• 제목/요약/키워드: Thin insulating film

검색결과 192건 처리시간 0.021초

Hot Wall Epitaxy(HWE)에 의한 $ZnGa_2Se_4$단결정 박막 성장과 특성에 관한 연구 (Growth and Characterization of $ZnGa_2Se_4$ Single Crystal Thin Films by Hot Wall Epitaxy)

  • 장차익;홍광준;정준우;백형원;정경아;방진주;박창선
    • 한국결정학회지
    • /
    • 제12권3호
    • /
    • pp.127-136
    • /
    • 2001
  • ZnGa₂Se₄단결정 박막은 수평 전기로에서 함성한 ZnGa₂Se₄다결정을 증발원으로하여, hot wall epitaxy(HWE) 방법으로 증발원과 기판(반절연성-GaAs(100))의 온도를 각각 610℃, 450℃로 고정하여 단결정 박막을 성장하였다. 10 K에서 측정한 광발광 exciton 스펙트럼과 이중결정 X-선 요동곡선(DCRC)의 반치폭(FWHM)을 분석하여 단결정 박막의 최적 성장 조건을 얻었다. Hall효과는 van der Pauw방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293 K에서 각각 9.63×10/sup 17/㎤, 296 ㎠/V·s였다. 광전류 봉우리의 10 K에서 단파장대의 가전자대 갈라짐(splitting)에의해서 측정된 Δcr (crystal field splitting)은 183.2meV, △so (spin orbit splitting)는 251.9meV였다. 10K의 광발광 측정으로부터 고품질의 결정에서 볼 수 있는 free exciton 과 매우 강한 세기의 중성 받개 bound exciton등의 피크가 관찰되었다. 이때 중성 받개 bound exciton등의 피크가 관찰되었다. 이때 중성 반개 bound excition의 반치폭과 결합에너지는 각각 11meV와 24.4meV였다. 또한 Hanes rule에 의해 구한 불순물의 활성화 에너지는 122meV였다.

  • PDF

Hot Wall Epitaxy (HWE)에 의한 $CdGa_2Se_4$ 단결정 박막 성장과 특성 (Growth and Characterization of $CdGa_2Se_4$ Single Crystal Thin Films by Hot Wall Epitaxy)

  • 최승평;홍광준
    • 센서학회지
    • /
    • 제10권6호
    • /
    • pp.328-337
    • /
    • 2001
  • 수평 전기로에서 $CdGa_2Se_4$ 다결정을 합성하여 HWE 방법으로 $CdGa_2Se_4$ 단결정 박막을 반절연성 GaAs(100) 위에 성장하였다. $CdGa_2Se_4$ 단결정 박막은 증발원과 기판의 온도를 각각 $630^{\circ}C$, $420^{\circ}C$로 성장하였다. 10K에서 측정한 광발광 exciton 스펙트럼과 이중결정 X-선 요동곡선(DCRC)의 반치폭(FWHM)을 분석하여 단결정 박막의 최적 성장 조건을 얻었다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293K에서 각각 $8.27{\times}10^{17}/cm^3$, $345\;cm^2/V{\cdot}s$였다. 광전류 봉우리의 10K에서 단파장대의 가전자대 갈라짐(splitting)에 의해서 측정된 ${\Delta}Cr$ (crystal field splitting)은 106.5 meV, ${\Delta}So$ (spin orbit splitting)는 418.9 meV였다. 10K의 광발광 측정으로부터 고품질의 결정에서 볼 수 있는 free exciton 과 매우 강한 세기의 중성 주개 bound exciton등의 피크가 관찰되었다. 이때 중성 주개 bound exciton의 반치폭과 결합 에너지는 각각 8 meV와 13.7 meV였다. 또한 Haynes rule에 의해 구한 불순물의 활성화 에너지는 137 meV 였다.

  • PDF

고유전율 AIN 절연층을 사용한 비휘발성 강유전체 메모리용 MFIS 구조의 제작 및 특성 (Fabrications and Properties of MFIS Structures using high Dielectric AIN Insulating Layers for Nonvolatile Ferroelectric Memory)

  • 정순원;김광희;구경완
    • 대한전자공학회논문지SD
    • /
    • 제38권11호
    • /
    • pp.765-770
    • /
    • 2001
  • 고온 급속 열처리시킨 LiNbO₃/AIN/Si(100) 구조를 이용하여 MFIS 소자를 제작하고, 비휘발성 메모리 동작 가능성을 확인하였다. 고유전율 AIN 박막 위에 Pt 전극을 증착시켜 제작한 MIS 구조에서 측정한 1MHz C-V 특성곡선에서는 히스테리시스가 전혀 없고 양호한 계면특성을 보였으며, 축적 영역으로부터 산출한 비유전율 값은 약 8 이었다. Pt/LiNbO₃/AIN/Si(100) 구조에서 측정한 1MHz C-V 특성의 축적영역에서 산출한 LiNbO₃ 박막의 비유전율 값은 약 23 이었으며, ±5 V의 바이어스 범위 내에서의 메모리 윈도우는 약 1.2 V이었다. 이 MFIS 구조에서의 게이트 누설전류밀도는 ±500 kV/cm의 전계 범위 내에서 10/sup -9/ A/㎠ 범위를 유지하였다. 500 kHz의 바이폴러 펄스를 인가하면서 측정한 피로특성은 10/sup 11/ cycle 까지 초기값을 거의 유지하는 우수한 특성을 보였다.

  • PDF

Hot Wall Epitaxy(HWE)법에 의한 $AgGaSe_2$ 단결정 박막 성장과 광전기적 특성 (Growth and Opoelectrical property for $AgGaSe_2$ single crystal thin film by hot wall epitaxy)

  • 윤석진;홍광준
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.122-123
    • /
    • 2007
  • Single crystal $AgGaSe_2$ layers were grown on thoroughly etched semi-insulating GaAs(100) substrate at $420^{\circ}C$ with hot wall epitaxy (HWE) system by evaporating $AgGaSe_2$ source at $630^{\circ}C$. The temperature dependence of the energy band gap of the $AgGaSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g$(T)=1.9501 eV - $(8.79{\times}10^{-4}\;eV/K)T^2$/(T+250 K). The crystal field and the spin-orbit splitting energies for the valence band of the $AgGaSe_2$ have been estimated to be 0.3132 eV and 0.3725 eV at 10 K, respectively, by means of the photocurrent spectra and the Hopfield quasicubic model. These results indicate that the splitting of the ${\Delta}so$ definitely exists in the ${\Gamma}_5$ states of the valence band of the $AgGaSe_2$. The three photocurrent peaks observed at 10 K are ascribed to the $A_{1^-},\;B_{1^-},\;and\;C_{1^-}$exciton peaks for n=1.

  • PDF

Cross-Linked PVP 게이트 유기 박막트랜지스터 (Organic Thin Film Transistors with Cross-Linked PVP Gates)

  • 장지근;오명환;장호정;김영섭;이준영;공명선;이영관
    • 마이크로전자및패키징학회지
    • /
    • 제13권1호통권38호
    • /
    • pp.37-42
    • /
    • 2006
  • 유기 박막트랜지스터(OTFTs)제작에서 PVP-게이트 절연막의 형성과 처리가 소자성능에 미치는 영향을 조사하였다. 유기 게이트 용액의 제조에서는 polyvinyl 계열의 PVP(poly-4-vinylphenol)를 용질로, PGMEA (propylene glycol monomethyl ether acetate)를 용매로 사용하였다. 또한 열경화성 수지인 poly(melamine-co-formaldehyde)를 경화제로 사용하여 유기 절연막의 cross-link를 시도하였다. MIM 시료의 전기적 절연 특성을 측정한 결과, PVP-기반 유기 절연막은 용액의 제조에서 PGMEA에 대한 PVP와 poly (melamine-co-formaldehyde)의 농도를 증가시킬수록 낮은 누설전류 특성을 나타내었다. OTFT 제작에서는 PGMEA에 대해 PVP를 20 wt%로 섞은 PVP(20 wt%) copolymer와 5 wt%와 10 wt%의 poly(melamine-co-formaldehyde)를 경화제로 추가한 cross-linked PVP(20 wt%)를 게이트 유전 재료로 사용하였다. 제작된 트랜지스터들에서 전계효과 이동도는 5 wt % cross-linked PVP(20 wt%) 소자에서 $0.31cm^2/Vs$로, 그리고 전류 점멸비는 10 wt% cross-linked PVP(20 wt%) 소자에서 $1.92{\times}10^5$으로 가장 높게 나타났다.

  • PDF

Hot Wall Epitaxy(HWE)범에 의한 $CuInSe_2$ 단결정 박막 성장과 가전자대 갈라짐에 대한 광전류 연구 (Growth and photocurrent study on the splitting of the valence band for $CuInSe_2$ single crystal thin film by hot wall epitaxy)

  • 홍명석;홍광준
    • 한국결정성장학회지
    • /
    • 제14권6호
    • /
    • pp.244-252
    • /
    • 2004
  • $CuISe_2$ 단결정 박막은 수평 전기로에서 합성한 $CuInSe_2$ 다결정을 증발원으로하여, hot wall epitaxy(HWE) 방법으로 증발원과 기판(반절연성-GaAs(100))의 온도를 각각 $620^{\circ}C$, $410^{\circ}C$로 고정하여 단결정 박막을 성장하였다. 이때 단결정 박막의 결정성은 광발광 스펙트럼과 이중결정 선 요동곡선(DCRC) 으로 부터 구하였다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 293K에서 운반자 농도와 이동도는 각각 $9.62\times10^{16}/\textrm{cm}^3$, 296 $\textrm{cm}^2$/Vㆍs 였다. $CuAlSe_2$/Si(Semi-Insulated) GaAs(100) 단결정 박막의 광흡수와 광전류 spectra를 293k에서 10K까지 측정하였다. 광흡수 스펙트럼으로부터 band gap $E_g$(T)는 Varshni 공식에 따라 계산한 결과 1.1851 eV-($8.99\times10^{-4} eV/K)T^2$/(T+153k)였다. 광전류 스펙트럼으로 부터 Hamilton matrix(Hopfield quasicubic mode)법으로 계산한 결과 crystal field splitting Δcr값이 0.0087eV이며 spin-orbit Δso값은 0.2329 eV임을 확인하였다. 10K일 때 광전류 봉우리들은 n = 1일때 $A_1-, B_1$-와 $C_1$-exciton봉우리임을 알았다.

Hot Wall Epitaxy(HWE)법에 의한 CuAlSe2 단결정 박막의 성장과 가전자대 갈라짐에 대한 광전류 연구 (Photocurrent Study on the Splitting of the Valence Band and Growth of CuAlSe2 Single Crystal Thin Film by Hot Wall Epitaxy)

  • 박창선;홍광준;박진성;이봉주;정준우;방진주;김현
    • 센서학회지
    • /
    • 제13권2호
    • /
    • pp.157-167
    • /
    • 2004
  • A stoichiometric mixture of evaporating materials for $CuAlSe_{2}$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $CuAlSe_{2}$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. The source and substrate temperatures were $680^{\circ}C$ and $410^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of $CuAlSe_{2}$ single crystal thin films measured with Hall effect by van der Pauw method are $9.24{\times}10^{16}cm^{-3}$ and $295cm^{2}/V{\codt}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the $CuAlSe_{2}$ obtained from the absorption spectra was well described by the Varshni's relation, $E_{g}(T)$ = 2.8382 eV - ($8.68{\circ}10^{-4}$ eV/K)$T^{2}$/(T + 155 K). The crystal field and the spin-orbit splitting energies for the valence band of the $CuAlSe_{2}$ have been estimated to be 0.2026 eV and 0.2165 eV at 10 K, respectively, by means of the photocurrent spectra and the Hopfield quasicubic model. These results indicate that the splitting of the ${\Delta}so$ definitely exists in the ${\Gamma}_{5}$ states of the valence band of the $CuAlSe_{2}$. The three photocurrent peaks observed at 10 K are ascribed to the $A_{1-}$, $B_{1-}$, and $C_{1-}$ exciton peaks for n = 1.

Hot Wall Epitaxy(HWE)법에 의한 $AgInS_2$단결성 박막의 성장과 가전자대 갈라짐에대한 광전류 연구 (Photocurrent Study on the Splitting of the Valence Band and Growth of $AgInS_2$GaAs Single Crystal Thin Film by Hot Wall Epitaxy)

  • 홍광준
    • 한국결정학회지
    • /
    • 제12권4호
    • /
    • pp.197-206
    • /
    • 2001
  • 수평 전기로에서 AgInS₂ 다결정을 합성하여 HWE(Hot Wall Epitaxy)방법으로 AgInS₂ 단결정 박막을 반절연성 GaAs(100)기판에 성장시켰다. AgInS₂ 단결정 박막의 성장 조건은 증발원의 온도 680℃, 기판의 온도 410℃였고 성장 속도는 0.5㎛/hr였다. AgInS₂ 단결정 박막의 결정성의 조사에서 10 K에서 광발광(photoluminescence)스펙트럼이 597.8 nm(2.0741 eV)에서 exciton emission스펙트럼이 가장 강하게 나타났으며, 또한 이중결정 X-선 요동곡선(DCRC)의 박폭치(FWHM)도 121 arcsec로 가장 작아 최적 성장 조건임을 알수 있었다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293K에서 각각 9.35×10/sup 16/㎤, 294㎠/V·s 였다. AgInS₂ /SI(SEmi-Insulated) GaAs(100) 단결정 박막의 광흡수와 광전류 spectra를 293K에서 10K까지 측정하였다. 광흡수 스펙트럼으로부터 band gap E/sub g/(T)는 Varshni 공식에 따라 계산한 결과 2.1365eV-(9.89×10/sup-3/eV/K/)T²(T+2930K)이었으며 광전류 스펙트럼으로부터 Hamiltopn matrix(Hopfield quasicubic mode)법으로 계산한 결과 crystal field splitting Δcr값이 0.1541eV이며 spin-orbit Δso 값은 0.0129eV임을 확인하였다. 10K일때 광전류 봉우리들은 n=1 일때 A₁-, B-₁와 C₁-exction 봉우림을 알았다.

  • PDF

Hot Wall Epitaxy (HWE)법에 의한 AgGa$Se_2$ 단결정 박막 성장과 특성 (Growth and Characterization of AgGa$Se_2$ Single Crystal Thin Films by Hot Wall Epitaxy)

  • 홍광준;이관교;박진성
    • 한국재료학회지
    • /
    • 제11권5호
    • /
    • pp.419-426
    • /
    • 2001
  • AgGaSe$_2$ 단결정 박막은 수평 전기로에서 합성한 $AgGaSe_2$ 다결정을 증발원으로 하여, hot wall epitaxy (HWE) 방법으로 증발원과 기판 (반절연성-GaAs(100)) 의 온도를 각각 $630^{\circ}C$, $420^{\circ}C$로 고정하여 박막 결정 성장을 하였다. 10K에서 측정한 광발광 excition 스펙트럼과 이중결정 X-선 요동곡선 (DCRC) 의 반치폭 (FWHM )을 분석하여 단결정 박막의 최적 성장 조건을 얻었다. Hall효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293k에서 각각 4.89$\times$$10^{ 16}$/㎤, 129$\textrm{cm}^2$/V.s였다. 광전류 봉우리의 10K에서 단파장대의 가전자대 갈라짐 (splitting)에 의해서 측정된 $\Delta$C$_{r}$ (crystal field splitting)은 0.1762eV, $$\Delta$S_{o}$ (spin orbit splitting)는 0.2494eV였다 10K의 광발광 측정으로부터 고풍질의 결정에서 볼 수 있는 free excitors과 매우 강한 세기의 중성 주개 bound excitors등의 피크가 관찰되었다. 이때 중성 주개 bound ekciton의 반치폭과 결합에너지는 각각 BmeV와 14.1meV였다. 또한 Haynes rule에 의해 구한 불순물의 활성화 에너지는 141meV였다.rule에 의해 구한 불순물의 활성화 에너지는 141meV였다.

  • PDF

PVP-기반 유기 절연막 형성과 OTFT 제작 (Formation of PVP- Based Organic Insulating Layers and Fabrication of OTFTs)

  • 장지근;서동균;임용규
    • 한국재료학회지
    • /
    • 제16권5호
    • /
    • pp.302-307
    • /
    • 2006
  • The formation and processing of organic insulators on the device performance have been studied in the fabrication of organic thin film transistors (OTFTs). The series of polyvinyls, poly-4-vinyl phenol(PVP) and polyvinyltoluene (PVT), were used as solutes and propylene glycol monomethyl ether acetate(PGMEA) as a solvent in the formation of organic insulators. The cross-linking of organic insulators was also attempted by adding the thermosetting material, poly (melamine-co-formaldehyde) as a hardener in the compound. The electrical characteristics measured in the metal-insulator-metal (MIM) structures showed that insulating properties of PVP layers were generally superior to those of PVT layers. Among the layers of PVP series: PVP(10 wt%) copolymer, 5 wt% cross-linked PVP(10 wt%), PVP(20 wt%) copolymer, 5 wt% cross-linked PVP(20 wt%) and 10 wt% cross-linked PVP(20 wt%), the 10 wt% cross-linked PVP(20 wt%) layer showed the lowest leakage current characteristics. Finally, inverted staggered OTFTs using the PVP(20 wt%) copolymer, 5 wt% cross-linked PVP(20 wt%) and 10 wt% cross-linked PVP(20 wt%) as gate insulators were fabricated on the polyether sulphone (PES) substrates. In our experiments, we could obtain the maximum field effect mobility of 0.31 $cm^2/Vs$ in the device from 5 wt% cross-linked PVP(20 wt%) and the highest on/off current ratio of $1.92{\times}10^5$ in the device from 10 wt% cross-linked PVP(20 wt%).