• Structural Engineering and Mechanics
• /
• 제44권3호
• /
• pp.267-288
• /
• 2012

Free vibration analysis of arbitrary quadrilateral thick plates with internal columns and elastic edge supports is presented by using the powerful pb-2 Ritz method and Reddy's third order shear deformation plate theory. The computing domain of arbitrary quadrilateral planform is mapped onto a standard square form by coordinate transformation. The versatile pb-2 Ritz functions defined by the product of a two-dimensional polynomial and a basic function are taken to be the admissible functions. Substituting these displacement functions into the energy functional and minimizing the total energy by differentiation, leads to a typical eigenvalue problem, which is solved by a standard eigenvalue solver. Stiffness and mass matrices are numerically integrated over the plate by using Gaussian quadrature. The accuracy and efficiency of the proposed method are demonstrated through several numerical examples by comparison and convergency studies. A lot of numerical results for reasonable natural frequency parameters of quadrilateral plates with different combinations of elastic boundary conditions and column supports at any locations are presented, which can be used as a benchmark for future studies in this area.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.159-162
• /
• 2000

Novel simulated floating inductor (SFI) using fully-differential operational transconductance amplifier (FOTA) is presented. The SFI only consists of two FOTA and a capacitor. A ladder-type third-order elliptic low-pass filter is also presented for the SFI’s application. The theory of operations described and the simulation results are used to verify theoretical predictions. The SFI shows close agreement between predicted behavior and simulation performance. The simulation results that the SFI have The temperature coefficient of-179 ppm/$^{\circ}C$ and Q factor of 120 at 200kHz at supply voltage ${\pm}$5 V.

• 한국광학회지
• /
• 제10권4호
• /
• pp.294-300
• /
• 1999

본 논문에서는 반도체 광증폭기내에서 four-wave mixing을 발생시키는 spectral hole burning을 더욱 정확하게 해석하기 위하여 밀도행렬을 기존의 방법에 비하여 정확하게 푸는 방법에 대하여 설명하고 이러한 밀도행렬에 대한 수치해석을 실시하여 그 해를 구한다. 이렇게 구한 결과를 통해 반도체 광증폭기내에서의 four-wave mixing에 의한 파장변환을 설명하는 결합 파동 방정식을 유도하고 이것의 해를 구하여 반도체 광증촉기에서의 파장변환이 어떻게 발생하는 지를 설명하고 3차 섭동을 이용하여 계산된 기존의 결과와 비교한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1289-1291
• /
• 1996

In this paper, we propose a new adaptive pre-processing technique for the linearization of a weakly nonlinear system which can be modeled by a Volterra series up to third order. To compensate the nonlinear effects of a given system, an update algorithm for the linear filter coefficients of the proposed adaptive pre-processor is introduced, and to compensate the linear distortion of the given system, the linear inverse filter is also utilized. For the performance test of the proposed adaptive pre-processor, computer simulation results obtained by analyzing an ANRSS loudspeaker model are provided.

• Computers and Concrete
• /
• 제27권3호
• /
• pp.269-282
• /
• 2021

A dynamic analytical solution for a simply supported, rectangular functionally graded plate with a porous middle layer under time-dependent load based on a refined third-order shear deformation theory with a cubic variation of in-plane displacements according to the thickness and linear/quadratic transverse displacement is presented. The solution achieved in the trigonometric series form and rests on the Green's function method. Two porosity types and their influence on material properties, and mechanical behavior are considered. The network of pores is assumed to be empty or filled with low-pressure air, and the material properties are calculated using the power-law distribution idealization. Numerical calculations have been carried out to demonstrate the accuracy of the kinematic model for the dynamic problem, the effect of porosity, thickness of porous layers, power-law index, and type of loading on the dynamic response of an imperfect functionally graded material plate.

• Steel and Composite Structures
• /
• 제43권6호
• /
• pp.725-734
• /
• 2022

In this paper, buckling analyses of nanocomposite plate reinforced by Graphen platelet (GPL) is studied. The Halphin-Tsai model is used for obtaining the effective material properties of nanocomposite plate. The nanocomposite plate is modeled by Third order shear deformation theory (TSDT). The elastic medium is simulated by Winkler model. Employing relations of strains-displacements and stress-strain, the energy equations of the plate are obtained and using Hamilton's principle, the governing equations are derived. The governing equations are solved based on analytical solution. The effect of GPL volume percent, geometrical parameters of plate and elastic foundation on the buckling load are investigated. Results show that with increasing GPLs volume percent, the buckling load increases. In addition, elastic medium can enhance the values of buckling load significantly.

• Geomechanics and Engineering
• /
• 제29권6호
• /
• pp.667-681
• /
• 2022

This paper presents a thermoelastic analysis of variable thickness plates made of functionally graded materials (FGM) subjected to mechanical and thermal loads. The thermal load is applied to the plate as a temperature difference between the top and bottom surfaces. Temperature distribution in the plate is obtained using the steady-state heat equation. Except for Poisson's ratio, all mechanical properties of the plate are assumed to vary linearly along the thickness direction based on the volume fractions of ceramic and metal. The plate is resting on an elastic foundation modeled based on the Winkler foundation model. The governing equations are derived based on the third-order shear deformation theory (TSDT) and are solved numerically for various boundary conditions using the differential quadrature method (DQM). The effects of various parameters on the stress distribution and deflection of the plate are investigated such as the value of thermal and mechanical loads, volume fractions of ceramic and metal, and the stiffness coefficients of the foundation.

• 충청수학회지
• /
• 제23권4호
• /
• pp.845-852
• /
• 2010

A nonlinear algebraic equation f(x) = 0 is considered to find a root with integer multiplicity $m{\geq}1$. A variant of Newton-secant method for a multiple root is proposed below: for n = 0, 1, $2{\cdots}$ $$x_{n+1}=x_n-\frac{f(x_n)^2}{f^{\prime}(x_n)\{f(x_n)-{\lambda}f(x_n-\frac{f(x_n)}{f^{\prime}(x_n)})\}$$, $$\lambda=\{_{1,\;if\;m=1.}^{(\frac{m}{m-1})^{m-1},\;if\;m{\geq}2$$ It is shown that the method has third-order convergence and its asymptotic error constant is expressed in terms of m. Numerical examples successfully verified the proposed scheme with high-precision Mathematica programming.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.245-250
• /
• 1998

This thesis is concerned with the development of useful engineering techniques to detect and analyze nonlinearities in mechanical systems. The methods developed are based on the concepts of higher order spectra, in particular the bispectrum and trispectrum, and the Volterra series. The study of higher order statistics has been dominated by work on the bispectrum. The bispectrum can be viewed as a decomposition of the third moment(skewness) of a signal over frequency and as such is blind to symmetric nonlinearities.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1991년도 제6회 파동 및 레이저 학술발표회 Prodeedings of 6th Conference on Waves and Lasers
• /
• pp.81-87
• /
• 1991

A design of a four-mirror optical system for submicron lithography using KrF excimer laser beam(λ=248nm) is presented. By using the third order aberration theory, analytic solutions for a telecentric, flat-field, and anastigmatic four-spherical-mirror system (reduction magnification 5$\times$) are found. Aspherization is carried out to the spherical mirror surfaces in order to reduce the residual higher order aberrations and vignetting effect. Finally we obtain a reflection system useful in submicron lithographic application.