• Journal of Korean Institute of Industrial Engineers
• /
• v.17 no.2
• /
• pp.27-37
• /
• 1991

A recognition algorithm for Hangul is developed by structural analysis to Hangul in this theses. Four major procedures are proposed : preprocessing, type classification, separation of consonant and vowel, recognition. In the preprocessing procedure, the thinning algorithm proposed by CHEN & HSU is applied. In the type classification procedure, thinned Hangul image is classified into one of six formal types. In the separation of consonant and vowel procedure, starting from branch-points which are existed in a vowel, character elements are separated by means of tracing branch-point pixel by pixel and comparison with proposed templates. In the same time, the vowels are recognized. In the recognition procedure, consonants are extracted from the separated Hangul character and recognized by modified Crossing method. Recognized characters are converted into KS-5601-1989 codes. The experiments show that correct recognition rate is about 80%-90% and recognition speed is about 2-3 character persecond in three types of different input data on computer with 80386 microprocessor.

• Journal of the Korean association of regional geographers
• /
• v.19 no.4
• /
• pp.737-746
• /
• 2013

This study was carried out to suggest plan of earth surface erosion by typifying landforms in Gwangeung Forest. Elements of landform were classifyed as hierachical system by scale. Scale for classification set a decision as four categories. We could classify landforms which level zero is 4 levels of elements, level one is 6, level two is twelve, level three is twenty seven. However, micro landforms of valley bottom which is hard to mapping made a categorization as upper valley, middle valley, artificial channel valley. Plan for soil erosion suggested yarding corridor, landform management for surroundings of slope and bridge using rock and gravel, road construction for forest management stable bedrock rather than soil layer, repose angles and piling up rocks for channel walls, and setting up buffer zone when forest thinning be carried out. The result of this research will be expected to provide information for forest management of mountainous areas by landform types.

• Honam Mathematical Journal
• /
• v.36 no.3
• /
• pp.695-706
• /
• 2014

Various properties of digital covering spaces have been substantially used in studying digital homotopic properties of digital images. In particular, these are so related to the study of a digital fundamental group, a classification of digital images, an automorphism group of a digital covering space and so forth. The goal of the present paper, as a survey article, to speak out utility of digital covering theory. Besides, the present paper recalls that the papers [1, 4, 30] took their own approaches into the study of a digital fundamental group. For instance, they consider the digital fundamental group of the special digital image (X, 4), where X := $SC^{2,8}_4$ which is a simple closed 4-curve with eight elements in $Z^2$, as a group which is isomorphic to an infinite cyclic group such as (Z, +). In spite of this approach, they could not propose any digital topological tools to get the result. Namely, the papers [4, 30] consider a simple closed 4 or 8-curve to be a kind of simple closed curve from the viewpoint of a Hausdorff topological structure, i.e. a continuous analogue induced by an algebraic topological approach. However, in digital topology we need to develop a digital topological tool to calculate a digital fundamental group of a given digital space. Finally, the paper [9] firstly developed the notion of a digital covering space and further, the advanced and simplified version was proposed in [21]. Thus the present paper refers the history and the process of calculating a digital fundamental group by using various tools and some utilities of digital covering spaces. Furthermore, we deal with some parts of the preprint [11] which were not published in a journal (see Theorems 4.3 and 4.4). Finally, the paper suggests an efficient process of the calculation of digital fundamental groups of digital images.

• Corrosion Science and Technology
• /
• v.12 no.6
• /
• pp.274-279
• /
• 2013

Flow accelerated corrosion (FAC) of the carbon steel piping in nuclear power plants (NPPs) has been major issue in nuclear industry. During the FAC, a protective oxide layer on carbon steel dissolves into flowing water leading to a thinning of the oxide layer and accelerating corrosion of base material. As a result, severe failures may occur in the piping and equipment of NPPs. Effect of alloying elements on FAC of pipe materials was studied with rotating cylinder FAC test facility at $150^{\circ}C$ and at flow velocity of 4m/s. The facility is equipped with on line monitoring of pH, conductivity, dissolved oxygen(DO) and temperature. Test solution was the demineralized water, and DO concentration was less than 1 ppb. Surface appearance of A 106 Gr. B which is used widely in secondary pipe in NPPs showed orange peel appearance, typical appearance of FAC. The materials with Cr content higher than 0.17wt.% showed pit. The pit is thought to early degradation mode of FAC. The corrosion product within the pit was enriched with Cr, Mo, Cu, Ni and S. But S was not detected in SA336 F22V with 2.25wt.% Cr. The enrichment of Cr and Mo seemed to be related with low, solubility of Cr and Mo compared to Fe. Measured FAC rate was compared with Ducreaux's relationship and showed slightly lower FAC rate than Ducreaux's relationship.

• Tribology and Lubricants
• /
• v.33 no.3
• /
• pp.119-125
• /
• 2017

In this study, we perform a numerical analysis to predict the film thickness and lubrication regions for a thrust ball bearing under different operating conditions. Film thinning and replenishment affect the film thickness in starved lubrication. As the inlet meniscus position is brought to the edge of the Hertz contact, the thin film thickness is calculated as starved equation. We use a film replenishment model to determine the recovery film thickness between rolling elements. We use a hydrodynamic model to describe film recovery, that results from the effects of surface tension. In this model, we consider the surface tension gradient in fluid depression as the driving force for fluid recovery. We use Fourier transform method to determine the time-dependent depth of depressed oil. We calculate the change in the central film thickness graphically by using the recovery equation in starved elastohydrodynamic lubrication(EHL) under operating conditions that include numbers of balls, sliding velocity, applied force, and ambient film thickness. We evaluate the degree of starvation by using the distance from the center of the contact area to the meniscus position. Parched lubrication, a phenomenon where the film thickness decreases consistently, occurs at the severe condition. We determine optimal values with respect to the numbers of balls, and sliding velocity. The investigation can contribute to the design operating conditions for proper lubrication.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.185-196
• /
• 1999

In this dissertation, a new off-line recognition system is proposed using a subgraph pattern, neural network. After thinning is applied to input characters, balance having a noise elimination function on location is performed. Then as the first step for recognition procedure, circular elements are extracted and recognized. From the subblock HT, space feature points such as endpoint, flex point, bridge point are extracted and a subgraph pattern is formed observing the relations among them. A region where vowel can exist is allocated and a candidate point of the vowel is extracted. Then, using the subgraph pattern dictionary, a vowel is recognized. A same method is applied to extract horizontal vowels and the vowel is recognized through a simple structural analysis. For verification of recognition subgraph in this paper, experiments are done with the most frequently used Myngjo font, Gothic font for printed characters and handwritten characters. In case of Gothic font, character recognition rate was 98.9%. For Myngjo font characters, the recognition rate was 98.2%. For handwritten characters, the recognition rate was 92.5%. The total recognition rate was 94.8% with mixed handwriting and printing characters for multi-font recognition.

• The Journal of the Petrological Society of Korea
• /
• v.26 no.1
• /
• pp.13-43
• /
• 2017

In the Hapcheon area, hypersthene-bearing monzonite (mangerite) and syenite are recognized. The main minerals of syenite are alkali feldspar, plagioclase, amphibole, biotite, and quartz. Anhedral hornblende and biotite are interstitial between feldspar and quartz, indicating that the hydrous minerals were crystallized later on. Based on petrochemical studies of major elements, syenite is alkaline series, metaluminous, and I-type. The variation patterns in the trace and rare earth elements of mangerite and syenite show the features of subduction-related igneous rock such as depletion of HFSE, relative enrichment in LILE to LREE, and negative Nb-P-Ti anomalies. Based on the experimental data and petrographic characteristics of the syenite, Hapcheon syenitic magma is considered to be formed by partial melting in a dry system. SHRIMP U-Pb zircon data yield the Triassic age as $227.4{\pm}1.4Ma$ in mangerite, $215.3{\pm}1.2Ma$ in syenite, and $217.9{\pm}2.6Ma$ in coarse-grained syenite, respectively. The mangerite age is similar to those of post-collisional plutonic rocks in Hongseong (226~233 Ma), Yangpyeong (227~231 Ma), and Odaesan (231~234 Ma) areas in the Gyeonggi Massif. Syenites were intruded after about 10 Ma. The features seen in the mangereite and syenite rocks can be explained by models such as the continental collision and slab break-off and the lithosphere thinning and asthenosphere upwelling model.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.4
• /
• pp.18-27
• /
• 2012

This paper proposes a management method for a coastal black pine forest landscape considering the parallax effect. For the study, 10 coastal black pine forests in Gangneung were investigated about the average width of the coastal forests, the average diameters, and the intervals of the pines. Categorizations were realized for the 3 types of scene(sea, field, mountain, residential area, commercial area), diameter(16cm, 22cm, 28cm) and interval(5m, 7m, 10m) to produce a total of 45 scenic simulations. An investigation was made on the scenic preferences using 45 simulation images with S.D, and Likert Scales. The results were as follows: According the comparison of scenic preferences, natural landscapes(sea, field, and mountain) ranked high among preferences, with fabricated landscapes(residential area, commercial area) ranked low. The highest scenic preferences were shown with the seascape and an interval of 7m between the trees. On the contrary, the interrelationship was very low between the visual quantity of the scenic's elements(green, sky, building, road etc.) and the scenic preferences. As the results of the factor analysis, the 3 sense factors of "Depth(78.0%)" "Diversity(l5.6%)" and "Spatiality(6.4%)" explained coastal scenic preferences. "Spatiality" showed significant differences at intervals of 5~7m, and 10m between trees. This shows coastal forest management based on the interval of 10m standard affecting scenic preference.

• Journal of Korean Society of Forest Science
• /
• v.87 no.2
• /
• pp.121-130
• /
• 1998

This study was carried out to investigate working time, productivity, and heart rate during thinning using chain saw in Japanese larch(Larix leptolepis) plantation site for analysis of physical work load, and to investigate maximal oxygen uptake of worker for analysis of maximal work capacity. The real working time was 366 minutes in a day ; about 192 minutes in the a.m., 174 minutes in the p.m.. The ratio of real working time per total working time was approximately 90%. The rate of moving(Mo) to real working times was 26.3, which was the largest one of work elements. Average maximal oxygen uptake, as an asset of personnel performance, was $2.42{\ell}/min$($46.5m{\ell}/kg/min$). During the real working time, average productivity, the mean rate of increase of heart rate, and the mean work load index was $2.62m^3/hr$, 93.2%, and 41.9%, respectively.

• Journal of Korean Society of Forest Science
• /
• v.97 no.3
• /
• pp.274-284
• /
• 2008

For forest valuation, various input data were generally required: for example, slope, timber stocks, logging costs, hauling costs, market values of timber, afforestation costs, thinning costs, and so on. To enhance the efficiency of forest valuation process, it would be helpful to guide how and where to acquire such data sets. Moreover, to make an appraisal of timber assets through the Forestry Household Economy Survey, it would be inevitable to use standardized input data by region or tree species. Therefore, this research intended to develop a methodology of standardizing each input data, and to present its available data sources. Also, a guidance was presented to explain how to control input data within the appraisal process. Then, the appraisal process were analyzed and summarized in four types of information such as system flowchart, process flowcharts, detail flowcharts, and skimmer data, which are essential elements in developing an appraisal software, named EnVAST (Engine of Valuation System for Timber Assets). The software was designed to generate 'the standard forest valuation table' by species and province as the final output that is applicable for the forest valuation through the Forestry Household Economy Survey in Korea.