• 한국약용작물학회지
• /
• 제24권6호
• /
• pp.451-457
• /
• 2016

Background: Leonurine is a the aerial part of Leonurus japonicus Houttuyn, which has been used as a traditional medicines and is registered in the Korean Pharmacopoeia. Methods and Results: In the present study we performed a heavy metals and thin layer chromatography and measured loss on drying, as well as the contents of total ash, acid-insoluble ash, ethanol soluble compounds, and leonurine, using 15 domestically collected L. japonicus samples. The methods were performed according to the 'crude drugs test of the general test, processes and apparatus', published by MFDS, Korea (2014). The purity test (heavy metals) indicated that levels of Pb and Hg were 0.35 - 3.64, and 0.001 ppm, respectively, whereas the levels of As and Cd were undetectable, and stachydrine was identified by thin layer chromatography ($R_f$ : 0.15). We found that 5.93 - 10.62% (average: $8.58{\pm}1.8%$) of the sample mass was lost during drying, and the contents of total ash, acid-insoluble ash, ethanol soluble compounds, and leonurine were 7.87 - 10.84% (average: $9.62{\pm}0.82%$), 0.99 - 1.76% (average: $1.38{\pm}0.24%$), 16.70 - 23.11% (average: $19.49{\pm}2.14%$) and 0.04 - 0.17% (average: $0.11{\pm}0.04%$) respectively. In addition, HPLC profiling detected leonurine (5.94 min), rutin (16.43 min) and myricetin (26.78 min). Conclusions: We hope that this the rusult of the present study will contribute to the standardization and quality control of Korean herbal medicines.

• Corrosion Science and Technology
• /
• 제7권2호
• /
• pp.119-124
• /
• 2008

Steel is generally not corrosion resistant to water with formation of non protective rusts on its surface. Rusts are composed of iron oxides such as $Fe_3O_4$, $\alpha-$, $\beta-$, $\gamma-$and ${\delta}-FeOOH$. However, steel, particularly weathering steel containing small amounts of Cu, Ni and Cr etc., shows good corrosion resistance against rural, industrial or marine environment. Its corrosion rate is exceedingly small as compared with that of carbon steel. According to the exposure test results undertaken in outdoor environments, the atmospheric corrosion rate for weathering steel is only 1 mm for a century. Atmospheric corrosion for steels proceeds under alternate dry and wet conditions. Dry condition is encountered on steel surface on fine or cloudy days, and wet condition is on rainy or snowy days. The reason why weathering steel shows superior atmospheric corrosion resistance is due to formation of corrosion protective rusts on its surface under very thin water layer. The protective rusts are usually composed of two layer rusts; the upper layer is ${\gamma}-FeOOH$ termed as lepidocrocite, and inner layer is nano-particle ${\alpha}-FeOOH$ termed as goethite. This paper is aimed at elucidating the atmospheric corrosion mechanism for steel in comparison with corrosion in bulky water environment by use of empirical data.The summary is as follows: 1. No corrosion protective rusts are formed on steel in bulky water. 2. Atmospheric corrosion for steel is the corrosion under wetting and drying conditions. Corrosion and passivation occur alternately on steel surface. Steel, particularly weathering steel with small amounts of alloying elements such as Cu, Ni and Cr etc. enhances forming corrosion protective rusts by passivation.

• Applied Biological Chemistry
• /
• 제17권1호
• /
• pp.42-48
• /
• 1974

고추 건조방법(乾燥方法)의 개선(改善) 및 건조특성(乾燥特性)을 알기 위하여 원형(原形) 및 절단(切斷)고추에 대(對)하여 온도(溫度)및 풍속(風速)의 영향을 조사(調査)하고 고추 건조기작(乾燥機作)을 고찰(考察)하였다. 1) 원형(原形)고추 건조곡선(乾燥曲線)의 특징(特徵)은 건조초기(乾燥初期)에는 어느정도(程度)의 settling down period를 가졌고 그이 후 제일(第一), 이기(二期) 감율건조기(減率乾燥期)를 보였으나 저온건조(低溫乾燥)일수록 항속건조양상(恒速乾燥樣相)을 띠어 임계수분함량(臨界水分含量)에 이르는, 시간(時間)이 최저온도(最低溫度)인 $55^{\circ}C$에서 15시간(時間)이나 되었다. 2) 절단(切斷)고추의 건조곡선(乾燥曲線)에서는 건조속도(乾燥速度)의 변화(蠻化)가 급격(急激)하였다. 3) 절단(切斷)고추의 건조방법(乾燥方法)은 원형건조(原形乾燥)에 비해 보다 효과적(效果的)이어서 각(各) 건조온도(乾燥溫度)에서 모두 약(約) 2배(倍) 이상(以上)의 건조시간(乾燥時間)을 단축(短縮)할 수 있었다. 4) 원형(原形) 및 절단건조(努斷乾燥) 모두 건조속도상수(乾燥速度常數)(k)값은 일정(一定)하지않고 시간(時間)에따라 변화(變化)하였으나 양건조방법(兩乾燥方法)에서 k값의 시간(時間)에 대(對)한 변화양상(變化樣相)이 구별(區別)되었다. 5) 건조속도상수(乾燥速度常數) k 값을 일정(一定)한 평균치(平均値)로 택(擇)할 경우, 원형건조(原形乾燥)에 대(對)하여는 $M-M_e/M_o-M_e=e^{-0.118t}$식(式는)이 절단건조(切斷乾燥)에 대(對)하여는 $M-M_e/M_o-M_e=e(-0.342t^{0.128})$식(式)이 적용되었다.

• 한국세라믹학회지
• /
• 제31권8호
• /
• pp.911-919
• /
• 1994

As the study for preparation of single-layer anti-reflective coating on glass, the conditions of synthesis of sol for coating and of reproducible coating procedure were investigated. In case of water-based sol, coating was impossible because of poor wettability of sol. The Substitution of solvent with ethanol improved the wettability of sol on the glass surface, and optimum amount of ethanol for substitution was 70 vol%. Maximum specific surface area and total pore volume of water-based sol were 268.7$m^2$/g and 0.315 cc/g, but after substitution, those values increased to 404.1 $m^2$/g and 0.376 cc/g, respectively. The upper limit withdrawl speed of coating in order to get clean coated films without aggregations or stains was 7 cm/min. In case of addition of 0.1 mol HNO3 and substitution with 70 vol% ethanol and heat-treatment at 40$0^{\circ}C$ for 1 hour, thin film with thickness of 94 nm was obtained at withdrawl speed of 4 cm/min. The thickness of thin film was independent of drying time.

• 한국식품저장유통학회지
• /
• 제22권1호
• /
• pp.1-11
• /
• 2015

ANOVA 분석을 통해 건조온도와 건조시간이 열풍건조와 냉풍건조의 중요변수임을 알 수 있었으며 복분자의 반건조를 위해서는 열풍건조의 경우 $65.8^{\circ}C$, 4.3시간이 적당하였고 냉풍건조의 경우 비슷한 정도의 건조수분함량까지 28.2시간이 걸렸다. 그러나 건조온도가 높아지면 vitamin C와 ellagic acid의 함량이 줄어드는 등 품질적 열화가 심하게 나타났다. 또한 생리활성물질들은 냉풍건조에서 전반적으로 더 잘 보존 되었으며 총폴리페놀의 함량에서는 더욱 그러하였다. 따라서 냉풍건조방법은 고품질의 반건조 복분자 제조에 적합한 건조방법이며 최적 건조조건은 $21.3^{\circ}C$, 28.2시간으로 나타났다.

• 한국기계가공학회지
• /
• 제18권12호
• /
• pp.45-51
• /
• 2019

As the separator becomes thinner, the role of thermal stability becomes more important in ensuring the high capacity of medium- and large-sized lithium-ion secondary batteries. In this study, we researched coating technology to improve the separator's thermal stability. We minimized the coating time by optimizing the design of a vertical two-stage coater that was thin, uniform, and capable of coating on both sides at the same time with a maximum 2㎛ thickness coating layer of fluorinated polymer (PVdF-HFP) on the bare polyethylene (PE) separator, which increased the thermal stability. In addition, during the coating process, a dual-jacket-roll method of drying was developed that increased the drying effectiveness without thermal damage to the separator. We also investigated the thermal stability of the separator manufactured from a coating machine, and studied the battery-applied performance by making a lithium-ion pouch battery.

• 한국균학회지
• /
• 제20권4호
• /
• pp.302-308
• /
• 1992

Seven genera and 15 species of fungi were isolated from 50 samples of then different steps of dried onion (5 samples of each step) collected from an onion factory in Sohag Governorate, Egypt, and grown on glucose-Czapek's agar (7 genera and 15 species) and 10% NaCl glucose-Czapek's (2 genera and 6 species). The average total counts of fungi were gradually decreased throughout the different steps of drying from 2090 to zero and 152 to zero colonies/g on glucose-Czapek's agar and 10% NaCl glucose-Czapek's agar media, respectively. Aspergillus was the most common genus on the two types of media used. The dominant species were Aspergillus niger, A. flavus, A. terreus, Penicillium chrysogenum and Fusarium of oxysporum on glucose-Czapek's agar and A. terreus and A. niger on 10% NaCl glucose-Czapek's agar. The chloroform extracts of different samples were tested for the presence of mycotoxins using thin layer chromatographic analysis. The results indicated that aflatoxin was present at concentrations decreased throughout the different steps of the drying from step No. 1, onion bulbs, $120\;{\mu}g/kg$; to step No. 8, standard A, $20\;{\mu}g/kg$ while step Nos. 9 & 10 (completely dry powdered onion) were free from aflatoxin. Citrinin was also present in the first three steps at concentrations gradually decreased from 30 to 10 mg/kg.

• 멤브레인
• /
• 제24권4호
• /
• pp.292-300
• /
• 2014

내염소성을 갖는 염제거공정용 술폰화 폴리아릴렌 에테르 술폰 랜덤 공중합체(SPAES) thin film composite (TFC)막이 모노글라임 용매를 이용하여 제조되었다. 모노글라임은 선택층인 SPAES만을 용해시키며, 다공성 폴리술폰(예 : Udel$^{(R)}$)층에 대해 비용해성을 지녀, TFC 제조를 위한 선택적 용매로 사용될 수 있다. 또한 개미산이나 디에틸글리콜과는 달리, 환경적으로 무해하며, 매우 낮은 끊는점을 지녔다는 점이 또 다른 장점이 될 수 있다. 다공성 Udel$^{(R)}$ 지지체 위에 코팅시, 코팅용액이 기공구조에 침투하여 유수량을 감소시키는 기공투과현상이 발생하는데, 이를 최소화하기 위해 지지체를 이소프로필알콜과 글리세린 혼합액에서 전처리 후에, 코팅-건조 공정을 통해 결함이 없는 SPAES TFC로 제조된다. 또한, SPAES 선택층의 술폰화도, 고정이온의 염상태 및 물리-화학적 가교효과를 SPAES TFC막을 통한 투과거동과 관련하여 관찰하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4221-4226
• /
• 2011

Honeycomb-patterned polyvinypyrrolidone (PVP) thin films coated with nanometer-sized silver particles were prepared using honeycomb-patterned polystyrene (PS) template films fabricated by casting a polystyrene solution under humid condition. Silver was first metallized on the patterned PS films via silver nitrate ($AgNO_3$) reduction using tetrathiafulvalene (TTF) and a small amount of PVP as the reductant and dispersing agent, respectively. The effects of $AgNO_3$, TTF, and PVP solution concentrations during the reduction process in acetonitrile were determined to obtain a uniform silver-coated honeycomb-patterned PS film. Second, the silver-metallized patterned porous PS films were filled with high PVP concentration solutions via the spincoating process. Silver-coated patterned PVP films were obtained by peeling off the PVP layer from the template PS film after drying. The results show that the honeycomb-patterned PVP films uniformly coated with silver particles are conveniently obtained using the silver-coated patterned PS template, although the direct fabrication of these films using water droplets under humid conditions was not feasible because of the water solubility of PVP.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2003년도 하계 학술대회 논문집
• /
• pp.220-225
• /
• 2003

고품질 쌀 생산의 주요 요인은 벼의 품종, 재배방법 및 수확 후 처리기술 등이 있는데 최근에 많은 품종육종과 재배방법의 개선으로 산지별 품종별 차이는 점차적으로 감소하는 추세이다. 수확 후 처리기술에는 건조, 저장, 가공, 포장 및 유통기술 등이 있으며, 고품질 쌀 생산의 중요한 기술이다. 특히, 건조기술은 수확 후 처리기술 중에서 첫 번째 기술로, 건조기술이 적절치 못하면 저장, 가공 및 포장 등 후속 기술에 악영향을 줌으로 건조기술은 고품질 쌀 생산에 관건이 되는 기술이다. (중략)