• Smart Structures and Systems
• /
• v.13 no.4
• /
• pp.659-683
• /
• 2014

The static analysis of structures with arbitrary cross-section geometry and material lamination via a refined one-dimensional (1D) approach is presented in this paper. Higher-order 1D models with a variable order of expansion for the displacement field are developed on the basis of Carrera Unified Formulation (CUF). Classical Euler-Bernoulli and Timoshenko beam theories are obtained as particular cases of the first-order model. Numerical results of displacement, strain and stress are provided by using the finite element method (FEM) along the longitudinal direction for different configurations in excellent agreement with three-dimensional (3D) finite element solutions. In particular, a layered thin-walled cylinder is considered as first assessment with a laminated conventional cross-section. An atherosclerotic plaque is introduced as a typical structure with arbitrary cross-section geometry and studied for both the homogeneous and nonhomogeneous material cases through the 1D variable kinematic models. The analyses highlight limitations of classical beam theories and the importance of higher-order terms in accurately detecting in-plane cross-section deformation without introducing additional numerical problems. Comparisons with 3D finite element solutions prove that 1D CUF provides remarkable three-dimensional accuracy in the analysis of even short and nonhomogeneous structures with arbitrary geometry through a significant reduction in computational cost.

• Wind and Structures
• /
• v.8 no.5
• /
• pp.325-342
• /
• 2005

This paper deals with the buckling behavior of thin-walled aboveground tanks under wind load. In order to do that, the wind pressures are obtained by means of wind-tunnel experiments, while the structural non linear response is computed by means of a finite element discretization of the tank. Wind-tunnel models were constructed and tested to evaluate group effects in tandem configurations, i.e. one or two tanks shielding an instrumented tank. Pressures on the roof and on the cylindrical part were measured by pressure taps. The geometry of the target tank is similar in relative dimensions to typical tanks found in oil storage facilities, and several group configurations were tested with blocking tanks of different sizes and different separation between the target tank and those blocking it. The experimental results show changes in the pressure distributions around the circumference of the tank for half diameter spacing, with respect to an isolated tank with similar dimensions. Moreover, when the front tank of the tandem array has a height smaller than the target tank, increments in the windward pressures were measured. From the computational analysis, it seems that the additional stiffness provided by the roof prevents reductions in the buckling load for cases even when increments in pressures develop in the top region of the cylinder.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1524-1525
• /
• 2007

A flexible tactile sensor module based on polyimide matrix integrated with sensing elements and pluggable terminals connector was fabricated by polymer micromachining technology for robotic applications. The tactile sensor arrays are composed of $4{\times}4$, $8{\times}8$ and $16{\times}16$ sensing elements connected with pluggable terminals connector, respectively. Especially, both the tactile sensor array and the pluggable terminals are formed in the sensor module during the fabrication process. The fabricated tactile sensor module is measured continuously in the normal force range of $0{\sim}1N$ with tactile sensor auto-evaluation system. The value of resistance is relatively increased linearly with normal force in the overall range. The variation rate of resistance is about 2.0%/N in the range of $0{\sim}0.6N$ and 1.5%/N in the range of $0.6{\sim}1N$. Also, the flexibility of the sensing module is adequate to be placed on any curved surface as cylinder because the matrix consists of polymer and metal thin film.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.2
• /
• pp.206-222
• /
• 2015

This work uses different finite element approaches to the free vibration analysis of reinforced shell structures, and a simplified model of a typical launcher with two boosters is used as an example. The results obtained using a refined one-dimensional (1D) beam model are compared to those obtained with commercial finite element software. The 1D models that are used in the present work are based on the Carrera Unified Formulation (CUF), which assumes a variable kinematic displacement field over the cross-sections of the beam. Two different sets of polynomials that correspond to Taylor (TE) or Lagrange (LE) expansions were used. The analyses focused on three reinforced structures: a stiffened panel, a reinforced cylinder and the complete structure of the launcher. The frequencies and natural modes obtained using one-dimensional models are compared to those obtained from classical finite element analysis. The classical FE models were built using a beam-shell or solid elements, and the results indicate that the refined beam models can in fact be used to investigate the behavior of very complex reinforced structures. These models can predict the shell-like modes that are typical of thin-walled structures that cannot be detected using classical beam models. The refined 1D models used in the present work provide results that are as accurate as those from solid FE models, but the 1D models have a much lower computational cost.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.8
• /
• pp.671-676
• /
• 2014

The vortex cup is proposed as a method to transport sensitive products such as silicon wafers in manufacturing. Air through the inlet nozzle located at the top of the vortex cup flows to form a swirl in the cylinder. The flow located in the lower part of the thin gap between the vortex cup and the bottom surface escapes and generates a negative pressure that can lift objects. In this research, three-dimensional numerical simulation of the air flow field in a vortex cup is performed, and a comparison of the simulation and experimental results shows very good agreement. In addition, the vortex cup length and shape that affect the negative pressure were applied to the analysis. Through the simulation results, optimum conditions for the vortex cup shape were proposed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.621-629
• /
• 1992

This study is concerned with an application of the Boundary Element Method to 2-dimensional elastoplastic stress analysis on the material nonlinearities. The boundary integral formulation adopted an initial stress equation in the inelastic term. In order to determine the initial stress increment, the increment of initial elastic strain energy due to elastic increment in stressstrain curve was used as the convergence criterion during iterative process. For the validity of this procedure, the results of B.E.M. with constant elements and NISA with linear elements where compared on the thin plate with 2 edge v-notches under static tension and the thick cylinder under internal pressure. And this paper compared the results of using unmedical integral with the results of using semi-analytical integral on the plastic domain integral.

• Korean Journal of Clinical Laboratory Science
• /
• v.39 no.2
• /
• pp.122-127
• /
• 2007

This study is a report about a specific patient whose primary stomach adenocarcinoma metastasized to uterine cervix adenocarcinoma. A thirty-nine year old female patient was initially diagnosed as having metastatic adenocarcinoma in the supraclavicular lymph node. Upon further examination, she was diagnosed with stomach adenocarcinoma. 8 months later, a cervix punch biopsy was performed. The stains used for examination were H&E stain, PAS stain, Alcian blue stain, Mucicarmine stain, Papanicolaou's (Pap.) stain, and as immunohistochemical stains, cytokeratin 7 and 20 were done. In the H&E stain, the tumor cells showed prominent and eccentric nuclei, thin nuclear membrane in abundant mucous cytoplasm, and cylinder shape. In the PAS stain, intracytoplasmic mucin vacuoles were stained with pink, and in Alcian blue and Mucicarmine stains, intracytoplasmic mucin vacuoles were stained with blue and red. As in the above results, she was diagnosed with undifferentiated adenocarcinoma. As found on the cytologic smear preparation of the uterine cervix stained by Papanicolaou's stains, the background was relatively clear, the number of malignant cells was relatively low, and large and eccentric nuclei in abundant cytoplasm were observed. Upon observing the tissue preparation of the uterine cervix biopsy by H&E stain, a clear background, large and eccentric nuclei, and a signet ring cell types were observed, and the number of malignant cells were fewer than in the primary uterine cervix adenocarcinoma. The vacuoles in cytoplasm were observed. The nuclear membrane and chromatin were thick and very rough, and upon observation by cytokeratin 7 and 20 of immunohistochemical stain, the tumor cells indicated a positive rate of 70% and 20%, respectively. According to these results, also she was diagnosed with metastasized uterine cervix adenocarcinoma. In summary of the results of pathologic findings on stomach biopsy and cytologic, histopathologic, and immunohistochemical finding on uterine cervix biopsy, the adenocarcinoma of her uterine cervix could assert the adenocarcinoma of signet ring cell type that was metastasized from the primary undifferentiated adenocarcinoma in stomach.

• Applied Microscopy
• /
• v.25 no.1
• /
• pp.1-14
• /
• 1995

The purpose of this study was to investigate the main sensory trigeminal nucleus in the aging rat brain by means of electron microscope. Male Sprague-Dawley rats, two (control group) and thirty six (aging group) months of age, were used. These animals were sacrificed by perfusion fixation with 2.5% glutaraldehyde-2.0% paraformaldehyde (0.1M phosphate buffer, pH 7.4) under sodium pentobarbital. The objective area was punched out with a sharp-edged metal cylinder of 0.8 mm in diameter. These blocks of tissue were then washed in 0.1M phosphate buffer, postfixed in 2% osmium tetroxide, dehydrated in a graded series of ethyl alcohol, and embedded in Epon 812. Thin sections were cut with Super Nova ultramicrotome, pick up on grids and double stained with lead citrate and uranyl acetate, and observed in JEOL 100B electron microscope. The results were as follows: 1. In the control group, the neuronal cell body of the main sensory trigeminal nucleus was filled with nucleus, Golgi complex, Nissl substance, mitochondria, microfilaments and microtubules. However, few Nissl substances are seen in neuronal cell body. Axoaxonic synapse, axodendritic synapse, axosomatic synapse, axospinous synapse, myelinated and unmyelinated nerve fibers were well organized around cell bodies. Neurons with abnormal changes were not seen. 2. In the aging group, the neuronal cell body of the main sensory trigeminal nucleus contained large number of lipofuscin granules, dense body and swollen mitochondria. Terminal boutons contained glycogen, crystal-like vesicle and membranous indicating first signs of degeneration. The dendrites were found to be in synaptic contact with altered axon terminals. Frequently axons filled with dark axoplasn and splitted myelin sheath were noticed.

• Computational Structural Engineering
• /
• v.9 no.3
• /
• pp.199-207
• /
• 1996

When an initially straight thin cylinder is bent, there is a tendency for the cross section to flatten. This phenomenon was investigated by L.G. Brazier in 1927 and is called "Brazier Effect" or "Brazier Theory". The main characteristic is the reduction of carrying capacity due to the decrease of bending stiffness by shortening of thickness with the increase of external load. And the relationship of curvature-bending moment becomes a soft spring type as shown in Fig.2. In this paper, the Brazier theory on plate type structures is investigated from the following view points : (1) What is the Brazier effect? (2) the reason of the occurrence of the Brazier effect in plate type structures by using beam model and (3) factors which cause the brazier effect.

• Applied Biological Chemistry
• /
• v.29 no.3
• /
• pp.241-247
• /
• 1986

The relationship between rice and the fluid during cooking was investigated to examine the factors affecting the quality of cooked rice and a new rice cooking method was proposed to improve the unpalatability of aged Milyang 23-long grain rice variety. The changes of heights of rice-bed and the fluid during cooking were measured with a laboratory cooking apparatus made of flat bottomed graduated glass cylinder. Around the boiling, a sudden disappearance of the fluid was observed and then thin film was formed on the rice grains. This film coating was fortified by the addition of 1-2%(w/w) of glutinous rice powder as a film forming agent. The artificial coating on the cooked rice of low quality remarkably improved the gloss, moisture content and shape and the extent of leaching of rice solid into the fluid was reduced with the treatment.