rotating with the blades and a stationary zone containing the fuselage. A sliding mesh algorithm was developed for the convection of the flow variables across the cutting boundary between the two zones. A quasi-unsteady mesh adaptation technique was adopted to enhance the spatial accuracy of the solution and to better resolve the wake. A low Mach number pre-conditioning method was implemented to relieve the numerical difficulty associated with the low-speed forward flight. Validations were made by simulating the flows around the Georgia Tech configuration and the ROBIN fuselage. It was shown that the present method is efficient and robust for the prediction of complicated unsteady rotor-fuselage aerodynamic interaction phenomena.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.1-20
• /
• 1999

In Japan, geophysical exploration methods have been widely applied to civil engineering and construction fields for a long time. In particular, seismic refraction has long played a significant role in geotechnical site investigations for tunnels, dams and landslides. However, our growing interest on the social and natural environment makes the methods available and its application fields diversify. Digital technologies such as personal computer have revolutionized our ability to acquire large volumes of data rapidly, and to produce more reliable results for subsurface image. Also, color graphics easily visualizes survey results In a more understandable manner, These days geophysical methods are essential to assessing grouting effects, predicting the front of tunnel cutting face, monitoring the movement, pollution and purification process of groundwater. Now three-dimensional exploration techniques have developed for the site characterization in civil engineering and construction needs.

• The Journal of the Korea Contents Association
• /
• v.21 no.3
• /
• pp.1-9
• /
• 2021

The hologram pyramid is an application of floating holograms, allowing the observer to see three-dimensional holograms from various angles without wearing wearable devices. Due to the low cost and ease of manufacturing, it has been used in a wide variety of fields as diverse as education, prototyping, showcase, and etc. But, when the observer looks at the hologram from the place where each side of the hologram pyramid is connected, the hologram looks cut and distorted. Also, the observer can see the only hologram of angles viewed head-on from each side. In this paper, we propose a method of generating a hologram image corresponding to the observer's gaze angle by tracking the observer's position and conducting reverse distortion. It provide a hologram of the angle viewed by the observer without cutting and distortion. In addition, the existing method and the proposed method were applied and compared in the hologram pyramid.

• Geomechanics and Engineering
• /
• v.28 no.3
• /
• pp.265-281
• /
• 2022

A set of slurry shield test system capable of cutter cutting and slurry automatic circulation is used to investigate the deformation characteristics, the evolution characteristics of support resistance and the distribution and evolution process of earth pressure during excavating and collapsing of slurry shield tunneling in circular-gravel layer. The influence of cover-span ratio on surface subsidence, support resistance and failure mode of excavation face is also discussed. Three-dimensional numerical calculations are performed to verify the reliability of the test results. The results show that, with the decrease of the supporting force of the excavation face, the surface subsidence goes through four stages: insensitivity, slow growth, rapid growth and stability. The influence of shield excavation on the axial earth pressure of the front soil is greater than that of the vertical earth pressure. When the support resistance of the excavation face decreases to the critical value, the soil in front of the excavation face collapses. The shape of the collapse is similar to that of a bucket. The ultimate support resistance increase with the increase of the cover-span ratio, however, the angle between the bottom of the collapsed body and the direction of the tunnel excavation axis when the excavation face is damaged increase first and then becomes stable. The surface settlement value and the range of settlement trough decrease with the increase of cover-span ratio. The numerical results are basically consistent with the model test results.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.119-126
• /
• 2023

Today, in order to improve fuel efficiency and dynamic behavior of automobiles, an era of light weight and simplification of automobile parts is being formed. In order to simplify and design and manufacture the shape of the product, various components are integrated. For example, in order to commercialize three products into one product, product processing is occurring to a very narrow area. In the case of existing parts, precision die casting or casting production is used for processing convenience, and the multi-piece method requires a lot of processes and reduces the precision and strength of the parts. It is very advantageous to manufacture integrally to simplify the processing air and secure the strength of the parts, but if a deep and narrow pocket part needs to be processed, it cannot be processed with the equipment's own spindle. To solve a problem, research on cutting processing is being actively conducted, and multi-axis composite processing technology not only solves this problem. It has many advantages, such as being able to cut into composite shapes that have been difficult to flexibly cut through various processes with one machine tool so far. However, the reality is that expensive equipment increases manufacturing costs and lacks engineers who can operate the machine. In the five-axis cutting processing machine, when producing products with deep and narrow sections, the cycle time increases in product production due to the indirectness of tools, and many problems occur in processing. Therefore, dedicated machine tools and multi-axis composite machines should be used. Alternatively, an angle spindle may be used as a special tool capable of multi-axis composite machining of five or more axes in a three-axis machining center. Various and continuous studies are needed in areas such as processing vibration absorption, low heat generation and operational stability, excellent dimensional stability, and strength securing by using the angle spindle.

• Journal of the Korean Society of Costume
• /
• v.30
• /
• pp.261-274
• /
• 1996

In the present age dominate by both cer-taingty of 1% and uncertainty of 99% 'Fuzzy thinking' of Bart Kosko that is the way to solve the problems by the scientific way through a worldview of Buddhism or Taoism greatly prevails around the world over 'Lateral greatly prevails around the world over 'Lateral thinking' and the authenticity or the right and-wrong of the uncertainty which is the thinking way to find the answer of the problems of illogical way of Edward de Beno against the western vertical thinking were Concurrently fashion designers over the world also adopt the oriental elements. But there exist differences of thoughts between the orient and the occident. And they have dif-ferent thinking way of aestheticism and references of the value on the beauty. Not only beauty but the view through the mind as intuitional thought in which not only the rec-ognition of sense but also the rationalism and the naturalness play key role. The aesthetic sense in the orient contains both the truth and virtue. 2) The beauty of the mean It's from the thought of neutralization of Confucius. The mean or moderation state which in harmony with ethical virtue and aes-thetic beauty is the ideal and is the ultimate. Therefore the thought of Confucian is the creativity in which the balance and the har-mony is most important. Fashion design is also one of the representation of the mean because the spirit of the designer is harmonized for-mlessly with the object of the model of the fashion design. 2) The beauty of skillfulness It indicates the Taoism of Lao-tzu and Chuangtzu. It takes a super-artistic declar-ation that human can feel and recognize the color of colorlessness the sound of sound-lessness and the taste of tastelessness. The thought of arts affected by Taoism is 'ad-vanced age' called the beauty of skillfulness. The view of arts of lao-tzu takes the beauty of cosmos and the nature as a standard. Es-pecially the beauty of inactivity is recognized by the linkage between the beauty and the ugliness. And these things appear in fashion design as a design element such as humor or exaggeration. 3) The beauty of non-dualism It is thought of Buddhism that all evil passions of worry occur form the opposition in dualism. Finally this thought leads to that everything is consistent and truth is only one from the point of view that virtue and vice has on linkage that is 'no virtues no vices' and 'one with two, two, with one, one is not two' A big tendency like this became the root forma-tion of the thought of the oriental arts. 3. Characteristics of the oriental aesthetic sense on the present fashion design 1) The formation of the fashion design on the oriental elements In the picture-incantation which was a representation of an era when the thought of 'cosmic dual forces' dominated the basic polygons of 'a circle square triangle' means both 'one two three' and 'the negative positive mean' of cosmic elements. From this point of view the was of planner cutting in the Orient is dif-ferent from that of the Occidental which is in three-dimensional. The planner polygon type of the cut-pieces comes to have the meaning of the three-dimension when they consist of a suit that has the combination of each cut-piece. This shows the consistency with the principle of cosmos creation of Taoism that one is two two is three and three is every-thing. 2) The coloring and the symbolic represen-tation of the fashion design on the orien-tal elements The sense on the colors in the Orient from the thought of 'the cosmic dual forces and the five elements' is not the experi-enced from the knowledge but contains the consideration of philosophy Five-primary-color representing compass directions Blue(East) Red(South) Yellow(Center) White (West) and Black (North) is called ' the posi-tive' for this five-primary-color secondary-color which comes from the compound of the primary colors is called 'the negative' The thought of 'the cosmic dual forces and the five elements' is also an theory containing the natural order of the cos-mos and this shows the perceptional differ-ence that they are not conceptual but to be recognized and fell directly. A thought of Buddhism which is 'Colors are colorlessness and Clolorlessness are color's proves that. 3) The pattern and symbolic representation of the fashion design on the oriental elements The pattern as a visual style is a figure of symbolic representation which adopt the mental and physical world of human and are the compo-sition of artistic revelation of the human nature and the religous thought of incantation. Es-pecially the symbolic representation of the oriental thought of Confusion. Buddhism and Taoism There are patterns such as plants aminals the oriental four gods and geometry. From the above it's the time toward the 21'th century when the world is constructing one global area and one historical zone. And the exotic mood of the Orient represented in the fashion which doesn't make the common feeling in general does not cease to develop only to express the visual modeling but also adopts the thought religion and the art which are the root of the Orientail and contains inherent willing of modeling.

• Journal of Plant Biology
• /
• v.13 no.1
• /
• pp.33-46
• /
• 1970

Pinus densiflora stands are common secondary forest communities on infertile soils in Korea. The stands are results of long severe past biotic pressure such as cutting, burning and grazing. These could be regarded as biotic climax in Korea. Because of their prevalent occurrence, relatively simple species and age composition, and their domestic economic importance, study of their distributional patterns may give some basic knowledge for better utilization of land resources in Korea. To detect distributional patterns and interspecific associations ten pine stands, each of which was homogenious with respect to topography and physiognomy, were subjectively selected from pine stands in Kyunggi Province near Seoul in 1969 and were made object of this study. Four contiguous systematic samples of count for trees, shrubs and seedlings from belt transects were collected from homogeneous areas within ten natural pine stands. The belt transect was 64m or 128m in length, and 1m, 2m or 4m in width. Basic units within the transect ranged from 64 to 256. The data from the contiguous transects were analysed in terms of multiple split-plot experiment. Departure from randomness of stem distribution, i.e., pattern, was tested in terms of variance mean ratio. For the detection of association between species, correlation coefficient was calculated for different block sizes. The values of ${\gamma}$ were tested by the usual t-test. Fine trees within one of the stands showed significant regular distribution through out the blocks. Within other eight stands pines were randomly distributed at basic unit with 4$\times$4m, 2$\times$2m, 2$\times$1m and 1$\times$1m. One significantly clumped distribution at basic unit 2$\times$2m, however, was observed from one of the pine stands. These randomly distributed groups were themselves significantly regularly distributed throughout the blocks for four pine stands. For the other four pine stands, in addition to the random distribution at the basie unit(the primary random group), randomly distributed groups with 32m dimension(the secondary random groups) were also observed. Both the primary and the secondary random groups were significantly regularly distributed at the rest of blocks. Pine seedlings were not distributed randomly thoughout the blocks. Within three of the ten stands they were contagiously distributed. Important shrub species underneath pines such as Querus serrata, Q. acutissima, Leapedeza intermedia, Rhododendron Yedoense var. poukhanenae, Juniperus utilis, Rhododendron mucronulatum var. ciliatum shnwed consistently similar distributional pattern with the pine at each stand. The shrub species pairs; Rhododendron Yedoense var. poukhanenae/Quercus serrata, Rhododendron mucronulatum var. ciliatum/Lespedeza intermedia were significantly negatively associated from 1m to 4m dimensional block sizes but became significantly positively associated from 8m sized blocks on. On the other hand the shrub species pairs; Lespedeza intermedia/Robinia Pseudoacacia, and Lespedeza bicolor var, japonica/Lespedeza intermedia were also significnalty negatively associated from 1m to 8m sized blocks but became significantly positively associated from 16m sized blocks on. The associational pattern between Rhododendron mucronul tun var. poukhanenae and Lespedeza intermedia was not consistent throughout the stands. In some stands negative associations were observed throughout the blocks except NS 32. From these observatons micro-edaphic variation within the pine stands seems not to be great enough to cause distributinal difference of pine trees within the ten pine stands. Among each species and pine seedings, however, the edaphic variation within the pine stands may be great enought to cause distributional variation.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.345-349
• /
• 2019

In Korea, the mountainous area occupies more than 70% of the whole country, cutting of earth slope that cuts a part of the ground surface is widely used when building infrastructures such as road, railroad, and industrial complex construction. In recent years, regulations on environmental damage have become more strict, and various methods have been developed and applied. Among them, Concrete-Panel Retaining Wall technique is actively applied. Concrete-Panel Retaining Wall is a method to resist horizontal earth pressure by forming a wall by attaching a precast retaining wall to the front of the support material and increasing the shear strength of the disk through reinforcement of the support material. Soil nailing, earth bolt, and ground anchor are used as support material. Among them, ground anchor is a more aggressive reinforcement type that introduces tensile load in advance to the steel wire, and a large concentrated load acts on the front panel. This concentrated load is a factor that creates cracks in the concrete panel and reduces the durability of the retaining wall itself. In this study, steel pipe sleeves and reinforcements were purchased at the anchorage of the panel to prevent cracks, and by applying bumpy shear keys to the end of the panel, the weakness of the individual behavior of the existing grout anchors was improved. The problem of degraded landscape by exposure to front concrete of retaining wall and protrusion of anchorage was solved by the production of natural stone patterns and the construction of sections that do not protrude the anchorage. In order to verify the effectiveness of anti-crack sleeves and reinforcements used in the null, indoor testing and three-dimensional numerical analysis have been performed, and the use of steel pipe sleeves and reinforcements has demonstrated the overall strength increase and crack suppression effect of panels.

• Journal of Digital Convergence
• /
• v.19 no.4
• /
• pp.251-257
• /
• 2021

With the development of new media, great changes are taking place in the way people get information. The change is the use of video content that can deliver content in a more three-dimensional way than words or photos. After 2016, the number of live video streaming content providers and users has increased. In this paper the write takes the 1 personal live video streaming content as the research object. And the write takes live video streaming content on YouTube live or Douyu TV as a research example. In this paper, the writer analyzes the digital information content in the live video streaming case. And the writer expounds the necessity of these visual information and the characteristics of real-time live video streaming content. Especially since 2020, because of the influence of the COVID-19, the live video streaming industry has begun to combine with the traditional industry. It is expected that the integration of digital cutting-edge technology and live video streaming will not only provide diversity in the content, but also create more social value for the video content consumption culture. Therefore, The writer thinks it is necessary to conduct in-depth research on the social responsibility of real-time live content in the future.