• 한국산업융합학회 논문집
• /
• 제20권2호
• /
• pp.195-204
• /
• 2017

Predicting the failure life of automated manufacturing systems can reduce overall downtime, maintenance costs, and total plant operation costs. Therefore, there is a growing interest in fatigue failure mechanisms as the safety or service life assessment of manufacturing systems becomes an important issue. In particular, fretting fatigue is caused by repeated tangential stresses that are generated by friction during small amplitude oscillatory movements or sliding between two surfaces pressed together in intimate contact. Previous studies in fretting fatigue have observed size effects related to contact width such that a critical contact width exists where there is drastic change in the fretting fatigue life. However, most of them are the two-dimensional finite element analyses based on the plane strain assumption. The purpose of this study is to investigate the contact size effects on the three-dimensional finite element model of a finite width of a flat specimen and a cylindrical pad exposed to fretting fatigue. The contact size effects were analyzed by means of the stress and strain averages at the element integration points of three-dimensional finite element model. This study shows that the fretting fatigue life of manufacturing systems can be predicted by three-dimensional finite element analysis based on SWT critical plane model.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.35.1-35.1
• /
• 2011

When the wind speed is measured by the met-mast sensor it is distorted due to the shadow effect of tower. In this paper the tower shadow effect is analyzed by a computational fluid dynamics code. First three dimensional modeling and flow analysis of the met-mast system were performed. The results were compared with the available experimental wind-tunnel test data to confirm the validity of the meshes and turbulence model. Two-dimensional model was then developed based on the three-dimensional works and experimental data. 2D analysis for various Reynolds numbers and turbulence strengths were then performed to establish the tower shadow effect database, which can be utilized as correction factors for the measured wind energy.

• 한국수소및신에너지학회논문집
• /
• 제26권4호
• /
• pp.386-392
• /
• 2015

Flow characteristics inside a 10 inch ball valve have been analyzed using three-dimensional numerical analysis and experiments. Continuity and three-dimensional Reynolds-averaged Navier-Stokes equations have been used as governing equations for the numerical analysis. The numerical model has been constructed through the grid dependency test and validation with the results of experiments to ensure reliability and numerical effectiveness. The shear stress transport (SST) model has been used as the turbulence closure. The experimental test-rig has been constructed to measure pressure, temperature and flow rate along the pipeline. Some valve opening angles have been tested to evaluate the flow characteristics inside the ball valve and pipeline. The results show that the rapid pressure variations is observed while the valve opening angle decreases, which caused by flow separation at the downstream of the ball valve.

• 한국압력기기공학회 논문집
• /
• 제19권2호
• /
• pp.75-83
• /
• 2023

For three-dimensional finite element welding residual stress simulation, several methods are available. Two widely used methods are the moving heat source model using heat flux and the temperature boundary condition model using the temperature profile of the welded beads. However, each model has pros and cons in terms of calculation times and difficulties in determining welding parameters. In this paper, a new method using the moving temperature profile model is proposed to perform efficiently 3-D FE welding residual stress analysis for large structures. Comparison with existing experimental residual stress measurement data of two-pass welding pipe and SNL(Sandia National Laboratories) mock-up canister shows the accuracy and efficiency of the proposed method.

• 한국지반공학회지:지반
• /
• 제7권3호
• /
• pp.21-32
• /
• 1991

본 연구에서는 복합 zone을 가진 rockfill dam성토 재료의 강도정수들과 core zone에서의 간극 수압의 불확정성을 고려할 수 있도록, 성토 재료의 공간적인 변화의 불확실성, 시료수의 제한에 의 한 불확정성에 실험실 결과와 현장 결과와의 차이에 따른 model 오차의 영향을 고려한 종합적인 설계변수들의 불확정성을 규명하였으며 core zone의 간극수압과 rockfill zone의 내부 마찰각을 bayeg 이론을 이용하여 불확정성을 Updating할 수 있는 방법을 제시하였다. 사면 안정 해석에서 시공직후 상, 하류, 만수위 상, 하류 수위, 급강하 시의 2차원 사면안정해석 과 end effect 영향을 고려한 3차원사면 안정해석을 하였다. 본 목적을 위하여 복합 zone을 가진 rockfill dam의 사면 안정해석에서 end effect의 영향을 고려한 3차원 사면안정해석 Program인 "ESTABL"을 개발하였으며, 파괴 사면의 강도정수와 간극수압의 변동계수를 구하는 프로그램 "COV", 복합 zone사면 안전율의 변동계수를 구하는 프로그램 "PCOV"을 개발하였다. 사면안정해석 결과 3차원안전율이 2차원안전율보다 약 200A정도 크게 나타나므로 end restraint 효과가 상당히 큼을 알 수 있다. 3차원사면안정은 근본적으로 system reliability 문제이 므로 안전율의 평균간보다 그 불확정성이 더 큰 영향을 미침을 보여준다. 또한 기초설계 치로 설계 를 마친후 시공중 혹은 추가로 각종 계측치가 있을 때 updating 이론을 이용하여 신뢰도를 증가시 킬 수 있음을 보여주며 강도계수의 변화에 의한 파괴확률의 변화는 점착력의 불확정성이 내부마찰 각의 불확정성보다 민감하게 영향을 미침을 보여준다.찰 각의 불확정성보다 민감하게 영향을 미침을 보여준다.

• 한국농공학회논문집
• /
• 제48권6호
• /
• pp.69-77
• /
• 2006

In this study, the large scaled model test improved by sand drain was carried out to clarify the internal behavior of the three-dimensional consolidation under different secondary consolidation periods. From the results of model test, the void ratio in the undrained side was lager than in the drained side. In addition, the unconfined compressive strength in the long-term consolidated specimen was larger than that in the short-term consolidated one. It was also found that the unconfined compressive strength was larger in the drained side than in the undrained side. These reasons are considered to be due to the large effective stress by quick pore water pressure dissipation by the short drainage distance in the drained side. Furthermore, in order to investigate the three-dimensional consolidation behavior of clay ground improved by the vertical drain method, the numerical analysis obtained from the three-dimensional elasto-viscous consolidation theory proposed by author (2006) were compared with the test results. It was found that during the three-dimensional consolidation process not only vertical displacement but also radial displacement occurs inside the specimen.

• 한국추진공학회지
• /
• 제22권6호
• /
• pp.47-55
• /
• 2018

축 대칭 형상의 핀틀 노즐에서 3차원 효과 여부를 파악하기 위하여 3차원 수치해석을 수행하였다. 초음속 노즐을 통해 배출되는 압축성 유동을 정확히 예측하기 위해 k-${\omega}$ SST 난류 모델에 압축성 보정 모델을 결합하였다. 핀틀의 전단과 후단에서 재순환 영역이 관찰되었으며, 노즐을 통해 분출되는 유동은 복잡한 충격파 구조를 형성하였다. 각 핀틀 위치에서 2차원 축대칭과 3차원의 수치해석 결과를 실험데이터와 비교해 볼 때 3차원 결과가 접선 방향 유동의 3차원 효과로 인해 유동 박리 위치와 박리로 인한 압력 상승 변화과정을 정확히 예측하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.173-183
• /
• 2010

Numerical analysis using a three dimensional finite element program(ABAQUS) is a powerful method which can evaluate the soil-pile-structure interaction under the dynamic loading and reduce the computation time significantly, but has not be widely used because modeling a soil-pile system and setting the parameter for the entire model are difficult and a three dimensional finite element program is not user friendly. However, a three dimensional finite element program is expected to be widely used because of advance in research of modeling technique and development of the modeling and visualization. In this study, ABAQUS is used to simulate the 1g shaking table model pile test, and the numerical results are compared with the 1g shaking table test results. The application about the soil stiffness and boundary condition change is estimated and then parametric study for various input acceleration amplitudes, various input frequencies, and various surcharge is carried out.

• 소음진동
• /
• 제9권1호
• /
• pp.206-213
• /
• 1999

선박의 보-유추 진동해석에 있어 2차원 부가수질량의 3차원 효과를 고려하기 위해서 3차원 수정계수(J-factor)를 계산해야 하는데 광폭선의 경우에는 J-factor의 계산이 부정확하고 번거롭다. 이 논문에서는 이를 개선하기 위해 새로운 선박의 보-유추 접수진동해석 방법을 소개하였다. 이 방법은 선박에 접수된 유체에 대해 BEM 기법을 이용하여 3차원 유체력을 직접 계산하고 이를 일정 간격으로 나눈 각 스트립에 집중질량으로 평가한 후에 선체의 보모델과 결합하여 보-유추 진동해석을 수행하는 방법이다. 오픈탑 컨테이너선의 모델에 대해 기존의 보-유추 진동해석방법과 이 논문에서 제시한 새로운 진동해석방법을 이용하여 진동해석을 수행하고 가진 실험에 의한 진동계측결과와 상호 비교함으로써 새로운 방법의 유용성을 검증하였다.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.888-895
• /
• 2022

Lately, ocean nuclear power plants have attracted attention as one of diverse uses of nuclear power plants. Because ocean nuclear power plants are movable or transportable, it is necessary to analyze the thermal hydraulics in a moving frame of reference, and computer codes have been developed to predict thermal hydraulics in large moving systems. The purpose of this study is to incorporate a three dimensional dynamic motion model into the SPACE code (Safety and Performance Analysis CodE) so that the code is able to analyze thermal hydraulics in an ocean nuclear power plant. A rotation system that describes three-dimensional rotations about an arbitrary axis was implemented, and modifications were made to the one-dimensional momentum equations to reflect the rectilinear and rotational acceleration effects. To demonstrate the code's ability to solve a problem utilizing a rotational frame of reference, code calculations were conducted on various conceptual problems in the two-dimensional and three-dimensional pipeline loops. In particular, the code results for the three-dimensional pipeline loop with a tilted rotation axis agreed well with the multi-dimensional CFD results.