• 한국항공운항학회지
• /
• 제25권3호
• /
• pp.74-80
• /
• 2017

As for A rotary wing aircraft, the configuration change about split yaw swaged rod was executed to improve hit treat capability for dealing with a long rod. The purpose of this study was to analyze if or not the quality of the split yaw swaged rod was obtained, and so the flight safety was ensured or not. Buckling analysis, Coupling Thread Strength Analysis, Thermal Stress analysis and Rod Natural Frequency Analysis were executed for structural analysis. The results of the analysis were presented that the split rod had the sufficient margin of safety and so there were no anomalies in the limit load and no failures in the ultimate load. And there were no resonances in result of natural frequency analysis. In conclusion, this study showed that the split yaw swaged rod had structural safety, so flight safety of rotary wing aircraft was secured and there was no problem in aircraft operation. It is certain that the technology of splitting the yaw swage rod will contribute to the operational Safety of the rotary wing aircraft in the future.

• 비파괴검사학회지
• /
• 제25권6호
• /
• pp.439-445
• /
• 2005

The stud bolt is one of crucial parts for safe operation of reactor vessels in nuclear power plants, Crack initiation and propagation were reported in stud bolts that arc used for closure of reactor vessel and head, Stud bolts are inspected by ultrasonic technique during overhaul periodically for the prevention of stud bolt failure which could induce radioactive leakage from nuclear reactor, In conventional ultrasonic testing for inspection of stud bolts, cracks are detected by using shadow effect It takes too much time to inspect stud bolts by using conventional ultrasonic technique. In addition, there were numerous spurious signals reflected from every oblique surfaces of thread, In this study, the signal processing technique for enhancing conventional ultrasonic technique was introduced for inspecting stud bolts. The signal processing technique provides removing spurious signal reflected from every oblique surfaces of thread and enhances detectability of defects. Detectability for small crack was enhanced by using this signal processing in ultrasonic inspection of stud bolts in Nuclear Power Plants.

• 한국인터넷방송통신학회논문지
• /
• 제16권1호
• /
• pp.69-75
• /
• 2016

대화형 웹 환경에서 응용 프로그램의 성능은 고품질의 서비스를 제공하기 위한 필수적인 이슈이다. 즉, 웹 요청 트랙픽이 일시적으로 급증할 경우, 서버의 CPU 여유 시간이 부족하게 되고 결국 요청의 응답 시간이 증가하기 때문에 클라이언트에게 좋지 않은 경험을 유발하게 된다. 본 논문에서는 J2EE 응용 서버에서 설정 가능한 파라미터인 스레드 풀과 데이터베이스 연결 풀의 크기가 응용 프로그램의 성능에 끼치는 영향을 분석한다. 또한 최적의 파라미터 값을 얻기 위해서 웹 성능 분석을 위한 실험적 평가 기법을 소개한다. 마지막으로 사례 연구를 통해 성능 분석 결과를 제시한다.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.53-60
• /
• 2018

고생산성 스마트공장을 실현하고 섬유 공정간 소량 및 대량 생산 요구에 대응할 수 있는 공장간 협업 기능성을 위해서 ICT개념이 도입되고 있다. ICT 기반의 협업 생산과 제조공정 최적화를 통해 제품 개발기간과 원가, 품질, 납기를 개선하여 고생산성 섬유제품을 생산 할 수 있는 ICT 융합형 모니터링 시스템이 필요하다. 본 논문에서는 봉제기 밑실 부분에 실제 장착 가능한 비접촉식 디지털 광 화이버 센서를 이용하여 밑실잔량을 센싱하여 IoT기반 라떼판다 보드 디스플레이에 표출하는 시스템 설계를 제안하고 구현 하였다. 이는 기존 밑실잔량 센싱 장치에 비해 소형화 되어 봉제기에 적용 우수한 성능을 확보할 수 있다.

• Journal of Acupuncture Research
• /
• 제38권4호
• /
• pp.320-324
• /
• 2021

Lumbar spinal stenosis (LSS) is a common degenerative spinal condition that can have unpredictable improvement and worsening of symptoms which include low back pain, radiating pain, claudication, and degenerative lumbar scoliosis affecting quality of life. In this study, thread embedding acupuncture (TEA) was used as a conservative treatment for LSS in combination with complex Korean medicine treatments (acupuncture, herbal medicines, and physical therapy). The treatment was evaluated using the numerical rating scale, walking distance and duration, and inclination of radiological lumbar scoliosis according to antalgic posture. TEA was performed 27 times between June 8, 2020, and March 16, 2021. The patient showed improvement in numerical rating scale score from 7 to 2, pain-free walking distance from 10 m to 900 m, and scoliosis inclination following treatment. The findings of this study suggest that TEA may be helpful in the treatment of LSS.

• 한국안전학회지
• /
• 제35권3호
• /
• pp.43-48
• /
• 2020

It is considered that most of reusable pipe supports, which are used as formwork support posting at construction sites, do not meet the performance standard. Due to the use of reusable pipe supports that do not meet such performance standard the potential risk of collapse accident is increasing. Therefore, this study identifies the status of compliance with performance standard, and presents the requirements for improving quality control to prevent the collapse of pipe supports reused at the construction site. First, if the female thread of the product with no clearance and new support pin with the diameter of 12mm are replaced at the same time for use, it is considered that the performance will be improved. Second, as the quality performance during use can be improved in the case of larger thickness of inner diameter compared to the case of larger thickness of outer diameter, it is necessary to increase the inner pipe thickness greatly than the current thickness. Based on the results of this study, it is expected that the performance the reusable pipe support (V4) can be improved, if the diameter of the support pin is 12mm, the female thread has a small clearance, and the inner tube thickness is 2.3 ~ 2.7mm. In addition, it is considered that other performance improvement factors included in the study results could be used as important data for improving the performance of reusable pipe support.

• 한국화재소방학회논문지
• /
• 제29권3호
• /
• pp.21-30
• /
• 2015

본 연구는 스프링클러설비용 CPVC관과 신축배관 접속부분에서의 누수저감을 위하여 신축배관을 연결하기 위한 밸브소켓과 신축배관 너트부분에 삽입되는 수밀 고무패킹 재질에 대한 국내 및 국외 관련 규격의 검토와 관련 시험 등을 통해 대책을 제안하고자 한다. 누수시험을 통해 밸브소켓 재질은 신축배관 너트부분이 금속제인 경우 금속제로 사용하거나 신축배관 너트부분의 재질을 합성수지제로 사용하여야함을 알 수 있었다. 또한 밸브소켓의 적정 품질 확보를 위해서는 나사산 규격과 검사기준으로 KS B 0221(관용평행나사)와 나사산 검사규격을 KS B 5223(관용 평행나사 게이지)에 따르도록 관련 기준을 개정할 필요가 있다. 그리고 신축배관 너트부분에 설치되는 수밀용 고무링 소재에 대해 세부적인 기준이 없어 NBR과 EPDM 소재가 함께 사용되고 있으나 수밀성이 우수한 EPDM 소재가 사용되도록 관련 기준을 개정할 필요가 있다.

• 구강회복응용과학지
• /
• 제21권2호
• /
• pp.169-182
• /
• 2005

The purpose of this study was to compare the stress distribution around the surrounding bone according to the splinted and non-splinted conditions on the finite element models of the two implant crowns with the different vertical bone level. The finite element model was designed with the parallel placement of the two fixtures ($4.0mm{\times}11.5mm$) with reverse buttress thread on the mandibular 1st and 2nd molars. As the bone quality, the inner cancellous bone and the outer 2 mm cortical bone were designed, and the cortical and cancellous bone were assumed to be perfectly bonded to the implant fixture. The splinted model(Model 1) had 2 mm contact surface and the non-splinted model(Model 2) had $8{\mu}m$ gap between two implant crowns. Two group (Splinted and non-splinted) was loaded with 200 N magnitude in the vertical and oblique directions on the loading point position on the central position of the crown, the 2 mm and 4 mm buccal offset point from the central position. Von Mises stress value was recorded and compared in the fixture-bone interface in the bucco-lingual and mesio-distal sections. The results were as follows; 1. In the vertical loading condition of central position, the stress was distributed on the cortical bone and the cancellous bone around the thread of the fixture in the splinted and non-splinted models. In the oblique loading condition, the stress was concentrated toward the cortical bone of the fixture neck, and the neck portion of 2nd molar in the non-splinted model was concentrated higher than that of 1st molar compared to the splinted model. 2. In the 2 mm buccal offset position of the vertical loading compared to the central vertical loading, stress pattern was shifted from apical third portion of the fixture to upper third portion of that. In the oblique loading condition, the stress was distributed over the fixture-bone interface. 3. In the 4 mm buccal offset position of the vertical loading, stress pattern was concentrated on the cortical bone around the buccal side of the fixture thread and shifted from apical third portion of the fixture to upper third portion of that in the splinted and non-splinted models. In the oblique loading, stresses pattern was distributed to the outer position of the neck portion of the fixture thread on the mesio-distal section in the splinted and non-splinted models. Above the results, it was concluded that the direction of loading condition was a key factor to effect the pattern and magnitude of stress over the surrounding bone of the fixture under the vertical and oblique loading conditions, although the type with or without proximal contact did not effect to the stress distribution.

• 한국컴퓨터그래픽스학회논문지
• /
• 제16권3호
• /
• pp.1-10
• /
• 2010

본 논문에서는 BRDF를 이용한 재질 렌더링에서 적은 수의 샘플을 사용하면서 화소(pixel) 노이즈가 없는 렌더링 방법을 제안한다. BRDF를 이용한 재질 렌더링에서 이미지 품질을 결정하는데 가장 중요한 요소 중 한가지는 모든 방향으로부터 들어오는 빛의 양을 어떻게 적분할 것인가 이다. 일반적으로 이러한 적분에는 빛의 양을 샘플값들의 합으로 근사시키는 Monte Carlo 기법이 널리 사용된다. 이 방법은 샘플링 수를 늘릴수록 실제 물체의 재질에 가깝게 렌더링이 가능하지만 많은 렌더링 연산이 필요하고, 반대로 샘플링 수를 줄이면 심각한 화소 노이즈가 발생한다. 적은 수의 샘플을 사용하면서도 화소 노이즈가 없는 렌더링을 하기 위해서, 본 논문에서는 BRDF데이터에서 렌더링 결과에 미치는 영향을 고려하여 중요한 부분을 더욱 많이 샘플링 하는 중요 샘플링 기법을 응용하며, 시점 방향에 따른 샘플들을 위치 변화를 최소화한 후, 이 인접한 시점 방향의 샘플들을 엮어서 만든 샘플 쓰레드를 제안한다. 이 샘플 쓰레드는 반사광에 따라 변화하는 샘플들의 자취를 연결한 데이터로, 이는 시점 방향에 따라 연속적으로 변하는 샘플 집합을 갖는다. 따라서 샘플 기반의 렌더링이 기본적으로 가지고 있는 화소 노이즈 현상이 발생하지 않는다. 따라서 적은 수의 샘플 쓰레드로도 노이즈가 없는 만족할만한 렌더링 결과를 얻을 수 있으며, 샘플 쓰레드를 BRDF에 따라 미리 계산해 놓을 수 있어 그래픽 하드웨어를 통한 실시간 BRDF 렌더링이 가능하다.

• Journal of Acupuncture Research
• /
• 제38권4호
• /
• pp.312-319
• /
• 2021

Background: Lumbar herniated intervertebral disc (LHIVD) is a frequently presented condition/disease in Korean medical institutions. In this study, the economics of thread embedding acupuncture (TEA) was evaluated in a randomized controlled trial comparing TEA with sham TEA (STEA). Methods: This economic evaluation was analyzed from a limited social perspective, and the per-protocol set was from a basic analysis perspective. The cost-effectiveness analysis was based on the change in visual analog scale score, and the cost-utility analysis was based on the quality-adjusted life years. The final results were expressed as the average cost-effectiveness ratio and incremental cost-effectiveness ratio, and furthermore sensitivity analysis was performed to confirm the robustness of the results observed. Results: The cost-effectiveness analysis showed that TEA was 9,908 won lower than STEA, while the decrease in 100 mm visual analog scale score was 8.5 mm greater in the TEA group compared with the STEA group (p > 0.05). The cost-utility analysis showed that TEA was 9,908 won lower than STEA, while the quality-adjusted life years of TEA was 0.0026 years higher than STEA (p > 0.05). These results were robust in the sensitivity analysis, but were not statistically significant. Conclusion: In treating LHIVD, TEA appeared to have cost-effectiveness and cost-utility compared with STEA. However, there were no significant differences between the groups in terms of cost, effectiveness, and utility indicators. Therefore, results must be interpreted prudently; this study was the 1^st to conduct an economic evaluation of TEA for LHIVD.