DOI QR코드

DOI QR Code

Internal Flow Analysis for a 10 inch Ball Valve using Flow Similarity

유동상사를 이용한 10인치 볼밸브 내부유동 분석

  • LEE, SANG-MOON (Environmental & Plant Engineering Research Div., Korea Institute of Civil Engineering and Building Technology) ;
  • JANG, CHOON-MAN (Environmental & Plant Engineering Research Div., Korea Institute of Civil Engineering and Building Technology)
  • Received : 2015.07.21
  • Accepted : 2015.08.30
  • Published : 2015.08.30

Abstract

Flow characteristics inside a 10 inch ball valve have been analyzed using three-dimensional numerical analysis and experiments. Continuity and three-dimensional Reynolds-averaged Navier-Stokes equations have been used as governing equations for the numerical analysis. The numerical model has been constructed through the grid dependency test and validation with the results of experiments to ensure reliability and numerical effectiveness. The shear stress transport (SST) model has been used as the turbulence closure. The experimental test-rig has been constructed to measure pressure, temperature and flow rate along the pipeline. Some valve opening angles have been tested to evaluate the flow characteristics inside the ball valve and pipeline. The results show that the rapid pressure variations is observed while the valve opening angle decreases, which caused by flow separation at the downstream of the ball valve.

Keywords

References

  1. D. S. Kim and M. S. Kim, "Analysis and Design of Cryogenic Ball valve", Proceedings of the 7th JFPS International Symposium on Fluid Power, September 15-18, 2008, P1-26.
  2. A. Ozdamar, K. T. Gursel, Y. Pekbey, and B. Celikag, "An Experimental and Numerical Study on Pressure Drop Coefficient of Ball Valves", International Energy Journal, Vol. 8, Issue 4, 2007, pp. 1-7.
  3. S. F. Moujaes and R. Jagan, "3D CFD Predictions and Experimental Comparisons of Pressure Drop in a Ball Valve at Different Partial Openings in Turbulent Flow", Journal of Energy Engineering, Vol. 134, 2008, pp. 24-28. https://doi.org/10.1061/(ASCE)0733-9402(2008)134:1(24)
  4. M. J. Chern, C. C. Wang, and C. H. Ma, "Performance test and flow visualization of ball valve", Experimental Thermal and Fluid Science, Vol. 31, 2007, pp. 505-512. https://doi.org/10.1016/j.expthermflusci.2006.04.019
  5. M. J. Chern and C. C. Wang, "Control of Volumetric Flow-Rate of Ball Valve Using V-Port", Journal of Fluids Engineering, Vol. 126, 2004, pp. 471-481. https://doi.org/10.1115/1.1760536
  6. A. S. Tabrizi, M. Asadi, G. Xie, G. Lorenzini, and C. Biserni, "Computational Fluid-Dynamics-Based Analysis of a Ball Valve Performance in the Presence of Cavitation", Journal of Engineering Thermophysics, Vol. 23, No. 1, 2014, pp. 27-38. https://doi.org/10.1134/S1810232814010044
  7. ANSYS, ANSYS CFX-14.0 Solver Theory, 2012, Ansys Inc.
  8. F. R. Menter, "Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications", AIAA Journal, Vol. 32, 1994, pp. 1598-1605. https://doi.org/10.2514/3.12149
  9. S. M. Lee and C. M. Jang, "Development of Numerical Model and Experimental Apparatus for Analyzing the Performance of a Ball Valve used for Gas Pipeline in Permafrost Area", Trans. of the Korean Hydrogen and New Energy Society, Vol. 25, No. 5, 2014, pp. 550-559. https://doi.org/10.7316/KHNES.2014.25.5.550

Cited by

  1. A Study on Influence of Ball Valve and Upstream Curved Pipe on Internal Flow of Pipeline vol.26, pp.5, 2015, https://doi.org/10.7316/KHNES.2015.26.5.463
  2. Assessment of Gas Leakage for a 30-inch Ball Valve used for a Gas Pipeline vol.27, pp.2, 2016, https://doi.org/10.7316/KHNES.2016.27.2.230
  3. Experimental Study on the Internal Flow of a Ball Valve used for a Gas Pipeline vol.27, pp.3, 2016, https://doi.org/10.7316/KHNES.2016.27.3.311
  4. Evaluation of Numerical Model of a Ball Valve used for a Gas Pipeline vol.27, pp.6, 2016, https://doi.org/10.7316/KHNES.2016.27.6.764
  5. Performance analysis of a ball valve used for gas pipelines by introducing nondimensional parameters vol.11, pp.1, 2019, https://doi.org/10.1177/1687814018823350