• 한국결정성장학회지
• /
• 제15권3호
• /
• pp.120-123
• /
• 2005

[ $Li_2CO_3-V_2O_5$ ], flux를 사용한 liquid phase epitaxy(LPE) 법을 사용하여 $LiNbO_3$ (001) 기판위에 5 mol% ZnO가 첨가된 $LiNbO_3$, 박막과 2 mol% MgO가 첨가된 $LiNbO_3$, 박막을 성장시켰다. $Zn:LiNbO_3$, 막과 $Mg:LiNbO_3$, 막과의 결정성과 격자 부정합은 x-ray rocking curve(XRC)로 분석되었다. 그리고 다층 박막의 단면에서의 ZnO와 MgO의 분포가 electron probe micro analyzer(EPMA)를 사용하여 관측되었다.

• KSBB Journal
• /
• 제24권6호
• /
• pp.515-520
• /
• 2009

This study presented facile method of cell patterning using fabricated PDMS patterns on polyelectrolyte coated surface. This basic principle is the fabrication of functional surface presenting two orthogonal surfaces such as cell adhesive and repellent properties. Cell adhesive surface was firstly fabricated with simple coating of polyelectrolyte multilayer. And then, the desired patterns of PDMS for the prevention of nonspecific binding of cells were transferred onto the previously formed thin film of polyelectrolyte multilayer. Thus, we could prepare novel functional surface simultaneously containing PDMS and polyelectrolyte region. As expected, the PDMS regions showed effective prevention of nonspecific binding of cell and the other region, exposed polyelectrolyte area, provided cell adhesive environment. The height of formed PDMS structure was about 100 nm. Based on this method, cell patterning can be successfully obtained with various pattern shapes and sizes. Therefore, we expect that this simple method will be useful platform technology for the development of cell chip, cell based assay system, and biochip.

• Composites Research
• /
• 제20권2호
• /
• pp.27-31
• /
• 2007

미래의 환경에서는 위성을 이용한 통신서비스의 운송체 내에서의 사용이 기하급수적으로 확대될 전망이다. 이를 위해서는 안테나의 성능 향상 및 역학적 에너지의 고효율성에 기하고, 구조적인 안정을 보장하기 위한 복합 안테나 구조의 설계, 제조 및 해석 기술이 필요하다. 복합 안테나 구조가 안테나의 역할 및 구조체로의 역할을 하기 위해서는 접착필름의 사용이 필수적이다. 하지만 접착필름은 얇은 두께로 인하여 설계시 고려되지 못하고 유전체로 작용하여 전자기적 영향을 끼치게 되어 설계자가 기대하는 성능을 얻지 못한다. 따라서, 이러한 접착필름의 전자기적 특성을 실험적으로 알아본다.

• 한국세라믹학회지
• /
• 제52권2호
• /
• pp.123-127
• /
• 2015

Soda-lime silicate (SLS) glass was strengthened by ion exchange for application of thin and lightweight bulletproof windows. The optimal conditions for ion exchanged SLS glass (thickness of 3 and 10 mm) at $480^{\circ}C$ were 10 and 17 min, respectively. The Vickers hardness values of the strengthened SLS glass samples with thicknesses of 3 and 10 mm were $5.9{\pm}0.22$ and $6.7{\pm}0.17GPa$, respectively, which values were about 22% higher than those of parent SLS glass. By laminating a multilayer defense film and polycarbonate sheet with ion exchanged SLS glass, we were able to make a thin and lightweight bulletproof window (24.25 mm, 4.57 kg, $50.06kg/m^2$, $V_{50}$ 901.8 m/s). As a result, the thickness of the bulletproof window was decreased by about 39% from 40 to 24.25 mm. The light transmittance in the visible range satisfied the standard (over 76%) for bulletproof windows.

• 한국세라믹학회지
• /
• 제45권9호
• /
• pp.524-530
• /
• 2008

Anti-Reflective (AR) thin film coatings of $SiO_2$ (n= 1.48) and $TiO_2$ (n=2.17) were deposited by ion-beam assisted deposition (IBAD) with End-Hall ion source and conventional electron beam (e-beam) evaporation to investigate the effect of deposition method on the refractive indicies (n) of the fIlms. Green-light generation using a GaAs laser diode was achieved via excitation of the second harmonic. The latter resulted from the transmission of the fundamental guided-mode wave of 1064 nm through periodically poled $LiNbO_3$. Large differences in the refractive indicies of each of the layers in the multilayer coating may improve AR performance. IBAD of $SiO_2$ reduced its refractive index from 1.45 to 1.34 at 1064 nm. Conversely, e-beam evaporation of $TiO_2$ increased its refractive index from 1.80 to 2.11. In addition, no fluctuations in absorption at the wavelength of 1064 nm were found. The results suggest that films prepared by different deposition methods can increase the effectiveness of multilayer AR coatings.

• 한국자기학회지
• /
• 제25권5호
• /
• pp.149-155
• /
• 2015

자성박막의 미세패턴 소자 제작을 위해 전자 사이크로트론 공명(electron cyclotron resonance; ECR) Ar 이온밀링 시스템을 제작하였다. 소자 식각에 적용한 ECR 이온밀링 시스템에서 주파수 2.45 GHz 파장 12.24 cm의 마이크로파 소스인 마그네트론은 전력 600 W에 의해 가동되어 파장의 정수배에 맞추어 만든 도파관을 통하여 전달되도록 설계하였다. 마이크로파 주파수와 공명시키기 위해 전자석으로 908 G의 자기장을 인가하였고, 알곤 개스를 cavity에 유입시켜서 방전된 이온들은 그리드 사이에 인가한 약 1000 V의 가속전압에 의한 에너지를 갖고 표면을 밀링한다. 이것을 이용하여 다층구조 GMR-SV(giant magnetoresistance-spin valve) 자성박막에 광 리소그래피, 이온밀링 및 전극제작 공정과정을 마치고 폭이 $1{\mu}m$에서 $9{\mu}m$까지의 소자들을 제작하여 광학현미경으로 소자 크기를 관찰하였다.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.502-510
• /
• 2018

In order to accumulate data to lower the friction coefficient of a press mold, tribological tests were performed before and after coating SM45C with a PVC/PO film and plasma coating (CrN, concept). The ultrasonic nanocrystal surface modification (UNSM)-treated material had a nano-size surface texture, high surface hardness, and large and deep compressive residual stress formation. Even when the load was doubled, the small amount of abrasion, small weight of the abrasion, and width and depth of the abrasion did not increase as much as those of untreated materials. A comparison of the weight change before and after the tribological test with the CrN and the concept coating material and that of the untreated material showed that the wear loss of the concept coating material and P-UNSM treated material (that is, the UNSM treated material treated with the concept coating) showed a tendency to decrease by approximately 55-75%. Concept 100N had a lower friction coefficient of about 0.6, and P-UNSM-30-100N showed almost the same curve as concept 100N and had a low coefficient of friction of about 0.6. The concept multilayer coating had a thickness of $5.32{\mu}m$. In the beginning, the coefficient of friction decreased because of the plasma coating, but it started to increase from about 250-300 s. After about 350 s, the coefficient of friction tended to approach the friction coefficient of the SM45C base metal. The SGV-280F film-attached test specimen was slightly pushed back and forth, but the SM45C base material was not exposed due to abrasion. The friction coefficient was 0.22, which was the lowest, and the tribological property was the best in this study.

• 한국자기학회지
• /
• 제4권4호
• /
• pp.313-318
• /
• 1994

전자빔 증착 Co/Pt 다층박막에서 증발원자의 입사방향이 자기 및 자기광학적 성질에 미치는 영향을 조사하였다. 조성변조 Co/Pt 다층박막을 증발원자의 입사방향이 $0^{\circ},\;15^{\circ},\;30^{\circ},\;45^{\circ},\;60^{\circ}$이 되도록 하여 전자빔 증착법으로 제조한 후 x-ray 회절실험, 주사전자현미경으로 구조분석을 하였고, VSM, torque magnetometer, Kerr loop tracer를 사용하여 자기 및 자기광학적 성질을 조사하였다. x-ray 회절실험을 통해 모든 시료가 조성변조 다층박막 구조로 만들어졌음을 확인하였고, 입사각이 증가함에 따라 주상구조의 성장방향은 기판 수직선에서 벗어나지만 <111> 결정방향은 기판 수직선 가까이에 존재함이 관찰되었다. 포화자화값 $M_{s}$, Kerr회전각 ${\theta}k$는 입사각이 증가하면 줄어들었는데 이는 박막의 밀도 감소 때문이다. 자기이방성 또한 입사각의 증가에 따라 줄어들었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권4호
• /
• pp.467-472
• /
• 2012

In this paper, we present a finite element method (FEM) study on the space charge effects in organic light emitting diodes. The physical model covers all the key physical processes in OLEDs, namely charge injection, transport and recombination, exciton diffusion, transfer and decay as well as light coupling, and thin-film-optics. The exciton model includes generation, diffusion, and energy transfer as well as annihilation. We assumed that the light emission originates from oscillation which thus is embodied as exciton in a stack of multilayer. We discuss the accumulation of charges at internal interfaces and their signature in the transient response as well as the electric field distribution. We also report our investigation on the influence of the insertion of the emission layer (EML) in the bilayer structure.

• 한국광학회지
• /
• 제4권2호
• /
• pp.162-167
• /
• 1993

유전체 다층박막에 빛이 사각으로 입사할 결우 편광에 의존하는 현상이 나타나므로 사용하기에 바람직하지 못하다. 본 연구에서는 이러한 편광효과를 줄이기 위하여 기존의 몇가지 설계법을 이용하여 비편광 광분리기를 설계해 보고 이 방법들을 응용하여 박막의 광학적두께가 ${\lambda}$/4로 일정할 때 최외각등가층의 반사율을 조절하는 방법을 사용하여 비편광 광분리기를 설계하였다.