• The Journal of Advanced Prosthodontics
• /
• v.8 no.3
• /
• pp.219-223
• /
• 2016

PURPOSE. This study aimed to create a digitized database of fabricated obturators to be kept for patients' potential emergency needs. MATERIALS AND METHODS. A chairside intraoral scanner was used to scan the surfaces of an acrylic resin obturator. The scanned data was recorded and saved as a single standard tessellation language file using a three-dimensional modeling software. A simulated obturator model was manufactured using fused deposition modeling technique in a three-dimensional printer. RESULTS. The entire obturator was successfully scanned regardless of its structural complexity, modeled as three-dimensional data, and stored in the digital system of our clinic at a relatively small size (19.6 MB). A simulated obturator model was then accurately manufactured from these data. CONCLUSION. This study provides a proof-of-concept for the use of digital technology to create a digitized database of obturators for edentulous maxillectomy patients.

• Fashion & Textile Research Journal
• /
• v.22 no.5
• /
• pp.595-606
• /
• 2020

This study develops an optimal two-dimensional (2D) pattern from three-dimensional human scan data by considering the cycling posture and dermatome of high school male cyclists. By analyzing the body surface change in the cycling posture and considering the dermatome of the lower limbs, the optimal cutting line setting and the development of cycling tights for individual cyclists were presented to provide data that could be used in the clothing industry. We designed three cycling tights to solve the size unsuitability. 3D design 1 is a non-extension design based on the analysis of the 3D human body scan data, in which parts were connected diagonally from the front of the knee to the back of the knee. 3D design 2 removed both the front and back to reduce air resistance during cycling. 3D design 3 did not have a cutting line on the front panel because of the air resistance during cycling in the front area. We analyzed the garment pressure for 8 points of lower body and performed a subjective evaluation of the 3D designed tights and the current cycling tights. The 3D design 1 in this study was well received in the omphalion, thigh, and hip area, while 3D design 3 was well received in the omphalion, thigh, hip, and bottom bands. Therefore, the LoNE of 3D design 1 was applied to the front, and the hip cutting line of 3D design 3 was applied to the back.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.97-109
• /
• 2022

Multi-dimensional coupling analysis is a research hot spot in nuclear reactor thermal hydraulic study and both the full-scale system transient response and local key three-dimensional thermal hydraulic phenomenon could be obtained simultaneously, which can achieve the balance between efficiency and accuracy in the numerical simulation of nuclear reactor. A one-dimensional to three-dimensional (1D-3D) coupling platform for the nuclear reactor multi-dimensional analysis is developed by XJTU-NuTheL (Nuclear Thermal-hydraulic Laboratory at Xi'an Jiaotong University) based on the CFD code Fluent and system code RELAP5 through the Dynamic Link Library (DLL) technology and Fluent user-defined functions (UDF). In this paper, the International Standard Problem (ISP) No. 43 is selected as the benchmark and the rapid boron dilution transient in the nuclear reactor is studied with the coupling code. The code validation is conducted first and the numerical simulation results show good agreement with the experimental data. The three-dimensional flow and temperature fields in the downcomer are analyzed in detail during the transient scenarios. The strong reverse flow is observed beneath the inlet cold leg, causing the de-borated water slug to mainly diffuse in the circumferential direction. The deviations between the experimental data and the transients predicted by the coupling code are also discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.552-556
• /
• 1997

The Direct Metal Prototyping(DMP), one of the rapid prototyping technologies, allows the manufacturing of three-dimensional metallic parts using metal powders directly from the CAD data. Laser power and scanning speed are the most important variables of the process. The objective of this study is to obtain the design data for laser power and scanning speed to bond metal powders effectively using the finite element method. To obtain the design values, a numerical analysis considering two-dimensional heat transfer during the sintering of metal powder layers of the process was performed. The laser beam has been modeled to have directionality in its heat flux distribution, i. e., in the scanning direction a Gaussian beam mode distribution has been assumed and in the thickness direction a square beam mode distribution. The three-dimensional irregular distribution of metal powders of the powder layer is idealized as two-dimensional distribution in which metal powders are located regularly and periodically on the plate. In this study the design values of laser power vs scanning speed have been obtained. Temperature distribution and temperature variation of the powder layers with respect to time have been predicted. The commputed dsign data will be useful in determining the initial conditions of the process.

• Journal of radiological science and technology
• /
• v.41 no.6
• /
• pp.595-602
• /
• 2018

Quality control (QC) of Computed Tomography (CT) devices is based on image quality measurement on AAPM CT phantom which is a standard phantom. Although it is possible to control the accuracy of the CT apparatus, it is expensive and has a disadvantage of low penetration rate. Therefore, in this study, we make image quality measurement phantom at low cost using FFF (Fused Filament Fabrication) type three-dimensional printer and try to analyze the usefulness, compare it with existing standard phantom. To print a phantom, We used three-dimensional printer of the FFF system and PLA (Poly Lactic Acid, density: $1.24g/cm^3$) filament, and the CT device of 64 MDCT (Aquilion CX, Toshiba, Japan). In addition, we printed a phantom using three-dimensional printer after design using various tool based on existing standard phantom. For image quality evaluation, AAPM CT phantom and self-generated phantom were measured 10 times for each block. The measured data were analyzed for significance using the Mannwhiteney U-test of SPSS (Version 22.0, SPSS, Chicago, IL, USA). As a result of the analysis, phantom fabricated with three-dimensional printer and standard phantom showed no significant difference (p>0.05). Furthermore, we confirmed that image quality measurement performance of a phantom using three-dimensional printer is similar to the existing standard phantom. In conclusion, we confirmed the possibility of low cost phantom fabrication using three dimensional printer.

• Journal of Korean Society of Rural Planning
• /
• v.11 no.2 s.27
• /
• pp.43-49
• /
• 2005

As information has been brought to public attention, information storage as well as information usability has been important. Rural information is produced in many areas and institutions. However, it is difficult to use rural information comprehensively. Since formats for management are various, it is difficult to have unified frame. In this research, a schema of database fer integrating rural data is designed to improve usability using dimensional modeling. First of all, rural data are analyzed for designing integrated rural database schema. Rural data used are 'National Agricultural Statistics' and 'Gun annual statistical report'. Analysis shows that there are three considerations; administrative district, time-dependency and classification of data. Considering these three requisite, we designed database schema using dimensional modeling. The reason of using dimensional modeling is to improve usability and effectiveness. If the database was designed using ER modeling, many tables have to be joined every searching time. Separately from integrated rural database schema, user's database schema is designed considering usability. Through user's database, users can modify data or generate new data and save these processes. These make it possible to use generated data repeatedly. We evaluate usability, contribution, and effectiveness of data manipulation on the integrated rural database. We propose an integrated rural database structure improving the accessibility and usability of rural data and information and verified the data model based on a practical example.

• Structural Engineering and Mechanics
• /
• v.54 no.5
• /
• pp.937-953
• /
• 2015

This paper investigates the load model for single footfall trace of human walking. A large amount of single person walking load tests were conducted using the three-dimensional gait analysis system. Based on the experimental data, Fourier series functions were adopted to model single footfall trace in three directions, i.e. along walking direction, direction perpendicular to the walking path and vertical direction. Function parameters such as trace duration time, number of Fourier series orders, dynamic load factors (DLFs) and phase angles were determined from the experimental records. Stochastic models were then suggested by treating walking rates, duration time and DLFs as independent random variables, whose probability density functions were obtained from experimental data. Simulation procedures using the stochastic models are presented with examples. The simulated single footfall traces are similar to the experimental records.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.431-434
• /
• 2006

This study reviews the properties of coastal ocean and Seomjin River estuary spaces then define some MGIS(Marine Geographic Information System) related terminologies for clarifying the scope of MGIS boundaries. Therefore, we show the three-dimensional circulation of MGIS-based Seomjin River Estuary integrating three-dimensional POM model and observed data.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.2
• /
• pp.85-94
• /
• 2006

The purpose of this study is to extract typical body shapes of Korean adults based on the three-dimensional Korean anthropometric data measured through 5th national anthropometric survey and to examine the suitability of the 3-D human shape data for the interior packaging. 36 three-dimensional anthropometric variables related to the design of vehicle interior were considered for the appraisal of typical body shapes. Four major factors were extracted by the factor analysis and factor scores were calculated for all subjects. Typical or standard drivers of Korean adults were selected by the minimum deviation criteria for the four factor scores with respect to 5th, 50th, and 95th percentiles, respectively. Typical drivers of Korean adults were visualized by the CATIA-HUMAN program due to the absence of proper application software for three-dimensionally scanned human body data. There are considerable differences between the anthropometric data of Korean adults and those provided by CATIA-HUMAN program, which shows that the modeling data provided by CATIA-HUMAN should not be directly applied to the ergonomic evaluation for the vehicle design. This suggests the necessity for the development of suitable software for scanned human shape data. It is also expected that the anthropometric data of typical drivers extracted from this study help design package layouts and improve the suitability of ergonomic evaluation for Korean customers.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.3
• /
• pp.20-25
• /
• 2000

This paper proposes the method of surface classification and threshold value selection for surface classification of the three-dimensional object recognition. The processings of three-dimensional image processing system consist of three steps, i.e, acquisition of range data, feature extraction and matching process. This paper proposes the method of shape feature extraction from the acquired rage data in the entire three-dimensional image processing system. In order to achieve these goals, firstly, this article proposes the surface classification method by using the distribution characteristics of sign value from range values. Also pre-existing method which uses the K-curvature and K-curvature has limitation in the practical threshold value selection. To overcome this, this article proposes the selection of threshold value for surface classification. Finally, the effectiveness of this article is demonstrated by the several experiments.