• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1311-1320
• /
• 2000

In this study, shape memory alloy(SMA) wires and piezoceramic actuators(PZT's) are employed in order to generate higher modes on the beam deformations. Compressive force is generated and applied to the beam by the pre-strained SMA wires attached at both ends of the beam. PZT's apply concentrated moments to several locations on the beam. Combinations of the compressive force and concentrated moments are investigated in order to understand the higher-mode deformation of beams. The first desired mode shape is obtained by controlling the temperature of the SMA wires. The first and third mode shapes are performed experimentally by heating SMA wires up to phase transformation temperature. The adaptive wing is defined as a wing whose shape parameters such as the camber, wing twist and thickness can be varied in order to change the wing shape for various flight conditions. In this research, control of the camber has been studied. The wing model consists of three plates and many ribs. Two of the plates are placed parallel to each other and they are clamped at one edge. Third plate connects the other edges of the parallel plates together. Each rib is made of SMA wire and connected to the parallel plates. It generates concentrated force and applies to the plates in oblique directions. The PZT's are bonded onto the plates and exert concentrated moments upon the plate at several locations. The object of this research is to generate various shape of wing by combining the concentrated forces and moments.

• The Korean Journal of Community Living Science
• /
• v.14 no.2
• /
• pp.3-13
• /
• 2003

This paper studied the present condition of social welfare activities of Living Condition Improving Committee of Kimpo City in order to activate the social welfare services of women agricultural organizations. The main results are as follows; First, the general characteristics of the respondents in this study are forty or fifty years of age with above high school education with main income source of agriculture and middle class women living in agricultural communities more than 10 years. Second, considering the present and future planned activities of the Living Condition Improving Committee of Kimpo City this study finds that there is high expectation of helping poor people and joining voluntary services. Third, the members of the Living Condition Improving Committee of Kimpo City have actively participated in the local welfare service programs however, there is significant difference among people according to the age, living standard and joining period. Fourth, out of social welfare activities managed by the Living Condition Improving Committee of Kimpo City the welfare service activities for old people and local community are most active and the participants in the welfare service activities for women and the youngsters are small. Thus, according to this study the Living Condition Improving Committee of Kimpo City should consider the following three points in order to activate the social welfare service activities; First, as the members are expecting to expand the individual activities and to enhance the private improvement, the social welfare service activities should meet with the demands to improve self satisfaction of the participants. Second, new programs should be developed after reviewing the current programs in order to meet with the need of the members. Third, as the committee has not established a network system with government administrative organizations and relating institutions, and as its activities are concentrated in particular areas the committee should establish a new system to provide more efficient services in line with the cooperation with public organization and welfare resource suppliers.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.34-42
• /
• 2005

This paper presents the optimum initial design containing the first and third order properties of the three-group zoom system using lens modules, and the real lens design of the system. The optimum initial design with focal length range of 4.3 mm to 8.6 mm is derived by assigning appropriate first and third order quantities to each module along with the specific constraints required for the system. An initial real lens selected for each group has been designed to match its focal length and the first orders into those of the each lens modules, and then combined to establish an actual zoom system by adjusting the air space between the groups at all zoom positions. The combination of the separately designed groups results in a system which satisfies the first order properties of the zoom system composed of the original lens modules. As a result, by residual aberration correction, we could obtain a zoom system useful in compact digital zoom cameras and mobile phone cameras employing the rear focus method.

• Structural Engineering and Mechanics
• /
• v.76 no.3
• /
• pp.293-310
• /
• 2020

This study derives the differential equations of free vertical bending and torsional vibrations for two- and three-pylon suspension bridges using d'Alembert's principle. The respective algorithms for natural vibration frequency and vibration mode are established through the separation of variables. In the case of the three-pylon suspension bridge, the effect of the along-bridge bending vibration of the middle pylon on the vertical bending vibration of the entire bridge is considered. The impact of torsional vibration of the middle pylon about the vertical axis on the torsional vibration of the entire bridge is also analyzed in detail. The feasibility of the proposed method is verified by two engineering examples. A comparative analysis of the results obtained via the proposed and more intricate finite element methods confirmed the former feasibility. Finally, the middle pylon stiffness effect on the vibration frequency of the three-pylon suspension bridge is discussed. It is found that the vibration frequencies of the first- and third-order vertical bending and torsional modes both increase with the middle pylon stiffness. However, the increase amplitudes of third-order bending and torsional modes are relatively small with the middle pylon stiffness increase. Moreover, the second-order bending and torsional frequencies do not change with the middle pylon stiffness.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.15 no.4
• /
• pp.291-306
• /
• 2011

We consider the second order Strang splitting method to approximate the solution to the KdV equation. The model equation is split into three sets of initial value problems containing convection and dispersal terms separately. TVD MUSCL or MUSCL scheme is applied to approximate the convection term and the second order centered difference method to approximate the dispersal term. In time stepping, explicit third order Runge-Kutta method is used to the equation containing convection term and implicit Crank-Nicolson method to the equation containing dispersal term to reduce the CFL restriction. Several numerical examples of weakly and strongly dispersive problems, which produce solitons or dispersive shock waves, or may show instabilities of the solution, are presented.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.61-65
• /
• 2015

In this paper, a novel filtering power divider with external isolation resistors is presented. The proposed power divider can be considered as an integration of a bandpass filter and a Gysel power divider. Based on the circuit topology, a high-order filtering power divider can be easily realized. Odd- and even-mode models are employed to analyze the filtering and power splitting functions. For demonstration, a third-order filtering power divider operating at 1.5 GHz is designed and implemented. The measured results exhibit an isolation between the output ports that is better than 20 dB at around the center frequency.

• Culinary science and hospitality research
• /
• v.12 no.1 s.28
• /
• pp.203-215
• /
• 2006

This study tried to develop an estimation model on the competitive power as a method to understand a practical index on the competitive power in order to improve the competitiveness of domestic bakery corporations and look into their internal structure. The results of the practical analysis are summarized below. First, eight critical success factors, which are considered important in competitive power in bakery corporations, were derived from preceding studies and an expert meeting. Second, this study performed a questionnaire with eight derived factors for bakery managers and employees. Seven critical success factors suitable for bakery corporations were chosen through validity and reliability tests. Third, this study performed an AHP(Analytic Hierarchy Process) analysis in order to establish preference according to each factor and weight. The importance of factor concerned with the competitive power of bakery corporations according to the result of weight analysis appeared in order of customer resources, personnel resources, corporate images, material resources and qualities, technical capability, financial factors and pliability(time).

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.3
• /
• pp.293-300
• /
• 2007

The aim of this paper is to design a speed controller of a DC motor by selection of a PID parameters using genetic algorithm. The model of a DC motor is considered as a typical non-oscillatory, second-order system, And this paper compares three kinds of tuning methods of parameter for PID controller. One is the controller design by the genetic algorithm. second is the controller design by the model matching method third is the controller design by Ziegler and Nichols method. It was found that the proposed PID parameters adjustment by the genetic algorithm is better than the Ziegler & Nickels' method. And also found that the results of the method by the genetic algorithm is nearly same as the model matching method which is analytical method. The proposed method could be applied to the higher order system which is not easy to use the model matching method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.22-27
• /
• 2006

This paper describes the development of the stream-tube based dispersion model for modeling contaminant transport in open channels. The operator-splitting technique is employed to separate the 2D contaminant transport equation into the pure advection and pure dispersion equations. Then the total variation diminishing (TVD) schemes are combined with the second-order Lax-Wendroff and third-order QUICKEST explicit finite difference schemes respectively to solve the pure advection equation in order to prevent the occurrence of numerical oscillations. Due to various limiters owning different features, the numerical tests for 1D pure advection and 2D dispersion are conducted to evaluate the performance of different TVD schemes firstly, then the TVD schemes are applied to experimental data for simulating the 2D mixing in a straight trapezoidal channel to test the model capability. Both the numerical tests and model application show that the TVD schemes are very competent for solving the advection-dominated transport problems.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.629-631
• /
• 2007

In hands-free full-duplex communication systems, acoustic signals picked up by the microphones can be mixed with echo signals as well as noises, which may result in poor performance of the corresponding communication system. Also, the system performance may decrease further if the reverberation occurs since it is harder to estimate the impulse response of the demixing system. For blind source separation (BSS) in such cases, a time-frequency masking approach can be employed to separate undesired echo signals and noises, but, permutation ambiguities also should be solved for the echo cancellation. In this paper, we propose a new acoustic echo cancellation (AEC) approach utilizing the time-frequency masking and higher-order statistics, whereby a desired signal selection, based on coherence and third-order statistics (i.e., kurtosis), is introduced along with output signal normalization. Simulation results demonstrate that the proposed approach yields better echo and noise cancellation performances than the conventional AEC approaches.