Acknowledgement
이 성과는 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임(NRF-2019M2D2A2048296)
References
- Bunn, M. G., Weeks, J., Holdren, J. P., MacFarlane, A. M., Pickett, S. E., Suzuki, A., and Suzuki, T., 2001, "Interim Storage of Spent Nuclear Fuel: A Safe, Flexible, and Cost-Effective Approach to Spent Fuel Management", Harvard University and University of Tokyo.
- Feng, Z. (Ed.)., 2005, Processes and mechanisms of welding residual stress and distortion, Elsevier, Cambridge.
- Xie, Y., and Zhang, J., 2015, "Chloride-induced stress corrosion cracking of used nuclear fuel welded stainless steel canisters: A review", J. Nucl Mater, Vol. 466, pp. 85-93. doi:https://doi.org/10.1016/j.jnucmat.2015.07.043
- Tani, J. I., Mayuzumi, M., Arai, T., and Hara, N., 2007, "Stress corrosion cracking growth rates of candidate canister materials for spent nuclear fuel storage in chloride- containing atmosphere", Mater Trans, Vol. 48, No. 6, pp. 1431-1437. doi:https://doi.org/10.2320/matertrans.MRA20063 67
- Park, S. J., Kim, H. T., and Kim, Y. J., 2022, "Sensitivity Analysis of Heat Source Parameter for Predicting Residual Stress Induced by Electron Beam Welding", Trans. of the KPVP, Vol. 18, No. 2, pp. 61-68. doi:https://doi.org/10.20466/KPVP.202.18.2.061
- Soh, N. H., Oh, G. J., Huh, N. S., Lee, S. H., Park, H. B., Lee, S. G., Kim, J. S., Kim, Y. J., 2012, "Effect of Finite Element Analysis Parameters on Weld Residual Stress of Dissimilar Metal Weld in Nuclear Reactor Piping Nozzles", Trans. of the KPVP, Vol. 8, No. 1, pp. 8-18. https://doi.org/10.20466/KPVP.2012.8.1.008
- Goldak, J., Chakravarti, A., and Bibby, M., 1984, "A new finite element model for welding heat sources", Metall trans B, Vol. 15, pp. 299-305. doi:https://doi.org/10.1007/BF02667333
- Seles, K., Peric, M., and Tonkovic, Z., 2018, "Numerical simulation of a welding process using a prescribed temperature approach", J. Constr Steel Res, Vol. 145, pp. 49-57. doi:https://doi.org/10.1016/j.jcsr.2018.02.012
- Deng, D., and Murakawa, H., 2006, "Numerical simulation of temperature field and residual stress in multi-pass welds in stainless steel pipe and comparison with experimental measurements", Comp Mater Sci, Vol. 37, No. 3, pp. 269-277. doi:https://doi.org/10.1016/j.commatsci.2005. 07.007
- NRC, 2013, "Finite Element Analysis of Weld Residual Stresses in Austenitic Stainless Steel Dry Cask Storage System Canisters", U.S. Nuclear Regulatory Commission, Washington, DC.
- ABAQUS, 2018, "ABAQUS Standard/User's Manual, Version 6.4," Hibbit Karlsson and Sorensen, Inc.
- Song, T. K., Bae, H. Y., Kim, Y. J., Lee, K. S., and Park, C. Y., 2008, "Sensitivity analyses of finite element method for estimating residual stress of dissimilar metal multi-pass weldment in Nuclear power plant", Trans. Korean Soc. Mech. Eng. A, Vol. 32, No. 9, pp.770-781. doi:https://doi.org/10.3795/KSME-A.2008.32.9.770
- Leggatt, N. A., Dennis, R. and Hurrel, P. R., 2007, "Modeling the Fabrication of a Pressure Vessel Toroidal Seal," ASME 2007 PVP Conference, San Antonio, Texas, July 22-26, Vol. 42843, pp. 839-849. PVP2007-26145.
- Dennis, R. J., Leggatt, N. A. and Gregg, A., 2006, "Optimisation of Weld Modeling Techniques : Bead on Plate Analysis," ASME 2006 PVP Conference, Vancouver, BC, July 23-27, Vol. 47578, pp. 967-978, PVP2006-ICPVT-11-93907.
- Enos, D., and Bryan, C. R., 2016, "Characterization of Canister Mockup Weld Residual Stresses," Sandia National Lab, Albuquerque, NM, SAND2016-12375R.