• 한국정보과학회논문지:시스템및이론
• /
• 제34권12호
• /
• pp.656-664
• /
• 2007

Field-Programmable Gate Arrays는 사용자가 프로그램이 가능한 혁신적인 대규모 집적 회로이며 값싸고 빠르게 주문자가 원하는 VLSI 구현할 수 있는 장점을 가지고 있다. 그러나 특정 목적의 프로그램의 속도가 증가했을 때 FPGA가 연산하는 동안의 전력 소모와 연결선의 지연이 FPGA를 프로그램 하는데 중요한 문제점이 된다. 특히 기존 구조에서 사용되는 내부연결선이 전체 FPGA의 전력 중 65%를 소모한다. 이로 인하여 내부연결선이 전력 소모에 큰 영향을 주기 때문에 배선 시 연결선의 길이와 블록 간의 연결선을 줄임으로써 전력 소모를 줄일 수 있다. 배선 시 내부연결선을 줄이기 위한 방안으로 3차원 FPGA가 제안되었다. 하지만 구조의 복잡해짐으로써 오히려 스위치에서 물리적인 연결선들은 더욱 증가하고 스위치의 면적이 증가하는 문제점을 가지게 되었다. 본 논문에서는 복잡성을 낮추어서 물리적인 내부 연결선의 길이를 줄이고, 배선시의 연결선의 길이를 3차원 FPGA만큼 줄일 수 있는 FPGA구조를 제안한다. 그리고 ISE 의 FPGA Editor와 배선 시 길이를 예측하는 프로그램을 사용하여 Xilinx사의 Virtex II FPGA와 3D FPGA의 연결선 구성을 비교한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 추계 학술대회논문집
• /
• pp.86-91
• /
• 2000

Automatic method for generation of mesh and three dimension natural convection flow result adapted by this method are presented in this paper. It lake long time to meshing com plex 3-D geometries, and It's difficult to clustering grid at surface boundary. Octree structure resolve this difficulty.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.189-190
• /
• 2005

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제42권
• /
• pp.18.1-18.9
• /
• 2020

Background: Bone grafting has been considered the gold standard for hard tissue reconstructive surgery and is widely used for large mandibular defect reconstruction. However, the midface encompasses delicate structures that are surrounded by a complex bone architecture, which makes bone grafting using traditional methods very challenging. Three-dimensional (3D) bioprinting is a developing technology that is derived from the evolution of additive manufacturing. It enables precise development of a scaffold from different available biomaterials that mimic the shape, size, and dimension of a defect without relying only on the surgeon's skills and capabilities, and subsequently, may enhance surgical outcomes and, in turn, patient satisfaction and quality of life. Review: This review summarizes different biomaterial classes that can be used in 3D bioprinters as bioinks to fabricate bone scaffolds, including polymers, bioceramics, and composites. It also describes the advantages and limitations of the three currently used 3D bioprinting technologies: inkjet bioprinting, micro-extrusion, and laserassisted bioprinting. Conclusions: Although 3D bioprinting technology is still in its infancy and requires further development and optimization both in biomaterials and techniques, it offers great promise and potential for facial reconstruction with improved outcome.

• 한국의류산업학회지
• /
• 제12권6호
• /
• pp.796-811
• /
• 2010

Research materials of Korean traditional shoes have so far been mainly literary explanations or plane pictures expressed on the basis of the explanations and photographs of incomplete forms of relics excavated and it makes us have difficulty in observing them visually and producing products with them by design application. This project is to establish database of literal data of Korean traditional shoes and visual data using 3D in order to make the foundation of developing culture industry contents using Korean traditional shoes. According to the initial research plan. first. it analyzed and arranged the Korean traditional shoes into period. sex and function as the research goals of the first year. categorized the form. composition. materials. patterns. and colors of traditional shoes and then database of the materials was performed with text. Second. visual image materials including forms. composition. materials. patterns. and colors of traditional shoes were established as database with scanner. digital camera and computer 2D. Results of such a database will be able to be used as important materials which can be the foundation of culture industry contents development of traditional shoes and be the materials for developing digital culture contents of traditional shoes and teaching Korean traditional culture.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1697-1704
• /
• 2018

As a key component of lighting location system (LLS) for lightning warning, the atmospheric electric field measuring is required to have high accuracy. The Conventional methods of the existent electric field measurement meter can only detect the vertical component of the atmospheric electric field, which cannot acquire the realistic electric field in the thunderstorm. This paper proposed a three dimensional (3D) electric field system for atmospheric electric field measurement, which is capable of three orthogonal directions in X, Y, Z, measuring. By analyzing the relationship between the electric field and the relative permittivity of ground surface, the permittivity is calculated, and an efficiency 3D measurement model is derived. On this basis, a three-dimensional electric field sensor and a permittivity sensor are adopted to detect the spatial electric field. Moreover, the elevation and azimuth of the detected target are calculated, which reveal the location information of the target. Experimental results show that the proposed 3D electric field meter has satisfactory sensitivity to the three components of electric field. Additionally, several observation results in the fair and thunderstorm weather have been presented.

• The Korean Journal of Physiology and Pharmacology
• /
• 제3권5호
• /
• pp.491-499
• /
• 1999

This study was designed to evaluate the efficacy of dynamic parameters, such as correlation dimension $D_2,$ by comparing spectral electroencephalographic (EEG) parameters. These parameters are used to estimate the depth of halothane anesthesia as defined by the presence of body movement in response to a tail clamp. Six rats were used and each of them was exposed to halothane sequentially at the concentrations of 0%, 0.5%, 1.0% and 1.5% for 30 min. A tail clamp was applied every five min and the movements were recorded at each concentration level. The spectral parameters and the dynamic parameters were derived from 20-sec and 10-sec segments, respectively, from the last 5-mins of EEG recording at each concentration level. Correlation coefficients between the parameters and the movements were calculated. Standardized values of three parameters, betaL power, median power frequency (MPF), and $D_2$ were derived by calculation based on the number of animals showing the movement in response to a tail clamp. The betaL power had the largest correlation coefficient to spontaneous movement and to the response to a tail clamp than any other band parameter. MPF had a better correlation with the movement than 90% spectral edge frequency. Among the dynamic parameters, $D_2$ on the parietal cortex had a better correlation with the movement. The level of deviation and variation of standardized $D_2,$ MPF, and betaL were significant (p<0.01). The order of deviation and variation was; betaL power > MPF > $D_2.$ The correlation dimension serves as a better index for the depth of halothane anesthesia defined in forms of a response to external stimulation.

• 대한산업공학회지
• /
• 제23권1호
• /
• pp.215-222
• /
• 1997

This paper deals with the problem of generating a uniform tetrahedral mesh which fills a 3-D space with the tetrahedra which are close to the equilateral tetrahedra as possible. This problem is particularly interesting in finite element modeling where a fat triangulation minimizes the error of an analysis. Fat triangulation is defined as a scheme for generating an equilateral triangulation as possible in a given dimension. In finite element modeling, there are many algorithms for generating a mesh in 2-D and 3-D. One of the difficulties in generating a mesh in 3-D is that a 3-D object can not be filled with uniform equilateral tetrahedra only regardless of the shape of the boundary. Fat triangulation in 3-D has been proved to be the one which fills a 3-D space with the tetrahedra which are close to the equilateral as possible. Topological and geometrical properties of the fat triangulation and its application to meshing algorithm are investigated.

• Applied Microscopy
• /
• 제37권2호
• /
• pp.143-146
• /
• 2007

The objects of the nature have three dimensional (3-D) parameters. The 3-D profiles are embedded on the photographs and microscopic images. To understand 3-D configuration, stereo pair image with thick section is frequently employed. The perception of 3-D images is possible with the aid of stereoscopic glasses, although the expert can perceive 3-D images without the glasses. Anaglyphic stereo images are constructed by various softwares from commercial and freeware. Here we would like to present an easy anaglyphs construction method with Adobe $Photoshop^{(R)}$ based on tilting paired images from high voltage electron microscope. The anaglyphic stereo images constructed revealed the same 3-D perception with conventional stereoscopy. We could zoom in/out the anaglyph image digitally to investigate the detail configuration by real time. This method is expected to contribute to understanding complex structures 3 dimensionally.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.166-169
• /
• 2006

Our country's coast is vulnerable area to natural disaster which the repetitive damages occur every year including a loss of lives, the damage of facilities and erosion mostly except for the east coast because of a typhoon, tidal waves, sea water overflowing by topographic structure of low-lying gentle slope and shallow sea. However, as for prevention of natural disaster occurring every year, the situation is that it's centered on the restorationcentered measures and the general disaster prevention research to minimize damages at the time of disaster occurrence is insufficient. This study intendedlop t to devehe techniques possible for real time sampling of damage prediction areas on Web in order to support decision making for damage prevention and establishment of disaster prevention policy. For this, the thematic map was produced related to disaster based on high-resolution satellite picture, and the environmental DB similar to real world was constructed through topographic construction of three-dimension integrating the parts of land and the sea. In addition, the system was developed possible for the expression of damageable regions by real time grasp of dangerous regions at the time of disaster occurrence through over flowing simulation of three-dimension, and it's intended to prepare a basis to minimize damages to disaster situations through it.