• 한국자기학회지
• /
• 제18권3호
• /
• pp.103-108
• /
• 2008

비휘발성 메모리 분야에서 MRAM이 큰 주목을 받지 못하는 이유는 일반적인 비휘발성 메모리에 비해 기록용량이 작다는 문제를 안고 있기 때문이다. 이러한 문제는 MRAM의 일반적인 구조가 자기 효율이 떨어지는 구조를 가지고 있기 때문이다. MRAM이 고용량화 되기 위해선 한 셀의 구조가 작아져야 하는데 두 전류라인만을 이용하는 일반적인 구조에선 큰 기록 필드를 발생시킬 수 없기에 셀의 구조를 작게하는 것은 불가능하다. 본 논문에서는 MRAM의 기록층 양단에 큰 투자율을 가진 Pole을 추가한 형태의 새로운 MRAM을 제안하고 있다. 새로이 고안된 MRAM은 일반적인 MRAM에 비해 자기효율이 크게 향상 되기 때문에 큰 기록 필드를 발생시킬 수 있기 때문에 보자력이 큰 기록 층을 사용할 수 있고 이로 인해 한 셀의 사이즈를 줄일 수 있게 된다. 본 연구는 3차원 유한요소법을 사용하여 진행 되었다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제29권1호
• /
• pp.14-25
• /
• 2003

The purpose of this study was to analyze the stress pattern in different bone densities surrounding fin-type implant fixtures under the vertical and inclined loads ($30^{\circ}) of 200N. Von-Mises stress, the pricipal stress, and the displacement on the implant fixtures under the loads were calculated by using the finite element method. Four different types of bicon implant fixture were used for this study. The geometries of implant fixtures to develop the model were used by a sales brochure and profile project. Three-dimensional finite element model of the mandible was developed with 6.0 mm implant in diameter wurrounded by approximately 2.5 mm of bone. Bone densities were classified according to the elastic modulus of the tree. The finite element program MSC PATRAN (MSC, Software Corp., USA) were used for analysis of stress distribution. The value of the Von-Mises stress, the pricipal stress, and the displacement on the implant fixtures under the vertical and inclined loads were decreased when the diameter of implant fixture was increased, and increased when the elastic modulus was decreased. The stress on implant fixture under the vertical and inclined loads was distributed through the length of implant fixtures in D3 and D4. The distribution of stress was influenced by the direction of loads. In the wide diameter of implants, the stress was developed at outer surface of bone. In conclusion, this study suggest that stress developing on the peri-implant tissues might be influenced by the dimension of implant, elastic modulus of bone, and direction of loads.

• 디지털융복합연구
• /
• 제15권2호
• /
• pp.355-360
• /
• 2017

디자인의 기본 요소인 선을 활용하여 금속조형물을 시각적으로 완성하기 위해 시작된 본 연구는 선의 다양한 특징과 개념을 살펴보고 선행된 연구 중에서, 선을 중심으로 진행된 작품연구들을 통해 선의 조형적 아름다움을 알아보았다. 그 결과 선의 조형적 해석은 크게 선의 굵기와 선의 장단에 의한 의도적 표현으로 진행됨을 알 수 있었다. 선행 연구들을 바탕으로 연구자는 기존의 선의 조형적 표현에서 벗어나 시각적으로 자유로우면서도 미적 아름다움을 함께 느낄 수 있는 금속조형물을 얻기 위해 적동판과 인청동선 용접을 활용하여 선의 변형과 반복으로 하나의 패턴을 완성하고 이를 통해 작품으로 연계하였다. 그 결과 선의 면적인 표현은 물론 전체적 형태의 입체감과 속도감, 통일감을 함께 느낄 수 있었다. 앞으로도 선의 조형적 해석은 더 많이 연구되어야 할 것이며, 더 나아가 선의 표현을 통한 감성적, 내재적 아름다움에 대한 다양한 연구가 계속 되어야 할 것이다.

• Child Health Nursing Research
• /
• 제6권3호
• /
• pp.362-371
• /
• 2000

The purpose of this study was to examine the stressors, coping styles, communication with mother, school adaptation and predictors for school adaptation. The subjects of this study consisted of 354 children. They were 6th grade of elementary school in Taegu city. The periods of study was from march 10, to march 18, 2000. Data were analyzed by SAS computer programme. The results of this study were as follows: 1. The mean score for stressor was 39.91 in children(range 24-72). The higher stressor among three subgroups of stressor was mass media stressor. The degree of stressor revealed to be influenced significantly economic status. 2. The most frequently used coping style was problem-oriented coping style(M=18.94) in children. The degree of emotion-oriented coping style revealed to be influenced significantly family's atmosphere 3. The mean score for communication with mother was 72,44 in children(range 20- 100). The degree of communication with mother revealed to be influenced significantly sex, economic status, family' atmosphere. 4. The mean score for school adaptation was 62.48 in children(range 25-100). The higher school adaptation among five subgroup was rule dimension. The degree of school adaptation revealed to be influenced significantly sex, birth, mother's job, economic status, family's atmosphere. 5. School adaptation were positively correlated with communication with mother, problem- oriented coping style(r=0.40 p<0.001) (r=0.30 p<0.001). 6. School adaptation were negatively correlated with emotion-oriented coping style, stressor (r=-0.16 p<0.01)(r=-0.13 p<0.01). 7. Forward multiple regression analysis revealed that the most powerful predictor was the variable communication with mother accounted for 15.25% in school adaptation. All variables accounted for 25.55% in school adaptation. From the above results, it can be concluded that teaching mother about importance of communication, encouraging to use problem-oriented coping style is necessary to improve school adaptation in 6th grade elementary school children

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.404-408
• /
• 2009

The liquid desiccant air-conditioning system has been proposed as an alternative to the conventional vapor compression cooling systems to control air humidity. The complete system of liquid desiccant air-conditioning system is consisted two main components those are humidifier (regeneration) and dehumidifier. Humidifier part is connected to the load when summer season which is the air condition is hot and humid have to be turned into comfort condition on human. This paper purpose is performances study of air flow rate effect on a structured packed tower on cooling and dehumidifier system using liquid lithium chloride as the desiccant. Experimental apparatus used in this present study is consisted of three components those are load chamber, packed tower and chiller. Load chamber’s volume is $40m^3$, and packed tower dimension is cubic with length 0.4m occupied with packed column. Totally, 15 experimental has done using 5 times repeat on each variable of air velocity that varying on 2m/s, 3m/s and 4m/s with other conditions are controlled. Air inlet initial temperature and relative humidity are set respectively on $30^{\circ}C$ and 52%, desiccant flow rate is 0.63 kg/s, desiccant temperature is $10^{\circ}C$ and desiccant concentration is 0.4. The result of this study shows that averagely, the moisture removal rate and the heat transfer rate are influenced by the air velocity. Higher air velocity will increase the heat transfer and decreasing the moisture removal rate. At adiabatic condition the air velocity of 2 m/s respectively is having the higher moisture removal rate acceleration then the air velocity of 3m/s and 4 m/s until the steady state condition.

• 한국주거학회논문집
• /
• 제24권3호
• /
• pp.37-44
• /
• 2013

As household energy consumption has increased, serious environmental problems, such as resource depletion and global warming, are becoming global issues. It is essential to conduct the energy use of residents living in apartments in order to come up with alternative solutions for energy savings. Therefore, this study examined the energy use awareness of apartment residents and their energy use behavior by various types of awareness. To understand their energy use behavior according to the awareness of the subjects, the energy awareness dimension was created with five factors and they were subject to a cluster analysis; then, the subjects were categorized into three groups. Finally, the difference of energy use behavior was examined by groups of energy awareness. G1 represents the group that is indifferent to energy savings and believes that convenience is an important factor. Also, with respect to energy use behavior, this group tends to pursue convenience. G2 is the group that is conscious of energy use costs thereby enduring some inconvenience, and shows savings behavior in daily life and household affairs. Although, G3 is very aware of the significance for the necessity of energy saving, their energy saving behavior is relatively negative. Regarding these different characteristics of each resident group in their energy saving awareness and behaviors, diverse methods and promotion in energy education are required. Furthermore, an effective energy policy should be established based on the understanding of energy consumption.

• 한국병원경영학회지
• /
• 제17권1호
• /
• pp.23-42
• /
• 2012

The purpose of this study is to identify the inpatient service quality at mental hospitals and to examine the effect of service quality on patient's overall satisfaction and customer loyalty. Data collection was done through conducting a survey of inpatients in three mental hospitals located in Chungnam, Korea using self administered questionnaire. The questionnaire included the modified version of 'service satisfaction scale for psychiatric patients' invented by Chul Kwon Kim and other members, which consists of five dimension of service quality: staff attitude, treatment quality, ward environment, access/cost and ward rule. Total 236 questionnaires were gathered and 219 were used for analysis. The data was analyzed by using version SAS9.2 and path analysis model was applied to test our hypothesis. As a result, the four factors of service (staff attitude, treatment quality, ward environment and ward rule) were extracted, which counted for 62.89% of the common variance. Moreover, Cronbach Alpha showed relatively high internal consistency of answer, all exceeding 0.6. According to the study, ward environment and treatment quality turned out to have direct influence on the patient's satisfaction. In addition, staff attitude and overall satisfaction directly influenced the customer loyalty while ward environment and ward rule indirectly had influence using overall satisfaction as a medium. In conclusion, in order to enhance the satisfaction and customer loyalty in mental hospitals, efforts in improving environmental service quality in particular is highly demanded.

• 한국가스학회지
• /
• 제12권3호
• /
• pp.68-74
• /
• 2008

폭발챔버에서 전파하는 화염과 장애물 위치 및 형태에 따른 상관관계를 조사하기 위해 폭발실험을 수행하였다. 챔버내에 장애물 설치 위치는 점화원으로부터 상부로 200 mm, 500 mm, 800 mm 높이로 변화를 주어 설치하였고, 장애물 형태는 삼각기둥, 사각기둥 및 원통형으로 변화시켰다. 전파하는 화염과 장애물 위치 및 형태에 따른 상관관계를 조사하기 위해 고속카메라를 사용하였다. 고속카메라로 얻어진 화염 이미지로부터 장애물 주위의 국부 화염속도 및 그 화염속도의 확률밀도함수가 계산되었다. 실험결과, 장애물이 800 mm에 위치하였을 때 화염속도 및 폭발압력이 가장 높게, 200 mm에서는 가장 낮게 나타났다. 이러한 결과는 폭발거동 특성이 장애물 위치에 큰 의존성을 가지는 것으로 해석될 수 있다. 또한, 장애물 형태가 삼각형이었을 때 화염속도 및 폭발압력이 가장 높게, 원형에서는 가장 낮게 나타났다.

• 한국의류학회지
• /
• 제25권8호
• /
• pp.1524-1535
• /
• 2001

The purpose of this study was to establish a sizing system according to size and dimension whereby manufactured pants can be classified and develop men’s formal pants pattern based on the analysis of ready-made and educational pants pattern. The first, we surveyed the sizing and the basic pants patterns of the men’s ready-made wear companies, Secondly, through the survey data of the domestic men’ready-mad clothing industry, we proposed a new sizing system. Lastly, after compared three different types of ready-mad pants manufactured according to their patterns and an additional type of pants made after the educational pattern, the new men’s basic pants pattern were developed. The findings were as follows: 1. Survey of the domestic ready-mad garment industry showed that each company classified its own manufactured goods according to its own sizing system: moreover, they each used its own unique patterns which appeared to be resulted from a combination of two factors : the experience of a patterner and foreign know-how technology. 2. New sizing system was developed with 12 steps from size 74-88 to size 96-106 based on the high frequencies of the companies’3. New basic patterns for men’s formal pants were developed: Inseam length = 80cm, crotch line = H/4+4.6cm, pants ham = 23.5cm as basic lines and front waist girth =W/4+9.1cm as drafting line. 4. the superiority of the new basic patterns were been demonstrated by a high approval rate of the subjects who participated in testing.

• 디자인학연구
• /
• 제17권1호
• /
• pp.289-298
• /
• 2004

패션텍스타일 산업의 미래를 제시할 수 있는 패션텍스타일 전용 CAD 시스템의 개발은 디지털 기술의 발달과 함께 가속화되고 있다. 이러한 디지털 문화 기반의 구축은 패션텍스타일 산업에서도 고부가가치의 상품개발과 신속한 생산체제의 변화가 요구되며, 이런 욕구에 충족할 수 있는 전용 프로그램들이 개발되고 있다. 본 연구에서는 디지털 패션텍스타일의 변화와 디자인 시스템의 구성과 특징을 고찰하고 디지털 패션텍스타일 디자인 전개방법을 비교분석하였다. 또한 기존 그래픽프로그램과 차별화되어 개발되고 있는 창의적인 디지털 패턴디자인의 전개와 변형, 적합한 직물 텍스츄어의 표현, 3D모델링을 통한 시뮬레이션효과를 체계적으로 정립하였다. 패션텍스타일 CAD시스템의 활용을 디자인적 측면과 생산적인 측면으로 나누어 패션텍스타일 디자인 전용 CAD의 활용 가치를 높이는데 중점을 두었다.