• 제목/요약/키워드: Thread-X

검색결과 31건 처리시간 0.025초

단백질계 배지로 이루어진 금속사의 분석과 보존처리 - 16세기 임백령 묘 출토 단령의 직금 흉배를 중심으로 - (Analysis and Conservation of Metal Thread Made of Proteinaceous Substrate - Golden Decorative Rank Badge of an Official Uniform Excavated from Baekryeong Im's Tomb in the 16th Century of Korea -)

  • 노수정;오준석
    • 복식
    • /
    • 제58권9호
    • /
    • pp.129-141
    • /
    • 2008
  • Jikgeum(woven with supplementary golden wefts) hyungbae(rank badge) of danryung(official uniform) excavated from Im Backryung'tomb($1498{\sim}1546$) of the Joseon dynasty($1392{\sim}1910$) at Goyang, Gyunggi-Do in 2007, was in a critical condition because of serious collapse of substrate in metal thread. For conservation of hyungbae, metal thread was examined by different scientific methods(Light Microscope, Scanning Electron Microscope and Energy Dispersive X-Rray Spectrometry(SEM-EDS), Fourier Transform Infrared Spectroscopy(FT-IR)). Analytical data showed that metal thread was gilt membrane strip composed of gold leaves and proteinaceous substrate which was probably parchment. To protect collapse of substrate, 1% solution of Paraloid B-72 was infilterated into substrate for consolidation of substrate and it was adhered to warp of fabric in hyungbae, before wet cleaning. After wet cleaning, the most of the gold leaves were restored, which was confirmed by both the examination with the naked eye and the microscopic examination.

멀티스레드 기반 PO법 시뮬레이션 (Simulation of PO method based on Multi-thread)

  • 김태용;이훈재
    • 한국정보통신학회논문지
    • /
    • 제15권11호
    • /
    • pp.2301-2306
    • /
    • 2011
  • 현재 범용성이 높은 전자계 시뮬레이터가 널리 보급되어 왔으며, 안테나 설계, EMC 설계, 측정, 초고주파 소자 설계 등에 활용되고 있다. 본 연구에서는 X 밴드 영역에서 다양한 전자계 문제 해석을 목적으로 멀티 코어 기반 PC 자원을 보다 효율적으로 활용하고, 나아가 TCP/IP 기반 네트워크 토폴로지 구성을 통한 효율성 높은 전자계 시뮬레이터 구현을 위한 프레임워크 구축과 구현 방안을 제안하고 그 유효성을 검증하였다.

중국과 한국 전통금사 금속의 과학적 분석 연구 (Scientific Analysis of Metal in Chinese and Korean Traditional Gold Thread)

  • 정선혜;유지아;정용재;심연옥
    • 한국의류학회지
    • /
    • 제37권6호
    • /
    • pp.764-771
    • /
    • 2013
  • The metal component of Chinese and Korean traditional gold thread was analyzed nondestructively using P-XRF and classified morphologically. In the nondestructive analysis of 22 Chinese and Korean artifacts, there were 10 gold threads made up of Au in China and 7 in Korea; in addition, there were 4 silver threads made up of Ag in Korea and 1 copper thread made up of Cu in China. In the morphological classification, 7 gilt paper strips were confirmed in China and Korea and 4 wrapped threads were identified in China and Korea. Zn, Sn and Fe (minor components of the threads) were detected. These components were assumed to be transferred from the metal found in burial goods.

일체형 디지털 방송수신기개발에 관한 연구 (Study of Digital Broadcast Reciever Set)

  • 송재종;이석필
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.213-215
    • /
    • 2005
  • 본 논문의 목표는 일체형 디지털 방송 과 데이터 방송 그리고 아날로그 방송을 수신할 수 있는 일체형 디지털 방송 수신기 구현과 일체형 디지털 방송 수신기에서 아날로그 방송과 영상을 입력 받았을때 화질저하의 원인이되는 De-interlace 알고리즘과3-D Noise를 적절하게 제거할 수 있는 알고리즘에 관한 연구가 목표이다. 또한, 디지털 방송의 수신된 컨텐츠를 다른 저장매체로 불법적으로 복사, 재생을 막기 위한 디지털 컨텐츠 복사를 방지할 수 있는 알고리즘에 관한 연구이다. 현재, 우리나라에서는 기존의 아날로그 방송과 고품질 디지털 방송 서비스을 위한 디지털 방송이 시험적으로 실시되고 있는 상황이다. 이러한 환경하에서 디지털 방송 수신만을 위한 수신기는 아직 시기상조이며, 아날로그 방송과 디지털 방송을 동시에 수신할 수 있근 일체형 수신기가 필요하다. 일체형 수신기에서 가장 문제가 되는 부분이 아날로그 방송을 수신하여 디지털 영상으로 인코딩한 후 화면에 뿌려줄때 Even Field와 Odd Field를 분리하여 뿌려주기 때문에 많은 영상의 열화가 발생하게 된다. 이러한 문제를 해결하기 위하여 많은 방법들이 연구되고 있는 실정이다. 본 연구에서 사용된 시스템을 간략하게 소개하면 디지털 방송 수신을 위한 SoC로는 Zoran의 G9 Ellete 채택하였고 아날로그 영상의 Decoder로는 AMI의 ADV7401을 선택하였다. 이에 대한 운영체제는 실시간 운영체제인 Thread-X를 선택하였다.

  • PDF

동궁비 원삼에 사용된 금사의 과학적 분석 (A Scientific Analysis of Gold Threads Used in Donggungbi-Wonsam(Ceremonial Robe Worn by a Crown Princess, National Folklore Cultural Heritage No.48))

  • 이장존;안보연;한기옥;이량미;유지현;유지아
    • 보존과학회지
    • /
    • 제37권5호
    • /
    • pp.525-535
    • /
    • 2021
  • 본 연구는 동궁비 원삼의 직금단과 자수에 사용된 금사를 대상으로 과학적 분석을 통해 재료적 특성을 파악하였다. 동궁비 원삼의 금사 배지는 비목질계 섬유소가 관찰되어 닥나무 섬유의 한지를 사용한 것으로 추정된다. XRF 분석을 통해 동궁비 원삼의 통수스란에는 순금의 편금사, 색동과 한삼에는 편은사로 제직한 직금단임을 알 수 있었다. 특히 편은사에서는 황이 높게 검출되는데 이것은 은을 사용하여 금빛을 내기 위한 훈증의 유황 성분의 영향과 보존환경에 의한 황화은이 형성된 것으로 보인다. 또한 용보의 문양은 연금사와 연은사로 표현하였으며, 용보의 테두리는 순금의 연금사로 장식하였다. 특히 본 연구에서는 금사의 금속면과 배지 사이의 접착제와 혼합물에 대해 GC/MS, XRF, Raman 분석을 실시하였다. 그 결과 단백질계 화합물인 아교와 같은 접착제를 사용하고, 혼합물로는 편금사의 경우 활석을 섞고, 편은사에는 석간주를 혼합하여 사용하였음을 확인할 수 있었다.

타이타늄 임플랜트 시편 내부에 설치한 자석의 자성강도에 따른 골형성 변화 (THE CHANGE OF BONE FORMATION ACCORDING TO MAGNETIC INTENSITY OF MAGNET PLACID INTO TITANIUM IMPLANT SPECIMENS)

  • 황윤태;이성복;최대균;최부병
    • 대한치과보철학회지
    • /
    • 제43권2호
    • /
    • pp.232-247
    • /
    • 2005
  • Purpose. The purposes of this investigation were to discover the possibility of clinical application in the areas of dental implants and bone grafts by investigating the bone formation histologically around specimen which was depending on the intensity of magnetic field of neodymium magnet inside of the specimens. Material and method. 1. Measurement of magnetic intensity - placed the magnet inside of the specimen, and measured the intensity of magnetic field around the 1st thread and 3rd thread of specimen 20 times by using a Gaussmeter(Kanetec Co., Japan). 2. Surgical Procedure - Male rabbit was anesthetised by constant amount of Ketamine (0.25ml/kg) and Rompun (0.25ml/kg). After incising the flat part of tibia, and planted the specimens of titanium implant, control group was stitched without magnet, while experimental groups were placed a magnedisc 500(Aichi Steel Co., Japan) or magnedisc 800(Aichi Steel Co., Japan) into it, fixed by pattern resin and stitched. 3. Management after the surgery - In order to prevent it from the infection of bacteria and for antiinflammation, Gentamycin and Ketopro were injected during 1 week from operation day, and dressed with potadine. 4. Preparation of histomorphometric analysis - At 2, 4 and 8 weeks after the surgery, the animals were sacrificed by excessed Ketamine, and then, specimens were obtained including the operated part and some parts of tibia, and fixed it to 10% of PBS buffer solution. After embedding specimens in Technovit 1200 and B.P solution, made a H-E stain. Samples width was 75$\mu$m . In histological findings through the optical microscope and using Kappa image base program(Olympus Co. Japan), the bone contact ratio and bone area ratio of each parts of specimens were measured and analyzed. 5. Statistical analysis - Statistical analysis was accomplished with Mann Whitney U-test. Results and conclusion. 1. In histomorphometric findings, increased new bone formation was shown in both control & experimental groups through the experiment performed for 2, 4 & 8 weeks. After 4 weeks, more osteoblasts and osteoclasts with significant bone remodeling were shown in experimental groups. 2. In histomorphometric analysis, the bone contact ratios were 38.5% for experimental group 1, 29.5% for experimental group 2 and 11.9% for control group. Experimental groups were higher than control group(p<0.05) (Fig. 6, Table IV). The bone area ratios were 60.9% for experimental group 2, 46.4% for experimental group 1 and 36.0% for control group. There was no significantly statistical difference between experimental groups and control group(p<0.05) (Fig. 8, Table VII) 3. In comparision of the bone contact ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group at the 1st thread (p<0.05) and experimental group 1 (1.8mT) was higher than control group at the 3rd thread(p<0.05) (Fig. 7, Table V, VI). 4. In comparision of the bone area ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group and experimental group 1 (4.0mT) at the 1st thread(p<0.1) and experimental group 2(4.4mT) was higher than experimental group 1 (1.8mT) at the 3rd thread(p<0.1) (Fig. 9, Table IX, X). Experiment group 2 was largest, followed by experiment group l and control group at the 3rd thread of implant. There was a significant difference at the 1st thread of control group & experiment group 2, and at 1st thread & 3rd thread of experiment group 1 & 2, and not at control group experiment group 1.(p<0.1)

비주얼 시뮬레이터를 이용한 KALIMER가상현실 구현 (Simulator development Using Information Visualization Into Virtual Reality Laboratory for KALIMER)

  • Kwan-Seong Jeong;Young-min Kwon;Yong-Bum Lee;Won-Pyo Chang;Do-Hee Hahn
    • 한국전자거래학회지
    • /
    • 제6권2호
    • /
    • pp.13-24
    • /
    • 2001
  • The Real-Time Best-Estimate simulator NPA4K is being developed for providing an efficient nuclear power, KALIMER, simulation environment for transient safety analyses using information visualization. The advanced features of NPA4K simulator are the Once-Through Running Environment, Functionalities of displaying the several X-Y Plot on one system, and Multi-thread Processing, The objective of NPA4K simulator is ta realize the Virtual Reality Environment through Network and Internet technology in Nuclear Power Plants.

  • PDF

다두식 자수기를 활용한 패션소재 개발에 관한 연구 (A Study of a Fashion Subject Matter Development by the Multiheaded Embroidery Machine)

  • 박혜신;양취경
    • 복식
    • /
    • 제54권4호
    • /
    • pp.129-144
    • /
    • 2004
  • The modems who lives complicated society, the silence which the Orient thought asserts leads and to get comfortable. It is becoming, the like this social atmosphere will in the interest regarding a manual example and the Orient material, the use of the embroidery textile goods is increasing specially. The purpose of this article is to suggest a model for development of machine embroidery fabric material and highly value added apparel industries. The multi-headed embroidery machine where the application scope is wide from the dissertation, we are requested' NaNa company'. The multiheaded embroidery machine uses TAJIMA TMFD-G620 and SUNSTAR SWF-/B-WD(X) 620-100 the embroidery textile uses the silk, the cotton and the synthesis fertile goods etc 24 type, the embroidery thread Maraton thread(viscose rayon 100%) with used the cord. The 8 Korean motives are made on 23 fabrics, 6 of which are full-sized manufactured one-pieces and the other 17 of which are produced to home interior goods such as curtains or fashion accessories like handbags as simulations. Among the products, the pattern-4-1 and the pattern-4-2 are contracted with local fashion industry, and the pattern-1-1~3 are dealing with other companies in Japan. The computerized machine-embroidering and simulation producing of fashion items are available to reduce the cost in making samples and transfer the old labor & toil-centered industry into the new technique & knowledge centered one.

컴퓨터 제어 패턴 재봉기를 위한 패턴 데이타 추출 및 생성 알고리즘 (Pattern Data Extraction and Generation Algorithm for A Computer Controlled Pattern Sewing Machine)

  • 윤성용;백상현;김일환
    • 산업기술연구
    • /
    • 제19권
    • /
    • pp.179-187
    • /
    • 1999
  • The computer pattern sewing machine is an automatic sewing machine that is controlled by an input pattern. Even a novice can run this machine for various tasks fast and reliably such as sewing a button, a belt ring and an airbag, etc. The pattern processing software, which is the main software of this machine, is for editing and modifying pattern data by online teaching or off-line editing, setting up parameters, and calculate a moving distance of working area on the x-y axes. In this paper we propose an algorithm to generate pattern data for sewing by simplifying image data. The pattern data are composed of outline data like dot, line, circle, arc, curve, etc. We need converting this data into sewing data which involve sewing parameter, moving distance of working are an the x-y axes, thread, spindle speed.

  • PDF

멀티스레드를 이용한 PO법 시뮬레이터 구현 방안 (Consideration of PO Simulator Implementation using Multi Thread)

  • 김태용;이훈재
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 추계학술대회
    • /
    • pp.63-65
    • /
    • 2011
  • 현재 범용성이 높은 전자계 시뮬레이터가 널리 보급되어 왔으며, 안테나 설계, EMC 설계, 측정, 초고주파 소자 설계 등에 활용되고 있다. 본 연구에서는 X 밴드 영역에서 다양한 전자계 문제 해석을 목적으로 멀티 코어 기반 PC 자원을 보다 효율적으로 활용하고, 나아가 TCP/IP 기반 네트워크 토폴로지 구성을 통한 효율성 높은 전자계 시뮬레이터 구현을 위한 프레임워크 구축과 구현 방안을 제안한다.

  • PDF