• 대한임상독성학회지
• /
• 제13권1호
• /
• pp.33-35
• /
• 2015

A 24 year-old man attempted suicide by injection of 1 cc of thinner into his left antecubital vein; 3 hours later, he visited our emergency room because of left chest pain. We suspected a chemical pneumonitis based on the abnormal findings of his chest X-ray and computed tomography. On the 3rd day after admission, a cellulitis also occurred at the injection area. His symptoms were relieved after supportive care for 2 weeks. There is significant experience with intoxication of thinner inhalation, whereas intoxication of intravenous thinner is rare.

• 소성∙가공
• /
• 제17권8호
• /
• pp.657-661
• /
• 2008

Recently, products of electronic industry and related parts are required to have the thickness thinner and thinner to reduce the part weight. To go with this trend, LGP(light guide plate) of LCD-BLU(Liquid Crystal Display-Back Light Unit: It is one of kernel parts of LCD) for cell phone has the thickness of ${\sim}0.3mm$ and the battery case of cell phone has ${\sim}0.25mm$. Accordingly, high speed injection molding is required to mold products which have thinner parts. To achieve high speed injection and proper control of hydraulic unit, various design was applied to conventional injection unit. In the present paper, we concentrated on the molding stability of hydro-mechanical high speed injection machine to make an LGP of 0.3mm thickness.

• Archives of Plastic Surgery
• /
• 제34권2호
• /
• pp.269-273
• /
• 2007

Purpose: High-pressure injection(HPI) injury is an injury caused by accidental injection of substances by industrial equipment. HPI injury of the hand is a serious injury that can be potentially devastating. There have been a number of publications on the results of its treatment and its functional outcome of these hands. Unfortunately, the clinical outcomes were unsatisfactory following an initial treatment approach of digital expression of the injection material, elevation, soaks, dressing changes, and antibiotics. Methods: A 43-year-old right handed man sustained a high pressure injection injury to the tip of the left index finger. The injected material was industrial paint thinner. Tissue necrosis was noted at the pulp of the finger. Several debridements and irrigation were required. A pedicled chest flap transfer was performed on the eighteenth day after injury as the dorsal nail complex remained viable. This is a retrospective review of our experience with high-pressure finger injection injury caused by paint. A literature review, retrospective chart and radiologic review were presented. Results: Follow-up length was about 1 year. The injuried hand was left nondominant hand, the index. Patient complaints were cold intolerance, paresthesia, contact pain, and impairment of activities of daily living. Conclusion: The outcome of high-pressure injection injuries of the hand is affected by many factors. The time between injury and operative treatment has been regarded as a key determinant by a number of authors. The nature of the injected material is probably more important. It has been noted by many authors that injuries with paints have a worse outcome than those with oil or grease. This study confirms the fact that high-pressure injection injury caused by paint thinner to the hand is a significant problem. Virtually a patient suffers sequelae of this injury. The injury has significant repercussions for future function and reintegration into the work force.

• 폴리머
• /
• 제31권2호
• /
• pp.105-110
• /
• 2007

ABS(acrylonitrile butadiene styrene)수지의 성능저하에 미치는 영향을 알아보기 위해 ABS, 도장, 도료, 사출 등 전 부문에 대한 영향도를 파악함으로써 ABS수지의 성능저하를 최소화하기 위한 최적화 방안을 수립하였다. ABS수지의 성능저하에 영향을 미치는 인자를 실험실 규모에서 검토한 결과 변형에 의한 기계적 요인보다는 사용된 화학물질의 화학적, 물리적 특성에 의한 요인이 지배적인 것으로 나타났다. ABS수지를 이용한 제조 현장에서 여러 인자(ABS수지, 사출, 화학물질, 도장 등)에 대해 검토한 결과 ABS수지 표면에 직접적으로 접촉하는 화학물질인 희석제 (시너)에 의한 영향도가 가장 큼을 확인할 수 있었다. 이번 연구 결과를 통해 수지의 성능저하에 미치는 각 인자별 영향도 수준 평가가 가능하게 되었으며, 이를 토대로 양산 시 나타나는 도장불량 등의 문제해결을 위한 관리 과정의 체계화 및 품질 변동요인의 제거 방안을 구체화할 수 있었다.

• Design & Manufacturing
• /
• 제11권1호
• /
• pp.14-18
• /
• 2017

Recently, the injection-molded products are lighter, and thinner than ever. In this work, Injection molding simulation was conducted to analysis the filling pattern imbalance in high speed injection molding process for thin-wall injection component, 8 inches LGP. Numerical analysis shows that shear heated polymer near the side wall causes filling imbalance between center and side of cavity. Short shot experiments were conducted and compared with simulation results. Filling imbalance ratio showed a tendency to increase for wider fan gate.

• 한국전기전자재료학회논문지
• /
• 제16권9호
• /
• pp.771-774
• /
• 2003

In this paper, the programming characteristics of the multi-bit devices based on SONOS structure are investigated. Our devices have been fabricated by 0.35 $\mu\textrm{m}$ complementary metal-oxide-semiconductor (CMOS) process with LOCOS isolation. In order to achieve the multi-bit operation per cell, charges must be locally frapped in the nitride layer above the channel near the source-drain junction. Programming method is selected by Channel Hot Electron (CUE) injection which is available for localized trap in nitride film. To demonstrate CHE injection, substrate current (Isub) and one-shot programming curve are investigated. The multi-bit operation which stores two-bit per cell is investigated. Also, Hot Hole(HH) injection for fast erasing is used. The fabricated SONOS devices have ultra-thinner gate dielectrics and then have lower programming voltage, simpler process and better scalability compared to any other multi-bit storage Flash memory. Our programming characteristics are shown to be the most promising for the multi-bit flash memory.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.593-600
• /
• 2012

Thixomolding of Mg-alloy is a semi-solid injection molding process utilizing thixotropic phenomenon. Using this process, higher strength, thinner wall section and tighter tolerance without porosity are obtained. It has been applied for production of near-net-shape magnesium component. To design optimal thixomolding process of Mg-alloy part, molding conditions such as slurry temperature, mold temperature and injection time should be determined properly. Selection of these parameters has been dependent upon engineers' experience and intuitiveness. In this paper, to improve mechanical properties of the thixomolded product, optimal selection of process variables such as injection velocity, barrel temperature and die temperature in the process has been studied through microstructural analysis and Taguchi method. Performance of the process is verified through experiments.

• Design & Manufacturing
• /
• 제9권2호
• /
• pp.20-24
• /
• 2015

Recently, the light guide plate (LGP), a component of the BLU, becomes thinner and larger than ever. In industrial field, specialized injection molding technique is applied to mold the ultra-thin LGP such as a ultra-high speed injection molding. Usually very high melt temperature is used for low viscosity. High injection speed and melt temperature lead to yellowing of LGP. In the present paper a series of injection molding experiment was performed under various injection molding conditions. Yellow index, CIE xy, spectral transmittance of sample were measured using the UV-Visible spectrophotometer. Systematic decrease of spectral transmittance in UV-B range was found as the melt temperature was higher. Yellow index and CIE xy were became higher near the gate location in LGP. From the result of analysis of variance, the main factor to affect for yellow index was mold temperature and that for spectral transmittance(at 315 nm) was melt temperature.

• 한국정밀공학회지
• /
• 제32권11호
• /
• pp.961-968
• /
• 2015

This study aims to develop an efficient mold structure for the injection molding of a subminiature lens, using shell-type runners instead of traditional cylindrical runners. While the shell runner has the advantage of shorter cooling time due to its thinner geometry, this smaller thickness causes an increase in injection pressure. In this study, the design of the shell runner was modified to contain multiple holes for the purpose of reducing injection pressure. Numerical analyses were performed for shell runners of various hole-shapes, and the resulting filling and cooling characteristics were discussed; the rhombic hole showed the best result for both filling and cooling characteristics. Subsequently, injection molding experiments were performed using an injection mold fabricated based on the rhombic design. The lens parts were successfully molded with highly-reduced cycle time and without degradation of part quality.

• 대한수의학회지
• /
• 제59권2호
• /
• pp.105-108
• /
• 2019

A 4-year-old cat was referred for a suspected pulmonary mass. True diaphragmatic hernia presence was diagnosed via computed tomography (CT). There was a thin membrane covering the diaphragmatic defect. The membrane was thinner than the diaphragm. After contrast injection, the membrane was less enhanced than that of the normal diaphragm. The membrane was identified as a remnant of the parietal pleura. In addition, contrast-enhanced CT images provided clarity in viewing the herniated liver and falciform fat. A thinner membrane, covering the diaphragmatic defect, and attached to the thicker normal diaphragm, is considered a unique CT feature of true diaphragmatic hernia.