• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.266-274
• /
• 2010

This study aim to investigate fundamentally the growth and physiological responses of tomato plants in responses to two different levels of water deficit, a weak drought stress (-25 kPa) and a severe drought stress (-100 kPa) in soil. The two levels of water deficit were maintained using a micro-irrigation system consisted of soil sensors for the real-time monitoring of soil water content and irrigation modules in a greenhouse experiment. Soil water contents were fluctuated throughout the 30 days treatment period but differed between the two treatments with the average -47 kPa in -25 kPa set treatment and the -119 kPa in -100 kPa set treatment. There were significant differences in plant height between the two different soil water statuses in plant height without differences of the number of nodes. The plants grown in the severe water-deficit treatment had greater accumulation of biomass than the plants in the weak water-deficit treatment. The severe water-deficit treatment (-119 kPa) also induced greater leaf area and leaf dry weight of the plants than the weak water-deficit treatment did, even though there was no difference in leaf area per unit dry weight. These results of growth parameters tested in this study indicate that the severe drought could cause an adaptation of tomato plants to the drought stress with the enhancement of biomass and leaf expansion without changes of leaf thickness. Greater relative water content of leaves and lower osmotic potential of sap expressed from turgid leaves were recorded in the severe water deficit treatment than in the weak water deficit treatment. This finding also postulated physiological adaptation to be better water status under drought stress. The drought imposition affected significantly on photosynthesis, water use efficiency and stomatal conductance of tomato plants. The severe water-deficit treatment increased PSII activities and water use efficiency, but decreased stomatal conductance than the weak water-deficit treatment. However, there were no differences between the two treatments in total photosynthetic capacity. Finally, there were no differences in the number and biomass of fruits. These results suggested that tomato plants have an ability to make adaptation to water deficit conditions through changes in leaf morphology, osmotic potentials, and water use efficiency as well as PSII activity. These adaptation responses should be considered in the screening of drought tolerance of tomato plants.

• Korean journal of food and cookery science
• /
• v.16 no.6
• /
• pp.577-583
• /
• 2000

The purpose of this study was to investigate the effectiveness of various quality preservative treatments for extending shelf life and maintaining good quality of minimally processed fruit and vegetables produced in Korea. To determine the suitable treatments for delaying quality deterioration, fresh Asian pears and Chinese cabbages were sliced and treated with various quality preservatives (1% CaCl$_2$, 1% NaCl, 3% sucrose, 1% Ca-lactate, 1% vitamin C, 0.05% chitosan ＋1% vitamin C, 0.1% Sporix＋1% vitamin C, hot water (60$\^{C}$), 0.2% L-cysteine), packed with polyethylene film (60㎛-thick), and stored at 4$\^{C}$/0$\^{C}$ or 20$\^{C}$. Various biological and sensory tests were performed to evaluate the quality changes in minimally processed products. Results indicated that Chinese cabbages treated with 1% CaCl$_2$ at 4, and 1% CaCl$_2$ and 1% NaCl at 20$\^{C}$ were most effective in maintaining the quality and minimizing the biochemical changes during storage. For sliced Asian pears, 0.2% L-cysteine and 1% NaCl treatments were effective to reduce browning, and 1% CaCl$_2$ treatment was the most effective to prevent softening during storage at 20$\^{C}$ and 0$\^{C}$. Modified atmosphere packaging of Pleurotus ostreatus and Lentinus edodes had a significantly different shelf life depending on packaging material, packaging thickness and storage temperature. Sealed packaging with polyethylene film (60㎛-thick) for two kinds of mushrooms maintained a good quality with an extended shelf life by 30-50% at 20$\^{C}$ and by 30-130% at 0$\^{C}$. To minimize the quality deterioration which appeared in the condition of polyethylene film packaging, quality preservatives such as KMnO$_4$ and KHSO$_2$＋K$_2$S$_2$O$\_$5/ for SO$_2$ generation were added inside of mushroom packaging. The best condition for maintaining good quality longer was packaging with polyethylene film+SO$_2$ which showed 5080% extended shelf life for both Pleurotus ostreatus and Lentinus edodes at 20$\^{C}$ and 0$\^{C}$.

• Korean Journal of Food Science and Technology
• /
• v.24 no.6
• /
• pp.603-609
• /
• 1992

To investigate the effect of polyethylene film packaging and $CO_2$ treatment on tomatoes during storage, the gas composition in film, weight loss, the changes of color, hardness and several components were measured. The concentrations of $CO_2$ and $O_2$ in film were changed rapidly in early stage, but it kept a constant level after 7 days of storage. In 0.06 mm polyethylene film, $CO_2$ and $O_2$ concentration was kept a level of $4{\sim}6%$ respectively. The increase in $C_2H_2$ concentration was delayed in thick and $CO_2$ treated film. The rate of weight loss was 4% in non-packed tomatoes, but it recorded about 1% in 0.06 mm polyethylene film. Titratable acidity, pH and soluble solids were changed slightly, but the obvious differents were not observed according to film thickness and $CO_2$ treatment. The value of tomatoes was increased but L and b values were not changed greatly during storage. These color changes were restricted by 0.06 mm film and $CO_2$ treatment. The firmness and content of ascorbic acid were reduced during storage but it restrained by $CO_2$ treatment and film packaging. Sugar of tomatoes were composed of glucose, fructose and a very small amount of sucrose, and they were changed little during storage.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.320-325
• /
• 2020

This study aimed to analyze thermo-keeping and economic feasibility by utilizing silica aerogel, which has been attracting attention as a new material, complementing the disadvantages of the conventional multi-layered thermal screen, and producing and installing multi-layered thermal screen. The multi-layered thermal screen used in the experiment was produced in two combinations using a non-woven fabric containing silica aerogel and measured and compared the temperature and fuel consumption changes due to differences in practice with the multi-layered thermal screen being sold and used on the market. Experimental results show that the temperature and relative humidity changes due to the differences of the multi-layered thermal screens in the single-span greenhouse and the multi-span greenhouse were small but remained almost the same temperature and relative humidity. It is judged that this shows that the multi-layered thermal screen using silica aerogel is not inferior to the conventional multi-layered thermal screen. As a result of a comparative analysis of heating energy, the aerogel-based multi-layered thermal screen reduced fuel consumption by about 15% in the single-span greenhouse and about 20% in the multi-span greenhouse compared to the conventional multi-layered thermal screen. It is clear that heating energy is saved as a greenhouse size and duration increase. It was found that the silica aerogel-based multi-layered screen was more breathable and warmer than the conventional multi-layered thermal screen, but It was found that the multi-layered screen used in the multi-span greenhouse was heavier and stiff compared with the conventional multi-layered thermal screen, indicating less workability and operability. Therefore, improvements were applied to the multi-layered screens used in the single-span greenhouses. It was confirmed that the replacement of internal insulation materials reduced thickness and improved stiffness so that there could be sufficient possibility for farmers to use.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.4
• /
• pp.334-340
• /
• 2003

This study was conducted to evaluate the effects of dietary herbal extracts mixture on the growth rate. carcass traits and serological changes in finishing pigs. For the Exp 1, eighty Duroc(Yorkshir(Landrace pigs(81.58$\pm$3.20kg average initial body weight) were used in a 45 day experiment. Dietary treatments included 1) NC(negative control; antibiotics-free diet), 2) PC(positive control; NC diet added 0.1% of chlortetracycline), 3) NCM(NC diet added 0.1% of herbal plant mixture) and 4) PCM(PC diet added 0.1% of herbal plant mixture). Through the entire experimental period, ADG of pigs fed NCM and PCM diets was greater(P<0.08) than that of pigs fed NC diet. There was interaction of ADG(P<0.01) in pigs fed NC diet with herbal plant mixture compared to pigs fed PC diet with herbal plant mixture. ADFI and G/F tended to increase in PC and NCM treatments. However, there were not significantly differences among the treatments. Total protein of serum was improved by supplementation of the herbal plant mixture in NC diet(P<0.04). For the Exp 2. one hundred Duroc(Yorkshir(Landrace pigs(77.36$\pm$2.01kg average initial body weight) were used in a 28 day experiment. Dietary treatments included 1) NC(negative control; antibiotics-free diet), 2) PC(positive control; NC diet added 0.1% of chlortetracycline), 3) PM0.1(NC diet added 0.1% of herbal plant mixture) and 4) PM0.2(NC diet added 0.2% of herbal plant mixture). Through the entire experimental period, ADG tended to increase in PC treatment. However, there was not significantly difference among the treatments. Carcass weight in NC was higher than other treatments(P<0.06). Backfat thickness was higher in pigs fed PC than other treatments. However, there was not significantly difference among the treatments. A grade appearances of carcass tended to increase in pigs fed PM(P<0.09). In conclusion, the results of the experiments suggest that pigs fed PM could be a beneficial growth performance and serogical immunity for finishing pigs.

• Journal of radiological science and technology
• /
• v.29 no.4
• /
• pp.267-274
• /
• 2006

The evaluation of GB stones with ultrasound has proved to be useful procedure in patient with symptoms of cholelithiasis. GB is evaluated for size, wall thickness, presence of internal reflections within the lumen and posterior acoustic shadowing or enhancement in Ultrsonography. The patient position should be shifted during procedure to demonstrate further the presence of stone within the GB. Patient scanned at the Rt. subcostal region in supine, right lateral, Lt. down decubitus, and upright sitting position. So GB stone should shift to dependent area of GB. Often, GB is not markedly distended in the presence of cholethiasis, and so the diagnosis becomes more difficult. One of the more difficult areas for detection of a GB stones are embeded in the cystic duct region. And since the GB is adjacent to the duodenum and hepatic flexure, its may be difficult to visualizing a GB stone. When patient study position changes frome supine to other position, stones displaced the site. But if its are polyps, not changes the site whatever patient positions. It is very important to what make different GB stones or polyps. We have studied about mobility of GB stones according to the patients position(supine, Lt. down decubitus, $30^{\circ} LAO. sitting and hand-knee). So we have a result, stones wherever localized within the GB, changed 100% its position in the hand-knee position and the others appeared at least 90%. In this study, when a large stones are located through fundus-body and body-neck, does not changing the stones position in spite of varied patient's positions. But hand-knee positions can identified GB stones, because its make changed the position of stons from posterior wall to anterior wall within the GB. We recommend the hand-knee position for differentiation GB stones from polyps.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.335-341
• /
• 2009

Statements of problem: Adequate bone quality and quantity were important to achieve initial stability and to prevent early failures. However there were few published data available regarding the actual effect of dimensional change in implant geometry on initial stability. Purpose: The purpose of the current study was to investigate the influence of diameter and length changes on initial stability of implants. Material and methods: Four types of dummy bone (D1, D2, D3 and D4) consisted of cortical and cancellous layers with different thickness were simulated. Implants which had similar surface area to each other ($3.5{\times}13.0-mm$, $4.0{\times}11.5-mm$, $4.5{\times}10.0-mm$, $5.0{\times}8.5-mm$) were inserted in dummy bones. Implant stability as a function of peak insertion torque and resonance frequency values were recorded for each implant. Results: 1. Bone quality was a major influential factor to achieve initial stability (P <.05). 2. In D1, D2 and D3 dummy bones, implant stability quotient values were not significantly different to each other (P >.05), however insertion torques were increased with wider and shorter implants (P <.05). 3. In D4 dummy bone, implant stability quotient values and insertion torques were decreased with wider and shorter implants (P <.05). Conclusion: From a point of view of initial stability, it is suggested that use of wide and short implant may be helpful in avoiding bone augmentation procedures in area of adequate bone quality.

• Journal of Veterinary Clinics
• /
• v.27 no.5
• /
• pp.522-532
• /
• 2010

The aims of the present study were to characterize the effect of glucocorticosteroids (GCs) on the normal canine skin and to evaluate the effect of a lipid mixture (LM), containing cholesterol, pseudoceramide, and free fatty acid, on the steroid-induced damaged skin of dogs. Five beagles were involved and the skin of the back of each dog was topically applied with four kinds of GCs twice daily for 28 days. LM was applied after that period of GCs application. Transepidermal water loss (TEWL), skin hydration, and skin pH were assessed during experimental periods and histopathological evaluation was performed. TEWL was significantly increased, with a maximum increase obtained on day 28 (p < 0.01). Skin pH was significantly decreased, with a maximum decrease obtained on day 28 (p < 0.01). Skin surface hydration was significantly increased on day 3, but values of skin hydration were progressively decreased and finally reached those of baseline. In histology, as results of steroid application, losses of keratin layers in the stratum corneum and edematous changes in the upper parts of dermis, and consequently, thickness of the epidermis and the stratum corneum were decreased. In addition, the numbers of hair follicles were markedly decreased in steroid control as compared to intact control. However, these skin atrophic changes were markedly inhibited by treatment of LM as compared with steroid control in the present study. Moreover, all biophysical parameters were reached to the baseline after LM treatment. These results showed that the topically applied GCs induced skin barrier impairment and a LM should be effective on repair of disturbed skin barrier function in dogs. Therefore, it is concluded that a LM tested in the present study is expected to treat the steroid-induced skin damages.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 2007.11a
• /
• pp.79-92
• /
• 2007

Oxidative stress have known to be a risk factor for the degenerative processes and closely related to a lot of diseases. It is well established that antioxidants are good in protection and therapeutic means against oxidative damage. There is increasing interest in natural antioxidants and many natural antioxidants have been found and utilized as the possible protection for various diseases and skin aging. We have screened natural antioxidant agents for cosmeceuticals, nutraceuticals, and drugs as therapeutic and preventive means against oxidative stress, and have developed a number of novel antioxidants from various natural sources. A novel melanin synthesis inhibitor, Melanocin A, isolated from the metabolite of a fungal strain Eupenicillium shearii F80695 inhibited mushroom tyrosinase and melanin biosynthesis of B16 melanoma cells with $IC_{50}$ value of 9.0 nM and MIC value of $0.9\;{\mu}M$, respectively. Melanocin A also exhibited potent antioxidant activity by scavenging of DPPH and superoxide anion radicals. UV was found to increase the level of hydrogen peroxides and other reactive oxygen species (ROS) in skin tissues. This increase in ROS may not only alter the structure and function of many genes and proteins directly but may also modulate their expressions through signal transduction pathways and, ultimately, lead to skin damage. We investigated the effect of Melanocin A on UV-induced premature skin aging. Firstly, the effect of Melanocin A on UV-induced matrix metalloproteinase (MMP)-9 expression in an immortalized human keratinocyte cell line, HaCaT in vitro was investigated. Acute UV irradiation induced MMP-9 expression at both the mRNA and protein levels and Melanocin A suppressed this expression in a dose-dependent manner. We then investigated UV-induced skin changes in hairless mice in vivo by Melanocin A. Chronic exposure of hairless mouse dorsal skin to UV increased skin thickness and induced wrinkle formation and the gelatinase activities of MMP-2 and MMP-9. Moreover, Melanocin A significantly suppressed UV-induced morphologic skin changes and MMP-2 and MMP-9 expression. These results show that Melanocin A can prevent the harmful effects of UV that lead to skin aging. Therefore, we suggest that Melanocin A should be viewed as a potential therapeutic agent for preventing and/or treating premature skin aging. Terrein is a bioactive fungal metabolite isolated from Penicillium species. Terrein has a relatively simple structure and can be easily synthesized. However, the biologic effects of terrein are comparatively unknown. We found for the first time that terrein potently inhibit melanin production in melanocytes and has a strong hypopigmentary effect in a spontaneously immortalized mouse melanocyte cell line, Mel-Ab. Treatment of Mel-Ab cells with terrein (10-100 mM) for 4 days significantly reduced melanin levels in a dose-dependent manner. In addition, terrein at the same concentration also reduced tyrosinase activity. We then investigated whether terrein influences the extracellular signal-regulated protein kinase (ERK) pathway and the expression of microphthalmia-associated transcription factor (MITF), which is required for tyrosinase expression. Terrein was found to induce sustained ERK activation and MITF down-regulation, and luciferase assays showed that terrein inhibits MITF promoter activity in a dose-dependent manner. To elucidate the correlation between ERK pathway activation and a decreased MITF transcriptional level, PD98059, a specific inhibitor of the ERK pathway, was applied before terrain treatment and found to abrogate the terrein-induced MITF attenuation. Terrein also reduced the tyrosinase protein level for at least 72 h. These results suggest that terrain reduces melanin synthesis by reducing tyrosinase production via ERK activation, and that this is followed by MITF down-regulation.

• Journal of Animal Environmental Science
• /
• v.13 no.3
• /
• pp.201-210
• /
• 2007

In this study, physical properties of Elk antler was investigated to develop the optimum drying and packaging methods for improving the antler quality as well as deal with diversify of demand. After the antler was sliced with 5 mm thickness, and the compressive, shear, and tensile stresses were measured at the center and velvet parts of pre-dried and dried antlers after the contained water rate of the dried antlers was maintained below 10%. The results are as follows. 1. Considering the center of pre-dried antlers, the compressive stresses were $60.73\;g/mm^2$, $145.65\;g/mm^2$, and $260.97\;g/mm^2$, respectively at the upper, middle, and lower parts while $70.67\;g/mm^2$, $811.90\;g/mm^2$, $3,235.52\;g/mm^2$, respectively for velvet layer. Considering the center of dried antlers, the compressive stresses were $190.43\;g/mm^2$, $445.81\;g/mm^2$, and $705.86\;g/mm^2$, respectively at the upper, middle, and lower parts while $734.01\;g/mm^2$, $1,238.40\;g/mm^2$, $4,134.03\;g/mm^2$, respectively for velvet layer. 2. For the pre-dried, the shear stresses were $50.24\;g/mm^2$, $294.44\;g/mm^2$, and $423.47\;g/mm^2$, respectively, and $124.14\;g/mm^2$, $367.69\;g/mm^2$, and $425.86\;g/mm^2$, respectively for the dried antlers. 3. The tensile stresses were $13.59\;g/mm^2$, $62.85\;g/mm^2$, and $112.07\;g/mm^2$, respectively for the pre-dried and $77.24\;g/mm^2$, $175.87\;g/mm^2$, and $184.06\;g/mm^2$, respectively for the dried antlers. 4. In the case of drying antlers, the physical characteristics of the antlers was. changed such as moisture evaporation, contraction, and surface hardening. For the center part, the changes of the physical characteristics were more significant at the lower part while at the upper part for the velvet layer. 5. The stress changes of Elk antlers was shown very remarkably according to growth point. Moreover, the stress was clearly higher at velvet layer part to the center part, base parts compared to the upper parts.