• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1915-1927
• /
• 1992

A three-dimensional Navier-Stokes code has been developed for analysis of viscous flows through turbomachinery blade rows or other internal passages. The Navier-Stokes equations are written in a cartesian coordinate system, then mapped to a general body-fitted coordinate system. Streamwise viscous terms are neglected and turbulent effects are modeled using the baldwin-Lomax model. Equations are discretized using finite difference method on the stacked C-type grids and solved using LU-ADI decomposition scheme. calculations are made for a two-dimensional cascade in a transonic wind-tunnel to see the infuence of the endwalls. The flow pattern of the three-dimensional flow near the endwall is found to be different from that of the two-dimensional flow due to the existence of the endwalls.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.8
• /
• pp.2681-2692
• /
• 1996

The finite-volume method for radiation in a three-dimensional non-orthogonal gas turbine combustion chamber with absorbing, emitting and anisotropically scattering medium is presented. The governing radiative transfer equation and its discretization equation using the step scheme are examined, while geometric relations which transform the Cartesian coordinate to a general body-fitted coordinate are provided to close the finite-volume formulation. The scattering phase function is modeled by a Legendre polynomial series. After a benchmark solution for three-dimensional rectangular combustor is obtained to validate the present formulation, a problem in three-dimensional non-orthogonal gas turbine combustor is investigated by changing such parameters as scattering albedo, scattering phase function and optical thickness. Heat flux in case of isotropic scattering is the same as that of non-scattering with specified heat generation in the medium. Forward scattering is found to produce higher radiative heat flux at hot and cold wall than backward scattering and optical thickness is also shown to play an important role in the problem. Results show that finite-volume method for radiation works well in orthogonal and non-orthogonal systems.

• Archives of Craniofacial Surgery
• /
• v.15 no.3
• /
• pp.109-116
• /
• 2014

Background: Infants with deformational plagiocephaly (DP) usually present with cranial vault deformities as well as facial asymmetry. The purpose of this study was to use three-dimensional anthropometric data to evaluate the influence of cranial deformities on facial asymmetry. Methods: We analyzed three-dimensional computed tomography data for infants with DP (n=48) and without DP (n=30, control). Using 16 landmarks and 3 reference planes, 22 distance parameters and 2 angular parameters were compared. This cephalometric assessment focused on asymmetry of the orbits, nose, ears, maxilla, and mandible. We then assessed the correlation between 23 of the measurements and cranial vault asymmetry (CVA) for statistical significance using relative differences and correlation analysis. Results: With the exception of few orbital asymmetry variables, most measurements indicated that the facial asymmetry was greater in infants with DP. Mandibular and nasal asymmetry was correlated highly with severity of CVA. Shortening of the ipsilateral mandibular body was particularly significant. There was no significant deformity in the maxilla or ear. Conclusion: This study demonstrated that the cranial vault deformity in DP is associated with facial asymmetry. Compared with the control group, the infants with DP were found to have prominent asymmetry of the nose and mandible.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.110-110
• /
• 2003

We attempted to establish the pattern remaking system using the three-dimensional data of the shape of clothes being worn, especially based on the knowledge of pattern construction. Moreover we tried to develop the deformable body model which can represent customers' body shape in the screen.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.567-572
• /
• 1988

As an efficient way of modeling bodies of complicated shapes, the sweeping and skinning operations have been implemented. These two operations are very powerful modeling method when the body is defined by the cross sections at various locations. For the implementation, the data structure for storing the cross sections and the resulting three dimensional body has been constructed. The resulting object is defined by the boundary representation based on the non-uniform nonperiodic B-spline surface.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.185-191
• /
• 2001

In many papers, the powertrain system generally has been madeled as one-dimensional torque model. One-dimensional powertrain model may calculate the torque correctly but it does not consider the non-rotational degrees-of-freedom of the powertrain components and the interaction of these degrees-of-freedom with the vehicle body frame and suspension. To consider the non-rotational degrees of freedom, the differential is modeled as a three-dimensional rigid body in this paper. A constant velocity joint is newly formulated and a relative constraint is also formulated to model the motion transfer due to gear ratio of the differential. Implementing the proposed powertrain system in the multibody model, more detail dynamic responses can be obtained. Obtained outputs such as reaction torques on the constant velocity joint and reaction forces on the rack can be useful data in the design of a powertrain.

• Journal of the Korean Society of Costume
• /
• v.24
• /
• pp.143-155
• /
• 1995

Unlike pure art such as painting and sculpture, dressmaking , a field of special plastic art, is characterized by its physical and functional nature. Having an inseparable relation with form, it is a field of art expressiion the human innersense of beauty in correlation with other various fields of art. In this respect, I think it should be necessary for us to study the forms of art from the past in order to study the forms of art from the past in order to study the correlations and mutual influencies between forms of pure art and dressmaking and to understand modern dressmaking from the standpoint of art. In this context, this study is an attempt to analze how the form and characteristics of OP ART , which represents the trends of the 1960's is embodied in modern dresses. The results are as follows : Fist , the expression of OP ART in dresses have visual effects harmonizing with bodily movements and , also, expanded the range and dynamics of expression which resulted from the introduction of visual phenomena in a fresh new sense by not limiting itself to the suggestion of patterns of OP ART. Second, OP ART paintings expressed the mobility and rhythimicity of a body in a limited space in a two-dimensional plane way of expression . When a dress is worn, however, it expands such mobility and rhythmicity in a cubic , three-dimensional way, maximizing the effects of , and boldly expression, OP ART, it can also create a new silhuette and ability of formation by seeking an open expression of OP ART rather than an expression of OP ART it self , due to the infinite possibility and unpredictability by the dynamics of movements and the elements principle of designs. Third , by applying the patterns of OP ART to dresses, we can obtain special visual effects of design, cover up the body's weak points, and create a desired three -dimensional sense by highlighting the beauty of the body's curved lines. Although modern dresses and OP ART are different genres of art, both have something in common in their pusuits. Since there is a infinite possibility in OP ART, there should be continuous attempts to combine dresses and art satisfying the sense of the times, which will lead dressmaking to a higher-dimensional dressmaking plastic art.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.04a
• /
• pp.113-118
• /
• 1997

This paper presents the dimensional synthesis and kinematic analysis of the RSCS-SSP motion generating spatial mechanism using the displacement matrix method. This type of spatial mechanisms is used for the Mcpherson suspension in small automobiles. It is modeled for the wheel bump/rebound and steering motion. First, the suspension is modeled as a multiloop spatial rigid body guidance mechanism for the two major motions. Then the design equations for SSP, RS, and SC strut links are applied to synthesize an RSCS-SSP for up to three prescribed positions for the steering motiom from the suspension design specification. Thus a RSCS-SSP mechanism which is synthesized is also analyzed for the displacement during the steering motion.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.1
• /
• pp.181-210
• /
• 1997

The stress distribution generated in the surrounding bone was calculated and compared for various geometry of the dental implants by means of the finite element methods. The models were designed to represent the screw type endosseous implants(varing the size, shape, direction of the screw thread and the angle of the body) with supporting bone and the cylinder type endosseous implants(varing the lower portion-Round type, tapered type) with supporting bone. Static mean bite forces were applied 100N vertically and 25N horizontally on the center of the implant and three dimensional finite analysis was undertaken using software ANSYS 5.1 Version. The result demonstrated that different implant shape leads to significant variations in stress distribution in the bone. In the case of variation of the screw size, direction and shape the implant model with normally directional and triangular screw implied lower stress than with upper directional or lower directional and quadrangular screw but among models a different screw size, within a variation of 0.2mm there was no meaningful difference in maximum stress. In the case of variation of angle of body the straight implied lower stress than the tapered. As a result of analysis of cylinder type, the implants with larger radius of curvature of the round form and larger diameter of the tapered form implied lower stress.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.10
• /
• pp.1213-1222
• /
• 1999

A finite element method is developed for calculating the temperature and enthalpy distribution and accordingly the solid, liquid and mushy zone in a three-dimensional body subjected to any heat boundary conditions. The method concurrently consider both temperature and enthalpy for consideration of the latent heat effect, differently from other methods of using a special energy balance equation for solving a mushy zone. The developed brick element has eight nodes with one degree of freedom at each node. The numerical method and procedure are verified using the results of one and two dimensional analytic solutions and by other researchers. It is shown that the present method presents a consistent and stable results in either abrupt or ranged phase change problems. Moreover, the numerical results by the present method are hardly effected by the calculation time steps which otherwise are difficult to determine in most phase change problems. Finally, as a three-dimensional application, a T-shaped body of a phase change is presented and the temperature and enthalpy variation along the time are solved.